Collection: steering parts

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product name] LOCK GRIP 'LOGO'
[Size] 130 x 29mm
[Lock ring] Red
[Included] Plastic end
Based on the concept of easy grip, we have achieved high grip strength while ensuring cushioning properties.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!

*You can enjoy your favorite color coordination with optional items sold separately.
*Photo 3...This is an image of the use of the lock ring (product number: UL32003) and end cap (product number: UL32004).

[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003)
●End cap 2 pieces (product number UL32004)

UL32001BK Black
UL32001WH White
UL32001GR Green
UL32001OR Orange

[Compatible] External handlebar (bar diameter: 22.4mm)

[Product name] LOCK GRIP 'Honeycomb'
[Size] 130 x 29mm
[Lock ring] Black (color cannot be selected)
[Included] Plastic end

With the concept of easy grip, the inside of the grip features a honeycomb pattern and logo.
A stylish and high grip is achieved with a non-slip diamond pattern while ensuring cushioning properties.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!
By using the grip ring and end cap (sold separately), you can create a stylish look around the handle.
[Precautions when installing] Apply grease to the lock ring tightening bolt to prevent it from sticking, and be careful not to overtorque when tightening the bolt.

*You can enjoy your favorite color coordination with optional items sold separately.
[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003-all 6 colors)
●End cap 2 pieces (product number UL32004-all 6 colors)

UL32007RD Red
UL32007GY Gray
UL32007GR Green

Handlebar exclusively for UNLIMITED runabout models

Use it by wrapping it around the handlebar.

■Length: 23cm

It is standard equipment on the following UNLIMITED handles.
Product number:
UL31002
UL040
UL040CA
UL040CA-2
UL31001

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Lock Grip Ergo
[Size] 130 x 30mm
[Lock ring] Black
[Included] Plastic end

The ergonomic structure is designed to fit in the palm of your hand for comfort while riding. The wide design disperses localized pressure on the palm, reducing strain on the hands and arms.
The grip part is made of soft rubber, and the outer periphery is made of grooved non-slip rubber to improve grip.
This ergonomic grip has a fit that sticks to your palm and a soft grip.
The lock ring is made of aluminum, and by tightening the screw, it prevents the grip from coming off the handlebar.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!

[Precautions when installing] Apply grease to the lock ring tightening bolt to prevent it from sticking, and be careful not to overtorque when tightening the bolt.

【option】
By attaching the optional color grip ring and end cap (sold separately), you can create an even more stylish look around the handle.
●Lock ring 2 pieces (product number UL32003-all 6 colors)
●End cap 2 pieces (product number UL32004-all 6 colors)

UL32008BL Black/Blue
UL32008GR Black/Green
UL32008GY Black/Gray
UL32008RD Black/Red

UNLIMITED lock-on grip series
*ODI grip cannot be installed on other manufacturers.

[Product name] LOCK RING

[Material] Made of aluminum
[Quantity] 2 pieces 1 set

Optional lock ring for UNLIMITED lock grip.
You can dress it up by matching the color of the throttle lever and handlebar.
The lock part is made of aluminum to prevent the grip from slipping out.

UL32003SL Silver
UL32003BK Black
UL32003GR Green
UL32003OR Orange
UL32003BL Blue
UL32003RD Red

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Rock Grip Splash
[Compatible] External handlebar
[Size] 130 x 29mm
[Lock ring] Red
[Included] Plastic end

The diamond pattern prevents blisters from forming on your hands, and has sharp teardrop-like cuts that make it easy for your fingertips to get caught and prevent slipping. The lock part is made of aluminum to prevent the grip from coming off.
No adhesive required!

*You can enjoy your favorite color coordination with optional items sold separately.
[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003)
●End cap 2 pieces (product number UL32004)

UL32002BK Black
UL32002WH White

[Compatible models] KAWASAKI
STX160 series
STX series
800X-2
ULTRA series (※)
*2022 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

■Handlebar clamp: Compatible with standard handlebars (diameter 22+-0.2mm, 7/8")

An innovative steering mount kit with a built-in spring in the steering mount.
The moderate spring repulsive force absorbs shock during riding and reduces rider fatigue.

The stroke amount is a 7mm stroke that has a movable range that does not easily affect riding.
To achieve smooth movement, lubrication is possible from the grease nipple on the top of the steering mount.
The internal components are made of stainless steel, and the steering mount body is made of aluminum billet using a precision machining center.

[Information] There are optional items sold separately.
[UL061] Fat bar clamp
[UL062] Offset clamp

【please note】
2022 ULTRA 310LX/310LX-S requires processing on the upper left cover of the mounting bolt.

[Compatible] Can be installed on runabout models *Depending on the arrival time, the logo may not be displayed. note that.

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 7900mm
■Handlebar clamp area: 170mm
■Grip end position: 110mm

The wide handle allows for aggressive riding.
The handlebar is made from aluminum alloy, which is also used as an aircraft material, to make it even stronger and lighter.
Also, the wide handle allows for easy cutting.
The grip position is lower than the stock handlebar, so you can maintain a low stance and lower your line of sight, allowing you to corner in the best position.

[Disclaimer] *Depending on the time of arrival, the logo may not be present.

●Soft type
●With 3/4 flange
●Size: Total length 120mm x outer diameter 32mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.

【please note】
The color of the ring and the design and shape of the cap may vary depending on the time of arrival. Please note.

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

The billet lever set for Yamaha RiDE models offers superior control, comfort, cutting-edge style, and practicality.
Directly replace OEM plastic parts with high quality CNC billet machined throttle and brake/reverse levers.
Featuring more comfort features for a precise feel and easy installation with included instructions.

[Compatible models]
2021 and newer Yamaha GP models
2021 and newer Yamaha VX models (excluding VX-C)
2022 and newer Yamaha FX models

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

[Compatible models]
YAMAHA 2022 and later X models

Design features include billet aluminum construction for maximum strength and stiffness.
Directly replaces bulky OEM mechanisms with stronger, lighter units.
Delivering precision feel and confidence, improving reliability and comfort to push your craft to its limits.
Compatible with standard 7/8" MX bars and provides adjustable quick steer functionality.

Main features:
Billet aluminum construction provides superior strength and rigidity Compatible with all common 7/8" handlebars Includes an aluminum cover plate to surround the steering cavity Precision machined steering arm features an adjustable Features a 'quick turn' setting Cutting-edge race styling Anodized all aluminum parts to prevent corrosion Available in black, blue and red anodized

Must use aftermarket handlebars and grips.

[Compatible models]
YAMAHA 2022 and later X models

Design features include billet aluminum construction for maximum strength and stiffness.
Directly replaces bulky OEM mechanisms with stronger, lighter units.
Delivering precision feel and confidence, improving reliability and comfort to push your craft to its limits.
Compatible with standard 7/8" MX bars and provides adjustable quick steer functionality.

Main features:
Billet aluminum construction provides superior strength and rigidity Compatible with all common 7/8" handlebars Includes an aluminum cover plate to surround the steering cavity Precision machined steering arm features an adjustable Features a 'quick turn' setting Cutting-edge race styling Anodized all aluminum parts to prevent corrosion Available in black, blue and red anodized

Must use aftermarket handlebars and grips.

【Compatible models】
KAWASAKI ULTRA 310LX/310LX-S (22~)

A cover that protects the back side of the throttle lever (KSRD) when replacing the steering mount of the ULTRA series ( 22~ ).

[Disclaimer]
Specifications such as coloring and texture may change depending on arrival and shipping time.

The billet lever set for Yamaha RiDE models offers superior control, comfort, cutting-edge style, and practicality.
Directly replace OEM plastic parts with high quality CNC billet machined throttle and brake/reverse levers.
Featuring more comfort features for a precise feel and easy installation with included instructions.

[Compatible models]
2021 and newer Yamaha GP models
2021 and newer Yamaha VX models (excluding VX-C)
2022 and newer Yamaha FX models

[Compatible models] Kawasaki Kawasaki ULTRA (22-)

When replacing the genuine handlebar with an aftermarket handlebar,
This is a kit used when relocating the immobilizer unit.

■Kit contents Plate bolt spacer pattern instruction manual

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatibility] For SEA-DOO(08-09) RXP-X / RXT-X

[1] SE-027018 STD standard handlebar (Φ22.4)
[2] SE-027018F FAT fat handlebar (Φ28.6)

steering system.

●This is a steering mount system designed with an image that emphasizes the letter X.
●Compared to other companies' products, the strength of the front cowl mounting stay is increased by billet and welding.
●Also, the surface is buffed and anodized to give you a high-dimensional stylish look.

[Compatible with] SEA-DOO (04-) 4TEC

[1] SE-027016 STD standard handlebar (Φ22.4)
[2] SE-027016F FAT fat handlebar (Φ28.6)

It's a steering system
A cool design with a 4TEC image.

■Medium type
■With 3/4 flange
■Size: Total length 130mm x outer diameter 30mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

●Grip that does not require bonding and is very popular in America.
●It is a type that does not use adhesive for installation and is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

●Hard type
●No flange
●Size: Total length 130mm x outer diameter 29mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

Fine granular protrusions provide high grip strength.
A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.
【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

[Compatible models] KAWASAKI Kawasaki
ULTRA300X / ULTRA300LX / ULTRA300SE
ULTRA310LX (-'21) / ULTRA310X / ULTRA310SE

Used to relocate the cruise control button when replacing the accelerator lever.
Available in 4 colors, you can color coordinate the throttle lever and hull.

When replacing the throttle lever
●When trying to use the cruise control function at the same time...
You must replace the stock steering mount with an aftermarket steering mount and use a relocation plate.

●By using this case together
[Using the cruise control function with the original steering mount] Furthermore
[Replacing the throttle lever without losing the position tilt function] is now possible.

[Compatible models] SEA-DOO iTC/iBR equipped model
Lever billet case for electronic throttle (iTC) and I-brake (iBR) systems

[UL36006] SEA-DOO mode select system case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Applicable models] SEA-DOO iTC/iBR equipped model Lever billet case for electronic throttle (iTC) and I brake (iBR) system

[UL36005] Case for SEA-DOO mode select system

Left side: Sports mode/Eco mode VTS button case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC equipped model Lever billet case for electronic throttle (iTC) system

[UL36004] Right side: Electronic throttle (iTC) lever case

Move the iTC and iBR sensors to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iBR equipped model
Lever billet case for I-brake (iBR) system

[UL36003] Left side: I brake (iBR) lever case

Move the iBR sensor to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

[Compatible models] KAWASAKI ULTRA series / YAMAHA GP1800
■Handlebar clamp: Compatible with standard handlebar diameter 22.2mm

●KAWASAKI ULTRA310X /310R /310LX (-'21) /310X SE /300X /300LX /260X /260LX /250X /LX
●YAMAHA GP1800 / VX series ('15-)

■Material: Made of billet aluminum

This adapter allows you to replace the handlebar while using the genuine handlebar mount.
To replace the handlebar of a model that uses a V-shaped handlebar mount,
It used to be necessary to replace the steering mount, but with this product, you can now replace the handlebar!

For the ULTRA series, we use the genuine OEM mount as is, so
The steering wheel tilt function can also be used as is.

SEA-DOO
Models equipped with electronic throttle (iTC) and I-brake (IBR) systems from 2009 onwards

[There may be additional parts required depending on the compatibility details and model. Please check the product description]

[Compatibility details]
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[About required parts]
*S3 Hull...The angle adjustment range of the normal steering wheel tilt function is limited.
*T3 Hull, RXP-X260/300, 2015 and later models...Top plate [UL35100TP-2] sold separately is required.
*SPARK…Removal of stainless steel DESS post holder plate requires SPARK dedicated top plate [UL35100TP-SP] sold separately.

New design and low price!
10cm lower than the normal position, allowing riding in a low position.
An offset handlebar clamp [UL062] is installed.
Other handlebar clamps from the same company can be attached.
*Depending on the model, the hull and handle may interfere.

【Guidance】
●Recommended for use with the company's billet switch case set [UL36000] and ITC/IBR billet lever [UL33002] ●It is also possible to process and use the X series genuine switch case.
●The handlebar of the SEA-DOO model is now replaceable.

[Compatible models] Sea-Doo
SEA-DOO 2009 and later models equipped with electronic throttle (iTC) and I-brake (IBR) system
2011~ T3 Hull (RXP-X 260 IS･AS), 2016~ T3 Hull (RXP-X 300 IS･AS)
2011~ S3 Hull (RXT・RXT-X・GTX/IS・AS), 2009 S3 Hull (IS・AS Series)
2011~ GTI series (GTI130 / SE155 / WAKE155 / GTR)
2014~ SPARK

[Product Name] iTC iBR LEVER KIT iTC iBR LEVER KIT

By making the lever end part flip up, the grip on your fingertips increases and prevents your fingers from slipping out! A sophisticated and stylish lever made from machined aluminum.

By creating a drill hole in the lever part and making the lever end part flip up, the grip on the fingertips increases and prevents fingers from slipping out.
This unique trigger shape pursues racing.
■Machined aluminum

UL33002SL Silver
UL33002RD Red
UL33002YL Yellow

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

Made from polished aluminum, the length of the wire and the weight of the throttle can be adjusted.
The grip width at idling remains the same, but the pulling distance has been made longer than previous throttle levers.
By doing so, it can now be used on models with long accelerator strokes such as SEADOO Hydro.

[Disclaimer]
Specifications such as coloring and texture may change depending on arrival and shipping time.

YAMAHA genuine handlebar (external grip installed)

[Product name] UNLIMITED OEM end cap [Material] Aluminum [Quantity] 2 pieces 1 set

Used when replacing the grip with an aftermarket item on a YAHAMA boat while keeping the original handle.
Effective as a grip retainer.

UL32101BK Black
UL32101BL Blue
UL32101RD Red
UL32101SL Silver

●SEA-DOO (Can be used when using an aftermarket grip with the genuine handlebar)

*Cannot be used for RXT, GTX, WAKE, etc. after 2020

*Compatible with UNLIMITED lock grip series and grips made by other companies.

[Product name] SD bar end kit
[Material] Made of aluminum
[Quantity] 2 pieces

●When changing to an aftermarket grip with SEA-DOO, it compensates for the lack of the genuine handlebar and allows for reliable tightening. It is also necessary to prevent the grip from coming off.

UL32101SL Silver
UL32101BK Black
UL32101BL Blue
UL32101RD Red

UNLIMITED LOCK GRIP SERIES
*ODI grip cannot be installed on other manufacturers.

[Product name] End cap END CAP
[Quantity] 2 pieces 1 set
[Material] Made of aluminum

UNLIMITED Optional end cap for lock grip.
You can enjoy dressing up by matching the color of the throttle lever and handlebar.

UL32004SL Silver
UL32004RD Red
UL32004GR Green
UL32004OR Orange
UL32004BL Blue
UL32004BK Black

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Compatible] Can be installed on runabout models

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 850mm
■Handlebar clamp area: 130mm
■Grip end position: 65mm

Minimize clamping area, grip, switch case,
Handlebar with maximum throttle lever aria.
Bending tie compatible with recent models.
The shape that hangs toward the bar end creates a riding form that naturally closes the sides when cornering.

[Compatibility] Can be installed on runabout models [Type] Handle diameter 22.4mm standard [Included] Handlebar pad included (pad length: 220mm)

●Wide handlebars allow for natural and aggressive riding.

●The wide handle makes it easy to adjust (cut) the handle to your desired length.

●The racing handlebar is made from aircraft materials and coated with carbon fiber, giving it a spartan and stylish look.

●The angle and length are based on the conventional racing bar, but there is a printed scale that allows you to reliably set the mount position, making it convenient for setting.

●The straight type is the world's first innovative handlebar exclusively for watercraft, with no SWEEP handle squeezed at all. Used and recommended by top riders around the world. The feature is that when the center of gravity is low, there is no interference between the steering wheel and the flank when cornering, allowing you to maintain a more forward-leaning posture.

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*The company's adjustable handle mount
[UL35003] For [UL35003-ULD] (UL35007 head plate only)

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For the company's UL35300 shockless handle mount

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI UNLITED head plate (model number: UL35007) only
(*Product used: UL35003-ULD)

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.
UNLIMITED Handle Mount ULTRA Low Down Mount Kit (UL35003-ULD)
This is a special kit for the head plate used.
■Material: Stainless steel