Collection: sponson

[Compatible models] SEADOO SPARK

This provides dramatically improved control when cornering and in rough conditions.
It can be installed by bolting onto the original holes.

[Compatible models] SEADOO SPARK Spark

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

For ULNIMITED full billet sponsons (UL53200)

aluminum billet

Contents: 4 pieces

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Support] M8 flat head screw

[Quantity] 1 piece
*Usually countersunk screws require counterbore processing on the mating material,
By using rosette washers, you can use countersunk screws without machining.

Be stylish with your favorite color! Also good as a design element!
You can also dress it up by replacing the bolts that secure the sponsons.

[Compatible models] YAMAHA FX SVHO(19-)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Applicable model] SEADOO GTX-L300 (18 years model -)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates.
4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] SEADOO
RXT-X300 (18 years onwards)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates. 4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] YAMAHA
FZS SVHO
FXSVHO(-18)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models] Yamaha
FZR/FZS (up to 2013 model)

This dramatically improves control when cornering and going over rough terrain.
It can be installed by bolting onto the original holes.

[Compatible models] SEADOO
GTR (12-19)
GTI (11-19)

Control in cornering and rough conditions will be dramatically improved.

[About installation]
Can be installed by bolt-on to the genuine hole

[Compatible models] YAMAHA
GP1800('15-)
VXR('15-)
VXS('15-)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models] SEADOO RXP-X300/260 ('12-)

This provides dramatically improved control when cornering and in rough conditions.

[Installation] Bolt-on installation possible with genuine holes

[Applicable model] SEADOO S3 hull
GTX('10-'17)
iS255
iS260

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Compatible models] YAMAHA
GP1300R (from 2005 model year)

Control in cornering and rough conditions will be dramatically improved.

[About installation] Can be installed by bolting on to the genuine hole.

[Compatible models] YAMAHA
FX140
FX160
FX HO
VX110

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

Available in 2 colors

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] YAMAHA Yamaha SJ (2021 and later models)

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
EX (2017-)
EXR

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.
Fins can be adjusted to 4 levels

[Compatible models] YAMAHA SHO ('12-)/SVHO/FZS ('14-)
2012-2018 FX CRUISER HO (1.8L)
2012-2016 FX SHO (1.8L)
2012-2016 FX CRUISER SHO (1.8L)
2012-2018 FX HO (1.8L)
2014-2018 FX CRUISER SVHO
2014-2018 FXSVHO
2014-2016 FZR
2014-2016 FZS

●PRO series sponson.
●You can change the position to suit your riding.
●Achieves agile cornering.

[Compatible models]
SEA-DOO GTX SC 185 / GTX215 / RXP 215 / RXT 215 / RXP-X 255 / RXT-X 255

●Blocks off Opus and improves handling performance.

[Compatible models] SEA DOO
RXP-X 300 (2021-2024)
RXT-X 300 (2018-2024)
GTX-L 300 (2018-2024)
WAKE PRO 230 (2018-2024)
GTX 230/170 (2021-2024)

PRO series sponsons.
This allows for agile cornering.
The grip in the corners is also very stable.

[Compatible models] SEADOO SPARK Spark

[Compatible models] SEADOO
RXT-X(2012-2017)
RXP-X(2012-2020)

face plate only

[Compatible models] SEADOO
2005 to 2011
GTX / RXT / RXP / RXT-X / RXP-X

PRO series sponsons

2003-2004 SEA-DOO GTX SUPERCHARGED 185
2005-2008 SEA-DOO GTX LIMITED 215
2005-2009 SEA-DOO GTX 155
2005-2007 SEA-DOO RXP 215
2005-2009 SEA-DOO RXT 215
2005-2008 SEA-DOO WAKE 155
2006 SEA-DOO GTI PRO 130
2006-2010 SEA-DOO GTI SE 130
2007-2010 SEA-DOO GTI SE 155
2007-2009 SEA-DOO WAKE 215
2008-2010 SEA-DOO RXP-X 255
2008-2009 SEA-DOO RXT-X 255
2009 SEA-DOO GTX LIMITED IS 255
2009 SEA-DOO RXT IS 255
2010-2017 SEA-DOO GTX 155 (IC)
2010 SEA-DOO GTX IS 215
2010-2011 SEA-DOO RXT IS 260
2010-2016 SEA-DOO GTX LTD IS 260
2010-2011 SEA-DOO RXT-X 260 (IC)
2010-2012 SEA-DOO WAKE PRO 215 (IC)
2011-2016 SEA-DOO WAKE 155 (IC)
2011-2017 SEA-DOO GTI 130 (IC)
2011-2013 SEA-DOO GTI SE 155 (IC)
2011 SEA-DOO GTX 215 (IC)
2011-2013 SEA-DOO RXT 260 (IC)
2012 SEA-DOO GTX S 155 (IC)
2012-2016 SEA-DOO GTR 215
2016 SEA-DOO GTX LIMITED 300
2017-2019 SEA-DOO GTR 230
2017-2019 SEA-DOO GTR-X 230
2017 SEA-DOO GTX LIMITED S 260

[Applicable model] KAWASAKI 1500SX-R 4 stroke

●The design has a track record of racing,
Provides significant handling improvement over stock 1500SXR sponsons.

●The backing plate is precision machined from high-strength billet aluminum.
Anodized to prevent corrosion.

●Features a bulletproof fin mounting system that includes 3 anchor points with billet inserts.
● Sponson depth and anterior/posterior position are adjustable.
●Easy installation requires no drilling.

●Applicable models KAWASAKI
ULTRA310X/310LX/310R/310SE
ULTRA300X/300LX
ULTRA260X/260LX
ULTRA250X
ULTRA LX
PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.