Collection: launcher stand sling

●Wide range of support from single to tandem!
●You can easily and safely hang and lower the jet by simply hooking it to the side of the jet.
●A must-have item for car lifters and cranes.

【Product details】
■Maximum lifting load: 500kg
■Plate dimensions 14cmX60.5cm

[Material]
■Hook: Aluminum
■Hanging hardware: Stainless steel
■Belt: made of cloth

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*Nylon pin bearing only. Other parts are not included.

Same product as jet launcher standard equipment.

■10Ф
■Made of stainless steel
jet launcher repair parts

[Suitable for] 2-stroke stand-up single-cylinder boats only. *Please use the "J-150" series for the 1500SX-R. *

[Model Number] J-130SX / Jet Launcher Compact for 2-wheel single ■ Size (total length x total width x rail width): 1920 x 850 x 300 mm
Total weight: 20kg
Frame weight: 9kg
■Material: Aluminum ■Notes: Sliding rails and hooks are standard equipment
If you are looking for only the handle pipe, the separately sold part number "JS201" is the corresponding part number.

Compared to the conventional J-1300, the frame can be easily disassembled and made compact because it is assembled with only pins. The handle pipe is angled downwards, making it easy to lift up! This item is rust-resistant, lightweight and compact.

[About payment and packaging]
This is a product shipped directly from the manufacturer. Only prepayment is available (cash on delivery is not available)
●Cannot be bundled

Due to the durable sling belt type belt with a long plate and a width of 50 mm,
Runabout boats can also be lifted stably.

The plates are poly-coated to prevent scratches on the boat.

[Product specifications]
■Plate (length x width): 830 x 50mm
■Plate part: Aluminum poly coating processing
■Maximum load: 500kg
■With anti-slip pad

[Applicable] Kawasaki 1500SX-R (2017~)/SEADOO Spark, etc.
[Product number] J-150S / Jet Launcher 4 wheels

■Size (full length x full width x rail width): 2050 x 820 x 300mm
■Total weight: 31kg
■Frame weight: 13kg
■Material: Aluminum

●1.4 times stronger than conventional frames
●Each bracket part is fixed with M8 bolts and nuts without any play.
●The frame is long and well-balanced to match the length of the boat, and the axle has been strengthened to withstand the weight of 4 cycles.
●The axle shaft is the same as the jet launcher for runabouts (left and right pipes), and the collar between the axle frame and the shaft is made of glass fiber-containing plastic molding and is tightly fixed without play.
●The handle has a bar grip type shape so that it can be easily carried by two people on both sides.
By extending the overall length and raising the ground clearance slightly, you don't have to worry about the machine hitting the ground even when lifted diagonally.

*Please replace the shaft and plastic collar regularly.
*2 to 3 people are required for loading at the water's edge and transporting on the sandy beach.
*We recommend that the loading direction be towards the rear of the boat, with the handle facing the handle, but when carrying the load in the opposite direction, be careful not to damage the handle due to excessive load or to prevent the ride plate at the rear of the boat from hitting the ground. please.
*Watercraft products are not included.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Model Number] J-1480-4X / Jet Launcher 4-wheel [Application] Compatible with all models (suitable for tandem and runabouts) * Center reinforcement frame included

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 37kg
Frame weight: 12kg
■Sliding rails and hooks are standard equipment

[Double hook specification]
Even models in the 300kg class can be moved easily and smoothly.
To change direction, lift the handle and set it in the 2W position, and the angled handle makes it even more convenient. Compared to a 2-wheeler, you can move even large, heavy boats just by pushing without having to lift and balance them.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

■Material: Stainless steel
■Sales unit: 1 piece

-A kit that allows you to change the 2-wheel launcher to a 4-wheel type.

*However, cannot be installed on "J-130SX Single Compact" *Processing work such as length cutting is required.

*Please note that the types differ depending on the model.
★JL222: J-130/J-1300/J-1300X *J-130SX cannot be installed ★JL223: J-1480/J1480X

[Product information]
●To prevent scratches and damage, only single items can be shipped and cannot be bundled with other products. ●Cash on delivery or combined packaging is not possible as they are shipped directly from the manufacturer.

D-ring
■The company's bearing tires
A / B / F / G compatible

jet launcher repair parts

[Product specifications]
■A tire bearing included ■Air tire with tube

■Tire outer diameter: 385φ
■Tire width: 90mm
■Shaft diameter: 25.4Ф
■Boss width: 82mm
■Weight: 2.5kg
■Tire stamp: 4.8/4.00-8
■Wheel stamp: 220-70
■Air pressure: 0.8-1.0kg

【please note】
It may not be possible to use it with conventional launchers.
If you need confirmation, please contact us at the time of ordering.
(Please note that we cannot confirm compatibility with other companies' products)

[Product information]
●To prevent scratches and damage, you cannot specify "combined packaging" with other products.
-This product is shipped directly from the manufacturer, so "cash on delivery" and "combined packaging" are not possible.

*We cannot accept delivery to private residences as this is a limited delivery item specified by a corporation/trade name (work place, etc.). *
Currently, we are unable to reflect the regular shipping charges when placing an order.
Therefore, please note that we will correct the specified shipping fee and provide new information.

●Hokkaido ¥18,700
●Tohoku ¥10,450
●Kanto/Shinetsu ¥9,900
●Hokuriku/Chubu/Kansai ¥9,900
●Chugoku/Shikoku ¥8,800
●Kyushu ¥9,900
*For Okinawa and remote islands belonging to each prefecture, we will provide a quote on a case-by-case basis, so please let us know.

●This is a boat platform that is ideal for maintenance and display of PWCs, boats, etc.
●Height can be adjusted to match the trailer loading platform.
●Equipped with locking swivel casters (2 on each side) for easy movement.
●The surface of the frame is galvanized (hot dip galvanized) and has excellent corrosion resistance.
*The bank part is made of wood*

[Notes when ordering]
*Since this is a made-to-order item, we cannot accept cancellations or changes after ordering.
*As this is a limited-edition product for corporations, we cannot accept delivery to private residences.

[Product specifications]
-Total length x height x width: 1,830 x 430 x 690mm
-Fixed casters x 2, flexible casters (with stopper) x 2

[Product information]
●Cannot be bundled...To prevent scratches and damage, "combined packaging (combining)" with other products is not possible.
●No returns or exchanges...Due to the characteristics of the product, we cannot accept returns or exchanges after shipping.
●Directly shipped items...Due to their large size, they will be shipped directly from the manufacturer.
●Items with designated shipping charges...Please check the shipping instructions.
●Cash on delivery payment not possible

FACTORY ZERO Factory Zero Jet Launcher
[Compatible products] J-130S / J-130SX
(1300X for two wheels is a separate product "Product number: JL101X")

Factoryzero Jet Launcher Repair Parts

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*This product only comes with a nylon cap.
*Please refer to the image for size. (Please use this as a guide as there are individual differences)

●Sold in units of one.

・Black reinforced wheels are cool!
・Beach Tote tires with nylon bearings.
-Can also be used with Factory Zero's jet launcher and jet bank.

[Product specifications]------------------------------------------------- --
●Air pressure: 0.8~1.0kg
●Tire width: 10 inches
●Shaft diameter: 25.4Ф
●Offset amount: 0mm
●Weight: 5.7kg
●Tire size: 18×9.50-8

[Product contents]------------------------------------------------- ---
・Tubeless air tire x 1,
・Black color plastic rim x 1,
・Nylon bearing x 2,
・Nylon cap x 2

[Product information]----------------------------------------
●Cannot be bundled...To prevent scratches and damage, "combined packaging" (combined packaging) with other products is not possible.
●When purchasing multiple items...2 items will be sold in small quantities, and small shipping charges will be applied depending on the number of items purchased.
*Example: For 1 piece...Shipping fee x 1 piece, for 3 pieces...x2 pieces, for 5 pieces...x3 pieces*

●Towing speed: 5km/h or less (suitable for towing buggies, etc.)
●Attachments: Bolts and special spacers

【please note】
Powered towing using this coupler is not a trailer, so it cannot be towed on public roads.
Towing speed: Please strictly observe the use at 5km/h or less. (Cannot be used on uneven roads even if it is less than the value on the left)
When bouncing, the instantaneous load is 2 to 3 times the weight, which can damage parts such as the axle shaft.

We also have the "JB104SUS reinforced axle shaft kit" for heavy boats.
If you are towing with power, we recommend replacing it.

FACTORYZERO Factory Zero Jet Launcher
[Compatible products] For J-1480, J-1480-4, J-1480-4X
[Size] Width from center to center of pipe is 480mm

The handle pipe has an angle that bends downward, making it easier to lift it out of the water.
Factoryzero Jet Launcher Repair Parts

FACTORYZERO Optional item for jet bank manufacturers. Stronger than regular products by welding.

*Sold starting from 1 piece.
*If you are ordering one, please specify "left or right" when looking at the jet bank from behind.

[Product information]
●Cannot be bundled...In order to prevent scratches and damage, items cannot be shipped together (combined) with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" or "combined packaging (bundling)" is not possible.

●“Reinforced axle shaft kit” for heavy boats. 260mm.
●If you are towing with power, we recommend replacing it.

●Adaptation: Kawasaki 1500SX-R
●Size 1400×360×300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

The extra-thick round pipe joint and strong frame design allow for safe use. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
It can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Adaptation: PWC up to 3 people
●Size: J-345SX 1400x380x450mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: Sliding rail standard equipment

racing beach stand runabout

It has a strong frame design with an extra-thick round pipe joint and a total of 4 W belts on one side to prevent opening, so it can be used safely even on heavy boats. In addition, the rail section has a sliding rail that prevents the boat from getting scratched and allows you to easily place it on the boat.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

●Applicable: Single boat only
●Size: J-333SX 970x350x300mm
●Material:
Frame: Made of aluminum, surface special alumite processing treatment
Rail part: J-333SX is equipped with a PVC cover as standard

racing beach stand single

The round pipe joint makes the frame even stronger, so you can use it with confidence on your precious boat.
In addition, the rail part has a PVC cover, so the boat can be easily mounted without getting scratched.
Can be folded with one action.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

■For 4-wheel SUV/LRV
■Total length x total width x rail width: 3,360 x 1,160 x 520mm

Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

■4 wheels with strong stainless steel winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

■Standard 4 wheels with winch
■Total length x total width x rail width: 3,110 x 1,160 x 520mm
■Total weight: Approximately 41kg
■Frame weight: Approx. 25kg

By adopting a long frame, even large boats can be loaded in a well-balanced manner.
Equipped with a hand winch and a suberle rail, it is easy to pull it up from the water.
It can turn around like a compass around the rear wheels, and the width of the vehicle fits within the hull, so it can be used in narrow spaces.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,200 x 960 x 661mm
■Frame: 70mm square
■Caster diameter: 150Ф

The 4-point support prevents front and back misalignment, making sling belt work easier.
Uses flexible and fixed casters of 150φ, allowing smooth movement over a long period of time.
Also, due to its large diameter, it rolls smoothly.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only (cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: J-210 PWC up to 3 people
■Total length x width x height: 1350 x 709 x 275mm (rail width: 440/340mm)
■Frame: 380mm square
■Caster diameter: 100Ф

*"J-209 Maintenance Stand High Grade" is recommended for boats weighing close to 500 kg.

Lowering the rail section improves runabout maintenance work efficiency!
The rail width is adjustable and all casters have stoppers.
Made of aluminum and specially anodized, it is lightweight and will not rust.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,340 x 955 x 410mm (rail width: 580mm)
■Frame: 70mm square
■Caster diameter: 125Ф

Since it uses anodized corrosion-resistant aluminum pipe (high strength pipe with center rib), it can be used with confidence even on lightweight and sturdy 500kg class boats.
Comes with a hook and rope to prevent it from slipping off.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■J-203S Single
■Total length x width x height: 1416 x 590 x 600mm (rail width: 300mm)
■Caster diameter: 100Ф

With a height of 600mm, this stand makes maintenance work on single boats easy.
The beautiful surface finish with special alumite treatment is perfect for display.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Compatible] Kawasaki SX-R (2017-)/SEADOO Spark, etc.
[Model Number] J-150S / Jet Launcher 2-wheel

■Size (total length x total width x rail width): 2050 x 820 x 300 mm
Total weight: 23.5kg
Frame weight: 12.5kg
■Material: Aluminum

[About payment and packaging]
Manufacturer direct delivery products
●Payment only (cash on delivery not available)
●Cannot be bundled

[Model Number] J-1480X / Jet Launcher 2-wheel rail width 480mm type [Suitable for] Tandem / Runabout models

[Product Specifications]
■ Overall length x overall width x rail width: 2,160 x 1,070 x 480 mm
■ Total weight: 22kg
Frame weight: 10kg

Made of aluminum, it is lightweight and rust-free, and each joint is bolted and welded for excellent durability.
Nylon roller bearing plastic wheels and block pattern tires make it easy and smooth to move around!
It is 30mm wider than the previous 450mm width.

[About payment]
This product is shipped directly from the manufacturer, so payment can only be made by bank transfer. (Cash on delivery is not available.)

[About shipping]
For this product, if the recipient is a private residence, a delivery fee may be required in addition to the invoice amount.

[Product number: 31552] For jet sling harness

4 pieces are required when replacing 1 unit.

[Disclaimer]
*Please note that the belt color may change without notice.

■For PWC single boats

A new beach stand that can be easily assembled by simply inserting a pin is now on sale.
Compatible with single model.

The frame is made of aluminum material that is 1.5 times thicker than regular aluminum and has excellent strength.

The rail (the part that contacts the bottom of the ship) is made of reinforced plastic and has excellent corrosion resistance, strength, and water resistance.
"Does not absorb water! Will not rot! Will not rust! Will not peel or hang!" This is the ideal beach stand.

- When assembled: total length 1210 x total width 710 x height 345 mm (inner width of the bar part on which the hull is placed 300 mm, outer width 380 mm)
●Body weight: Approximately 13kg

[Product precautions]
●Cannot be shipped together with other products (to prevent scratches and damage)
●There may be small scratches due to friction during transportation, etc.