Accessories/Tools/Others (34 products)
-
Vendor:J-LINES
Wire Lubrication TOOL Jet Ski PWC
Vendor:●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.[Disclaimer]
*Color may vary depending on shipping time. please note that.T-131Sale price ¥1,500 Regular price¥1,500Regular price ¥1,500Unit price per (excluded_tax) -
Vendor:No Brand
Piston pin puller [Supports piston pins up to 20mm / bore 87mm] 012-152 Special tool
Vendor:【correspondence】
●Piston pin: up to 20mm
●Bore: up to 87mm[Application] SPECIAL TOOL for easily removing the piston pin, indispensable during overhaul.
JW012-152Sale price ¥9,500 Regular price¥9,500Regular price ¥9,500Unit price per (excluded_tax)Sold out -
Vendor:No Brand
cylinder honing 280 tool tool
Vendor:■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.JM067301Sale price ¥3,500 Regular price¥4,980Regular price ¥3,500Unit price per (excluded_tax)Sale -
Vendor:No Brand
Hose clamp pliers wire type 19-757
Vendor:■Body size: 270mm
■Wire total length: approx. 590mm
■Maximum opening width: 42mm
■Weight: 515g[Application] Tool for removing hose clamps located in hard-to-reach areas where workability is poor.
● Remote control via wire allows work to be done in areas where conventional pliers cannot reach.
●The structure of the pliers allows them to be locked when squeezed.JL19757Sale price ¥7,200 Regular price¥7,200Regular price ¥7,200Unit price per (excluded_tax)Sold out -
Vendor:No Brand
Wire Terminal Tool 19-568 Tool
Vendor:[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types
Remove the terminal from the connector without causing damage.
JL19568Sale price ¥1,200 Regular price¥1,200Regular price ¥1,200Unit price per (excluded_tax) -
Vendor:No Brand
Valve spring compressor 19-255
Vendor:■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mmA must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm[Included]
Valve attachment x 2 (●short, ●long)JL19255Sale price ¥6,800 Regular price¥6,800Regular price ¥6,800Unit price per (excluded_tax) -
Vendor:No Brand
JL191141 Horse Pinsars 2 pieces 19-1141 Tool
Vendor:The small body makes it convenient for use in narrow spaces.
[Material]
■Body part: Zinc
■Bolt part: Steel
[Size] Approx. 55 x 40 x 13 (mm) ■Clamp size: 20 (φmm)
[Contents] 1 pair (2 pieces)[Application] Used to stop hose lines.
JL191141Sale price ¥1,280 Regular price¥1,280Regular price ¥1,280Unit price per (excluded_tax) -
Vendor:No Brand
JL16002S Detente tool Hole diameter Ф2.15
Vendor:●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.JL16002S Hole diameter Ф2.15
*Please note that colors may vary depending on the season.
JL16002SSale price ¥1,600 Regular price¥1,600Regular price ¥1,600Unit price per (excluded_tax) -
Vendor:J-LINES
JL006 Silicone tape 19mmx3m
Vendor:It has excellent water and oil resistance and can be used underwater without using adhesives.
Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.●High heat and cold resistance operating temperature range (℃): -56 to 260.
JL006-2Sale price ¥364 Regular price¥1,600Regular price ¥364Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Clearance Sale] Multi-Flywheel Puller ET-7846FP Tools DIY
Vendor:[Applications] A highly versatile puller that can be used for pulling out steering wheels, flywheels, motorcycle crankcases, gears, etc.
[Usage range] 38-96(mm)
[Tools used] 14mm wrench (*not included)
[set content]
・1 puller body
・1 center screw
・3 center screw adapters
・3/8” (24TPI) x 1-1/2” puller bolts 3 pieces
・3/8” (16TPI) x 2” puller bolts 3 pieces
・3/8” (16TPI) x 3” puller bolts 3 pieces
・2 3/8” (16TPI) x 4-1/2” puller bolts
・2 5/16” (18TPI) x 6” puller bolts
・3 5/16” (18TPI) x 3-1/2” puller bolts
・2 5/16” (24TPI) x 3” puller bolts
・3 5/16” washers
・2 1/4” (28TPI) x 2-1/2” puller bolts
・2 1/4” washers
・M10 (P1.5) x 35mm puller bolt 3 pieces
・3 10mm washers
・M8 (P1.25) x 45mm puller bolt 3 pieces
・M8 (P1.25) x 65mm puller bolt 2 pieces
・M8 (P1.25) x 90mm puller bolt 2 pieces
・3 8mm washersET-7846FPSale price ¥4,500 Regular price¥7,800Regular price ¥4,500Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Clearance Sale] Pilot Screwdriver Tool 1060PD ET-1060PD
Vendor:■Total length: 497mm
●This is a driver exclusively for adjusting the pilot screw of the carburetor.
*Cannot be used for high torque tightening or loosening.[Set contents] 1 piece each
■Body ■Auxiliary handle
■Bit: +35mm, +58mm, -23mm, -28mm, -35mm, -58mm, -95mmET-1060PDSale price ¥5,400 Regular price¥14,500Regular price ¥5,400Unit price per (excluded_tax)Sold out -
Vendor:No Brand
[Clearance Sale] Angle Torque Gauge 985-165 Special Tools Jet Ski 4stroke
Vendor:[Application] Used for angle tightening during 4-stroke engine assembly.
【how to use】
1. Use a torque wrench to tighten to the specified torque before use.
2. Set the gauge to 0 and fix the main body with an L-shaped arm so that it does not move.
3. Then check the angle indicated by the gauge and tighten to the determined angle.【detail】
Torque angle socket drive gauge: 1/2 inch
Torque angle readout range gauge: 0-360 degrees
Torque angle gauge reading increment: 2 degrees985-165Sale price ¥3,990 Regular price¥5,000Regular price ¥3,990Unit price per (excluded_tax)Sale -
Vendor:No Brand
Safety wire twister 84-76006
Vendor:[Application] Ideal for locking 2 to wire
An indispensable item for installing seals, grips, etc.84-76006Sale price ¥2,500 Regular price¥2,500Regular price ¥2,500Unit price per (excluded_tax) -
Vendor:TOKAI-P
0967 Hose attachment/detachment puller 0967 12-0002 Tool
Vendor:Press the tip of the puller against the hose and pipe you want to remove,
The hose can be easily removed by squeezing the handle.■Can be used for pipes with hose size 4 to 13 mm
■Total length: 20cm0967Sale price ¥2,000 Regular price¥2,000Regular price ¥2,000Unit price per (excluded_tax)Sold out -
Vendor:No Brand
[Clearance Sale] 0957 Dismantled Piston Compressor
Vendor:[Reason for outlet sale] Special price to replace inventory.
*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.● Band width: 38mm
●Diameter: Can be used with pistons from 54 to 127 mm.The band that tightens the ring is a quick release type that can be easily removed and attached by removing the clip.
0957Sale price ¥2,980 Regular price¥5,500Regular price ¥2,980Unit price per (excluded_tax)Sale -
Vendor:No Brand
floating polyethylene bailer
Vendor:This is the most basic form of limescale pumping.
[Product specifications]
■Material: Made of floating polyethylene
■Size: H85 x W140 x D190mm【please note】
*Please note that the color may differ from the photo depending on the arrival time.07103Sale price ¥750 Regular price¥750Regular price ¥750Unit price per (excluded_tax) -
Vendor:No Brand
Pump gauge tester 006-530
Vendor:[Application] A tool to measure the pop pressure of the valve seat.
●Used for carburetor setting and tuning.
006-530Sale price ¥10,000 Regular price¥10,000Regular price ¥10,000Unit price per (excluded_tax) -
Vendor:WSM
Flywheel Remover SEA-DOO 003-322 WSM
Vendor:[Compatible] SEADOO 3 hole 8mm bolt
[Application] Flywheel removal tool003-322Sale price ¥12,000 Regular price¥12,000Regular price ¥12,000Unit price per (excluded_tax) -
Vendor:WSM
Flywheel puller SEA-DOO for 800/951
Vendor:[Compatible with] SEADOO 800/951
[Application] Flywheel removal toolGSX 800(1996-1997)
GSX RFI 800(1999-2000)
GTI LE RFI 800(2003)
GTX 800(1996-1997)
GTX RFI 800(1998-2002)
SPX 800(1997-1999)
XP 800(1995-1997)
GSX LTD 951(1997-1999)
GTX DI 951(2000-2003)
GTX LTD 951(1998-1999)
LRV 951(2000-2001)
LRV-DI 951(2002-2003)
RX 951(2000-2002)
RX-DI 951(2000-2003)
RX-X 951(2001)
XP 951(2000-2002)
XP-DI 951(2003)
XP-LTD 951(1998-1999)
GTX 1503(2002-2006)
GTX-LTD SuperCharged185 1503(2003-2004)
GTX SuperCharged185 1503(2003-2006)
RXP SuperCharged215 1503(2004)003-321Sale price ¥9,000 Regular price¥9,000Regular price ¥9,000Unit price per (excluded_tax) -
Vendor:WSM
Flywheel Remover KAWASAKI 440-650 Tool 003-319 WSM Jet Ski JETSKI
Vendor:[Adaptation] KAWASAKI 440-650 engine
[Application] Flywheel removal tool●3 hole 8mm bolt
【Guidance】
If you are using it on a boat equipped with a 750/800 engine, please purchase "003-317".003-319Sale price ¥8,500 Regular price¥8,500Regular price ¥8,500Unit price per (excluded_tax)Sold out -
Vendor:WSM
Flywheel Puller KAWASAKI Tool for Kawasaki 900/1100 003-318 WSM
Vendor:[Applicable models] KAWASAKI Kawasaki 900/1100
[Application] Flywheel removal toolSTS 900(2001-2002)
STX 900(1997-2006)
ZXi 900(1995-1997)
STX 1100(1997-1999)
STX-DI 1100(2000-2003)
Ultra130-DI 1100(2001-2004)
ZXi 1100(1996-2003)003-318Sale price ¥9,000 Regular price¥9,000Regular price ¥9,000Unit price per (excluded_tax) -
Vendor:WSM
Flywheel Puller KAWASAKI Tool for Kawasaki 750/800 003-317 WSM
Vendor:[Application] Flywheel removal tool
[Applicable models] KAWASAKI 750 to 800 engine【Guidance】
If you are using it on a boat equipped with a 440-650 engine, please purchase "003-319".Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki ST 750 1994-1995
Kawasaki STS 750 1995-1997
Kawasaki STX 750 1998
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki XiR 750 1994
Kawasaki ZXi 750 1995-1997
Kawasaki SX-R 800 2003-2011003-317Sale price ¥4,600 Regular price¥4,600Regular price ¥4,600Unit price per (excluded_tax) -
Vendor:SEA-DOO
Genuine SEADOO Ring Gear Puller ASSY Special Tool [For 800/951] BRP #420976235
Vendor:[Adaptation] SEADOO 800/951 engine
●A support tool used when removing flywheel bolts.[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1. Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" inside the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.420976235Sale price ¥9,150 Regular price¥9,150Regular price ¥9,150Unit price per (excluded_tax) -
Vendor:SEA-DOO
Genuine SEADOO Pliers Tools PWC Personal Water Bike Water Ski BRP #295000054
Vendor:●A tool for crimping bands on fuel hoses, engine boots, etc.
[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.295000054Sale price ¥20,300 Regular price¥20,300Regular price ¥20,300Unit price per (excluded_tax) -
Vendor:No Brand
Portable Bilge Pump 480mm PLASTIMO Hand Bilge Pump
Vendor:●Size: 480mm
●0.50L/1 stroke
●With hose
●Bilge can be discharged by moving the lever up and down with a manual bilge pump. It is very convenient to have one on the ship.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.
37544Sale price ¥5,000 Regular price¥5,300Regular price ¥5,000Unit price per (excluded_tax)Sold out -
Vendor:Attwood
attwood hand bilge pump 34136 11595-2
Vendor:■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.34136Sale price ¥8,700 Regular price¥8,700Regular price ¥8,700Unit price per (excluded_tax) -
Vendor:No Brand
Anti-vibration adhesive PRO7 PS-N1001C 100×100 (1 piece) 33013 PRO7
Vendor:●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.
●When used as a single piece, it is compatible with items weighing up to 100 kg.
*It can be easily separated into small pieces with scissors, etc., and if all of them are attached to the bottom of the device, the same load capacity can be obtained.●Size: width 100x width 100x thickness 5mm
●Contents: 1 piece
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃33013Sale price ¥3,400 Regular price¥3,610Regular price ¥3,400Unit price per (excluded_tax)Sold out -
Vendor:No Brand
Anti-vibration adhesive PRO7 PS-N3406C 30×40mm (6 pieces) PRO7 33012
Vendor:●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.
●When using 6 sheets, it is compatible with objects weighing up to 75 kg.●Size: width 30x width 40x thickness 5mm
●Contents: 6 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃33012Sale price ¥3,200 Regular price¥3,330Regular price ¥3,200Unit price per (excluded_tax)Sold out -
Vendor:No Brand
Anti-vibration adhesive PRO7 PS-N30C 30×30mm (4 pieces) PRO7 33011
Vendor:●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use this product to prevent large furniture such as TVs, computers, and refrigerators from falling over, as well as small items such as vases and works of art.●When using 4 pieces, it is the perfect size for securing electrical appliances and accessories such as microwave ovens and rice cookers.
●Suitable for items weighing up to 40kg. (When using 4 sheets)●Size: 30×30mm
●Contents: 4 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃33011Sale price ¥2,100 Regular price¥2,210Regular price ¥2,100Unit price per (excluded_tax)Sold out -
Vendor:BMO
High pressure pump High/low pressure automatic switching type electric air pump BM-SP2000V Banana boat Rubber boat SUP
Vendor:[Product specifications]
●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.
●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.
●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.
[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.27790Sale price ¥26,900 Regular price¥28,400Regular price ¥26,900Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Stock clearance] Piston ring puller compatible with ring thickness 1.2 to 6.3 mm 8634
Vendor:[Outlet reason] Special price for stock replacement
*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.8634Sale price ¥990 Regular price¥2,095Regular price ¥990Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Clearance Sale] POWERBUILT Ratchet Box Handle 12mm TOOL 5199
Vendor:[Reason for outlet sale] Special price to replace inventory.
*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.POWERBUILT Ratchet Box Handle 12mm
5199Sale price ¥1,390 Regular price¥2,800Regular price ¥1,390Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Clearance Sale] POWERBUILT Ratchet Box Handle 10mm TOOL 5198
Vendor:[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.POWERBUILT Ratchet Box Handle 10mm
5198Sale price ¥990 Regular price¥2,500Regular price ¥990Unit price per (excluded_tax)Sale -
Vendor:No Brand
[Clearance Sale] Fluid Hose Clamp for Hose Diameters up to 13mm 3254
Vendor:[Reason for outlet sale] Special price to replace inventory.
*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mmThe lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.3254Sale price ¥990 Regular price¥1,800Regular price ¥990Unit price per (excluded_tax)Sale