Collection: 純正/社外 部品：社外部品

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

[Compatibility] Stainless steel carrying can (JL15006-20/JL15006-25)

From the popular American brand VP Racing Fuel,
Convenient goods that prevent gasoline from boiling over with just one touch are now available!

VPTrigger is a patented
Equipped with push-button self-vent control flow valve
Revolutionary refueling goods.

The installation and operation method is very easy, just tilt the carrying can.
Simply press the trigger button to refuel and release the button to quickly stop refueling.

The unique design prevents fuel from spilling onto expensive vehicles, graphics, the ground, or the sea surface, and by attaching it to a stainless steel carrying can that complies with the Fire Service Act, the amount of refueling can be adjusted with a single touch.

Of course, we can minimize the gasoline spills that occur every day.
A must-have item for making pit stops in endurance races as quickly and safely as possible!

If you have this, you can use it when carrying cans.
Gasoline will not spill even if you carry it with the hose attached! !

【accessories】
・VP trigger body
・Billet adapter

●This is a lashing kit for securing a stainless steel portable container to the rear deck of a PWC.
●Comes with a high-quality EVA mat and lashing belt to prevent scratches on the hull when securing the portable can.
●The EVA mat is CNC machined to prevent the tank from slipping.
●Both the ratchet and gunwale hook sections are made of stainless steel to prevent rust.
●Vertical 20L/25L gasoline cans (JL15006) can be loaded on the rear deck.

■Kit contents: 1 gasoline can
・EVA mat × 1
・Gunnel hook × 2
・2 ratchet lashing belts

[Installation precautions]
*Approximately 300mm of space is required in front and behind the deck surface.
* Boats with R-shaped gunwales cannot be used.

●Portable can specifications ■Material: Body/stainless steel Cap/aluminum ■Size: Width 255 x Length 360 x Height 320 mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Compatible models] SEA-DOO
●300 horsepower model & 2018 and later models (*Genuine product number 420956744 equivalent product)
●260/255/230/215/185/155/130 horsepower model (-2017) (*Genuine part number 420956741 equivalent)

*Excluding GTI90/SPARK

・・・
This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.
■Accessories: 1 each of thin O-ring, thick O-ring, and small O-ring

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, due to repeated use over a long period of time, engine oil becomes dirty and deteriorates.
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

Please select your desired prefecture type.

●JCI compatible products (small ship court equipment)
●Contents: 1 set of 2 pieces ●Size: Width approx. 100 x Height approx. 80mm

[Essentials for changing engine oil! ]
●Powerful vacuum sucks up fluids.
●Suitable for suctioning oil, water, etc. in any situation and location.
●It also has a pressure change function with a hand pump, so all you need is space to move the handle up and down.
●When using the handle, pump around 10 times and then continue suction automatically.
In addition, it is equipped with an air valve as standard, so if you have a compressor,
By connecting to an air valve, suction can be performed with increased suction power, so no effort is required.
●Complete equipment perfect for pro shops.
●Vacuum effect is required, such as changing oil in cars and motorcycles, draining water from water tanks, etc.
Can be used in any situation.
-With scale that allows you to see the amount removed at a glance

[Disclaimer]
This product is imported from overseas, so a Japanese instruction manual is not included.

[Included hose size]
Small: outer diameter approx. 5.8 mm (inner diameter 4 mm) x length approx. 82 cm
Medium: Outer diameter approx. 6.7mm (inner diameter 5mm) x length approx. 82cm
Large: Approximately 9.8 mm outer diameter (8 mm inner diameter) x 98 cm length

GLOVE BOX LATCH

SEA-DOO genuine part number (OEM): 264000133 etc.

●Glove box latch for SEA-DOO

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 1510 in the third photo.

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

[Compatible models] YAMAHA
SHO / FX CRUISER SHO / FZS / FZR / VXR / HO(09~)
Displacement 1800cc or more
(*Equivalent to genuine product number 69J-13440-03)

●External oil filter

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Information] Please use part number: JL16006 for removal.

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

Great value 2 piece set sale

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

BELLOW

SEA-DOO genuine part number (OEM): 268000186 etc. IBR boots for SEA-DOO
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.
*The location used is number 50 in the third photo.

[Applicable] SEA-DOO 4-stroke pump diameter 161mm (for 300/230 horsepower)

● BRP genuine part number 267000917

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

SEA-DOO RXT/GTX 02-09)

Cheaper than genuine parts! !

●SEA-DOO RXT/GTX 02-09) Reverse cable

*Equivalent to genuine part number 268000030

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

[Compatible with] SEA-DOO pump diameter 159mm 260/255/215

●WSM stainless steel wear ring 159mm
●OEM #267000372

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.

Cheaper than genuine parts! !

●SEA-DOO end fitting

*Equivalent to genuine part number 269501717

●Easy to purchase and economical, essential for improving engine durability.

[Compatible models] KAWASAKI 800 / 750 (excluding 92-99Zxi) / 650 (86-96)
Kawasaki SC 650 1991-1995
Kawasaki SX 650 1987-1993
Kawasaki TS 650 1989-1996
Kawasaki X2 650 1986-1995
Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki SX-R 800 2003-2011

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●Compatible models: KAWASAKI
800SX-R/800X-2
SX-R 800 2003-2011
X-2 800 2005-2006

top end gasket kit
Required during engine overhaul
■Head gasket,
■Base gasket,
■Intake gasket,
■This is an exhaust gasket KIT.

[Compatible model] YAMAHA 1200ALL(65U)

Yamaha GP1200 1997-1999
Yamaha SUV1200 2000-2002
Yamaha XL1200 1999

[Compatible models]
KAWASAKI Kawasaki
550SX(91-95)/650SC(91-95)/650SX(91-93)/650TS(91-95)/650X-2(91-95)/
750SX(92-95)/750ZXi(95-97)
900STX(97-99)/900ZXi(95-97)/1100ZXi(96-99)

●Gasket kit for carburetor overhaul
●Please use it during regular carburetor overhaul.
KEIHIN CDK-2

[Note] Because the O-ring shape is different, some parts cannot be used with Kawasaki genuine 40mm.

●SEA-DOO 900 / 1503 13-21 compatible
*Equivalent to genuine part number 277001887
(Equivalent to product number 44 in the second image. [Example] '16 RXT-X300)

GTI 15032015
GTI 130 2013-2016
GTI 130 Rental 2020
GTI DTF 2016
GTI LTD 155 2013-2017
GTI P LTD 155 2018
GTI P SE 130 2018
GTI P SE 155 2018
GTI P SE 90 2018
GTI P STD 90 2018
GTI SE 2019
GTI SE 130 2013-2017
GTI SE 155 2013-2017
GTI SE HO 2017
GTI SE NA 2019
GTI STD 2019
GTI STD HO 2019
GTI STD HO 2017-2019
GTI STD Rental 2019
GTR 215 2013-2016
GTR P STD 230 2018
GTR STD 230 2017
GTR STD HO 2019
GTR X 230 2017
GTR X HO 12019
GTS 2015
GTS 130 2013-2014,2016
GTS HO ​​2017
GTS P STDR 90 2018
GTS Rental 2013
GTS STDR HO 2017
GTX 155 2013-2017
GTX LTD 215 2014-2016
DooGTX LTD 230 2017
DooGTX LTD 300 2016-2017
DooGTX LTD IS 260 2013-2017
DooGTX LTD SCIC 2014-2016
GTX SCIC 150 2013
GTX STD 155 2017
GTX Wake Pro 215 2013-2016
GTXS LTD 260 12017
GTXS STD 155 2017
RXP X 260 2013-2015
RXP X 300 2016-2017
RXP XRS 300 2017
RXT 260 2013-2016
RXT STD 260 2017
RXT STDRS 260 2017
RXT X 260 2013-2017
RXT X 300 2016-2017
RXT X AS 260 2013-2016
RXT XRS 300 2017
Spark 2Up 2015-2021
Spark 2UpHO/3UpHO 2015-2020
Spark DT/NA 2014
Spark TRIXX 2Up/3Up 2017-2021
Wake 155 2013-2016
Wake P STD 155 2019
Wake Pro 215 2013-2016
Wake Pro 230 2017
Wake STD 155 2017
Wake STD NA 2019

[Compatible models]
YAMAHA GP800R(01-02)/GP1200(00-)R/GP1300R(03-08)/800XL(00-01)/800XLT(02-03)/1200XLT(01-04)/1200XL-L(99-00 )/1200SUV(00-02)/FX SHO(09-)/FX ALL(02-03)/VX ALL(05-)

*Please use [003-522] 155mm replacement wear ring.

●YAMAHA pump housing system significantly reduces maintenance costs compared to genuine parts.
●Wearing of the case can be dealt with by replacing the wear ring.

[Compatible model] SEA-DOO pump diameter 155.5mm
[Representative model] GTX 4-TEC ('02-'03)/951 model

●WSM wear ring 155mm
●OEM #271000653

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.

PUSH BUTTON RED

SEA-DOO genuine part number (OEM): 277002327 etc.

●Stop/start button for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 190 in the second photo.

●SEA-DOO Pump Repair Kit

The genuine SEA-DOO part number (OEM) is as follows: ① 267000900 Angle bearing
② 293300086 O-ring Quantity: 2
③ 271002071 Seal
④ 293370038 Circlip
⑤ 293200089 Oil seal Quantity 2
⑥ 293300090 O-ring

For SEA-DOO 4-stroke 155mm pump (for 185/155/130 horsepower)
[Compatible] SEA-DOO pump diameter 155mm
[Representative models] GTX155('04-) / GTX SC 185 / WAKE155 / GTI155 / GTI130

●Genuine part number (OEM): 267000419 (old part number: 267000104)

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encoding security system)
*SPARK is not compatible as it does not have the above system*

●Genuine part number (OEM): 278003400 etc.

[Note]
*Programming work is required after purchase.

SEA-DOO 4 stroke temperature sensor
LIQUID SENSOR

●Genuine product number (OEM): 278002895 etc.

●SGS Tempture Sensor LIQUID SENSOR
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4 stroke
●Genuine part number (OEM): 420851754

●SGS spark plug pipe
●For 1 cylinder
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

SEA-DOO 4-stroke 1503 (excluding 2018 and later models, 300 and SPARK)
●Genuine part number (OEM): 296000307

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.