Collection: fender

●Please use when mooring to a pier or quay.

●It is recommended to use 4 pieces per boat instead of 2 pieces on each side.

●Split structure so that the fender follows the hull.

●Comes with a rubber stopper and rubber coated hook to allow it to be installed in a variety of locations, and a belt cushion to prevent scratches from rubbing between the fender belt and the hull.

●Size: 10.2x31.8cm

Product name: Advanced step fender (white)
Product number: ST-123-W

Advanced step fender white (1 piece/side)

The stylish design features steps on the front and back that are convenient for maintenance, allowing you to make your presence known.

*Advanced step fender is black with white paint.
*Please let us know the trailer model when ordering.
*Cannot be installed depending on the trailer model.
Please contact us.

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

[Product specifications]
■Material: PVC
■Size:
Diameter: 140mm
Length: 510mm
Rope hole diameter: 12.7mm

■Applicable boat size guide: 10-20f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

[Product specifications]
■Material: PVC
■Size:
Diameter: 180mm
Length: 660mm
Rope hole diameter: 19.1mm

■Applicable boat size guide: 20-30f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.

● Compatible with Hull guard fender, PWC buoy, mark buoy (fender, buoy that uses 97560 nozzle)

●A hand pump for manually inflating air.

●Since the amount of air injected is small, please use it to replenish air when it leaks.

[Set contents] 3-piece set: main body, hose, and nozzle

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

[Product specifications]
■Material (float): PVC foam
■Float body (per piece)
Size: 141φ×175mm
Hole diameter: 25φ
...

■Rope
Size: 12φ×2m

[Float x 3] + [Rope]
●This is a fender that uses egg-shaped vinyl chloride foam in three rows.
●Float body material: PVC foam

CASTRO
Castro Fender was born in Spain in the early 1970s by founder Carlos Castro.
Castro is now one of the world's largest manufacturers of buoy fender floats.
Our products are sold in over 70 countries around the world and are widely praised for their outstanding quality and innovative design.

■Size: Diameter/Total length/Eye diameter
A-0HD: 200mm / 270mm / 25mm
A-1HD: 290mm / 370mm / 25mm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it extremely durable. ,
●Can also be used as a course buoy if installed upside down.
●You can easily inflate with an air compressor or air gun.

【please note】
*Air injection nozzle not included *Delivered with air removed *As this is an overseas product, specifications may change without notice.