Collection: lights

Can also be used for SOREX, TIGHTJAPAN, and blast trailers!

●Applications: license plate lights, side markers, backlights, etc.
●Mounting screws are not included. Please prepare separately.
●Equipped with 4 LED lights
-Size: 52 x 101 x 27mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.

- Lamp size: 102 x 51 x 28mm

●Water resistant specifications

●Sold per unit

It has a ``water resistant'' design that can withstand water from above, such as rain and car washes.
Avoid submerging the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[In 2018, the white base has been changed to a black base. ]

■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

◆For ZERO 500Z Avanzard◆
*Triangular reflector is not included.

[Advanced LED combination lamp limited model special specification]
・Bronze color reflector gives a sharper rear view
・Changed to a bright red light bar
・Advanced sequential turn lamp

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.
[Example: ZERO500S: 2 Ф13 holes required on the trailer frame]

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ----------------------------

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

[Ordered products]

●Narrow type: Uses LEDs with a narrow irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- ----------------------------

Triangle reflector with built-in LED 18 chips
Waterproof performance that clears IP67 standard

●Size: 160mm on one side
●Lights up in conjunction with brake and small.
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

●Trailer side waterproof connector

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

●Product size: 95×45×10mm
●Mounting hole pitch: 39mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

SOREX genuine parts combination lamp

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Set contents: stay, license lamp, rivet

[Please note] Riveters are required for installation.

●Lamp size: 102 x 51 x 28mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●SOREX license lamp.

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible

*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

-Size: 125 x 238 x 50mm (length x width x thickness)
●24V compatible
●Sold as one unit per side (common shape for left and right)

The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
Set includes raise lamp, smoothing cover, bumper base, and number bracket.
"RAYS Tail Lamp Kit" is also available. Product number 1216-61, 1216-62, 1216-63

■Size: 125 x 238 x 50mm (length x width x thickness)
■24V compatible
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
This is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
There is also a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63, 1216-64

Please note that we are currently accepting reservations as this item will be restocked around the end of October 2022.

-Size: 120 x 120 x thickness 30mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

back lamp
Size: Height 105 x Width 30 x Thickness 30mm

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

It lights up in conjunction with the small light, improving the visibility of following vehicles.

●Sold in units of 1 piece.
●Size: 1 side 160mm

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.