Collection: Trailer hitch members/supplies

This is a ball mount removable hitch bracket for Toyota Land Cruiser 70/80 series, Nissan Safari, Mitsubishi Pajero (excluding V78 and later), Isuzumyu, Jeep, etc. that have mounting holes in the rear frame or bumper.

■Bolt hole pitch = height: 45mm width: 85mm
■Standard ball mount (bottom) height: -123mm from the bottom of the mounting bolt

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit and wiring bracket are not included.

■Compatible with: Spare tire for SUNTREX ■Tire size: 145/80R12-6PR
■Wheel size: 12×3.5 100 4H +35

■Material: Steel plating

■Size [Ball diameter / Housing width / Maximum towing weight]
TC-05: 1-7/8 inch / 62.5mm / approx. 907kg
TC-06: 1-7/8 inch / 75.0mm / approx. 907kg

[Caution] The plating may peel off or be scratched during transportation.

Trailer frame compatible with 50mm width
*Displayed size may vary depending on individual items.
*If there is any wobble even after tightening sufficiently, please prepare a separate spacer.

●Made of stainless steel with the highest durability and corrosion resistance.
●Stainless steel polished mirror finish emphasizes stylishness.

[Product specifications]
■Ball diameter: 2 inch compatible
■Mounting frame width: 50mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Stainless steel mirror finish
*There is also a product compatible with 75mm trailer frame. [Product number TC-03SUSP]

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm x 85mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

Hydraulic inertia brake for disc brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For drum brakes, product number ST-148-01

For drum brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For disc brakes, part number ST-148-02

●Product size: 95×45×10mm
●Mounting hole pitch: 39mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Sold in units of 1 piece ●For Solex 13 inch

●A hub and bolt set.
●4 holes PCD100 ●Offset +40
●Hub diameter: 64mm
●Bearings and oil seals are not included.
*Bearing kit part number: SRX-ST-006

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

SOREX genuine parts combination lamp

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Sales unit: 1 piece (2 pieces required when replacing left and right)
■Sold only in black
■Size: L845×W265mm
■For 10 inch wide tires

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・The shipping fee is [shipping fee x quantity] for each item.

●Set price includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

●Price includes shipping and includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Ordered products]

●For 1 wheel
●Leaf spring for NF-2K.

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*For back-ordered items, cancellations, changes, and returns are not possible after order confirmation (delivery date information)

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
ZERO series, S50G/N, 193SL, TWIN JT SW, 14FWG-FWB, 14FW-GW, 15FW-GW, 16FW, 17FW,
AT-500, NF-2

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

This is a [order item].

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
(S35B, S35G, 14FB/FG, NF-1/E, MB, LC150R, LF200, CAMPY〈K4〉, KC250/250K/350K)

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

●Sold in units of 1 piece ●For Solex 12 inch

For ST-004 and ST-021 hubs.

Size: W1/2-20

For PWC/black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

for boat MB

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[set content]
Bow tower, winch stand, bow roller, end cap, bolt, nut

For boat black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

For boats and galvanizers

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

This is a made-to-order product.

[Request when ordering]------------------------------------------ -------
The following items are required for product ordering:
When placing your order, please enter the following information in the Requests/Comments section:
Trailer model name
● Trailer year
●Stamp number (trailer) The number stamped on the front.
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←
---------------------- ---------------------------- -------------------

■ Sales unit: 1 piece (2 pieces required for left and right replacement)
■Only available in black
■Size: L845×W185mm
■For 12-inch tires

[Requests and precautions when ordering]---------------------------------------- ----------
The following items are required for product ordering:
Please fill in the following information in the request/remarks section when placing your order.
Model name
● Trailer year
●Stamp number (the number stamped on the front of the trailer.)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
・Shipping charges will be provided per unit (shipping charge x quantity).

[Ordered products]

■Adaptation: For wooden banks
■Size: 60×45×45

■Sales unit: 1 piece

■Compatibility: SW, 1150 series
■Please be sure to indicate the trailer model when ordering.
*If you are considering using this product on a model other than those listed above, please refer to the image that shows the size of the mounting part.
*In this case, we cannot confirm compatibility even if the model is presented at the time of ordering.
*Also, if you wish to arrange the product after confirming the image, please write in the notes section when ordering, ``I have confirmed the image, but would like to arrange the product without confirming the model.''

●One 13-inch wheel.
●Set includes inner and outer bearings, oil seals, and adjuster washers.

●A hub and bolt set.
●13 inch wheels for wide tires
●5 holes PCD114.3 ●Offset +0

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

■Set contents: stay, license lamp, rivet

[Please note] Riveters are required for installation.

●Lamp size: 102 x 51 x 28mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●For trailer installation. Comes with bolts. *Type with mounting holes on both left and right sides.

■Size: 156mm on one side
■Left and right screw pitch: 110mm

[Compatible with] 12 inches
[Contents] 1 wheel
(Inner, outer bearing, oil seal, adjuster washer)

●A hub and bolt set.
●12-inch wheels for wide tires
●5 holes PCD114.3 ●Offset +0

[Requests and notes when ordering]
*Shape and price may vary depending on the car model.
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 75mm compatible (inner dimensions: width 76mm x height 50mm)
■Material: Steel plating

*The following products are also available for external customers.
[Product number: Ball diameter/mounting frame width]
TC-03 2 inches/75mm

■BOX size: 463 x 252 x 385mm (approx. 37L)
■FRP
■Accessories: Mounting bolt (stainless steel), key

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

[Kit contents]

2 steel banks for SOREX, 4 mounting brackets ●Drilling is required for installation.

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Payment] Advance transfer/card payment only

●Foldable, large diameter hole.

■Wheel size: 8 inches (20.3cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 679kg
■Stroke: mm

A storage box that can hold portable cans and small items.

■Box size: width 550 x depth 265 x height 220mm
■U bolt for installation: 78x65mm

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Product information]
●Cannot be bundled...To prevent scratches and damage, items will only be shipped individually. "Combined packaging (combined packaging)" with other products is not possible ●Directly shipped products...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (combined packaging)" is not possible ●Payment method limitations...Bank transfer/credit card only ( (cash on delivery not possible)

●Large storage space at the front of the trailer that can store wetsuits, life jackets, etc.

(ZERO500 / S50 exclusive option)

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Product information]
●Cannot be bundled...To prevent scratches and damage, items will only be shipped individually. "Combined packaging (bundling)" with other products is not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed to SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed due to the special bow stop.

■Stainless steel■Included: Mounting bolts (size: Φ10x47x100mm) and 2 sets of nuts

●Steel slide retractable slope rail. When not in use, it can be easily stored inside the bank.

●Loading and unloading of PWC is possible without submerging the trailer in water. It can reduce corrosion of trailer tail lights, etc., and damage to undercarriage parts, such as hubs.

■Rail height 2,200mm, width 410mm
■Maximum load 500kg
*It may not be possible to install depending on the vehicle model.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

A cargo frame that can be easily DIYed into a country-style cargo trailer.

*Drilling into the loading platform is required for installation.

"set content"
Only 4 pillars
*Wood (1x4) and mounting bolts are not included. You can purchase it at home centers, etc.

galvanized

PCD114.3 5 holes

*There are some irregularities in the galva painting process.
Due to the large size of the item, shipping charges will be incurred.

13 inch tire/wheel/bracket set

[Required information when ordering]
Please be sure to fill in the following information in the request/remarks column.

●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

【please note】
*Please be sure to check the reply email as the shipping fee may be corrected depending on the delivery area.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information). *Shipping charges will be incurred for large items.