Collection: tie down belt lashing

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
Secure to the rear of the trailer using mounting hardware.

●Material: Stainless steel (metal parts)
●Contents: 1 set of 2 pieces
●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces

【please note】
*The hook in the image is not included.
[Mounting hardware is not included. Other company's multi-hook usage example (SRX-143L, SRX-143R)]

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

●Left and right sold separately. Sold as 1 piece each.
(Please choose left or right when looking from the rear of the trailer.)

●Additional hook for fixing ●Plate required when installing retractable transom tie-down.
●A hook compatible with advanced LED combination lamps.

■Includes mounting bolts and nuts

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and protect the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-L x 2: Tie down pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces *The hook in the image is not included. (Image of use in conjunction with multi-hook made by other companies)

Stainless steel tie-down belt ratchet type automatic winding trailer

Tie-downs are essential for fixing boats, jets, etc. at the transom.

●Material: Steel (metal fittings part)
●1 set of 2 pieces
●Belt width 50mm x length 1.2m

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: Set of 2 ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer parts Trailer lashing belt Wet fabric

[Compatible models] Kawasaki ULTRA310LX/310LX-S

By using a tie-down kit,
You can easily secure large items such as cooler boxes and portable cans.

■Approximately 40kg load capacity (88lbs load capacity)

【Note】
*Fixed items such as lashings are not included.
*Please do not use this product as it is not intended for use in towing.

●By adding "stop" to "hang" on the hook part, it is possible to prevent the hook from falling when it is fixed, making it easier and more secure to tie down.

●Belt width: 25mm, Fixed side belt length: 300mm, Winding side belt length: 3,200mm

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

■It is very convenient when the tie-down belt hook cannot be hung or the belt cannot reach, such as when transporting a jet loaded on a trailer.

■You can loop it and hang it on the hook anywhere.

■Quantity: 2 pieces 1 set

■Total length: 50cm

Further durability has been added to the buckle and ratchet parts.

●Belt width 25mm x length 4.5m
- 24cm from ratchet to S hook, thickness approximately 1.6mm
*Please allow slight errors due to measurements made by our staff.

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification *The 4th image is a comparison image with the L size [red logo mark].

Tie-down belt cover pad medium trailer parts lashing belt

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

★Large size is also available to accommodate large ratchets.
*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Pat Trailer Parts Boat Trailer Lashing Belt

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

●Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.

*Dimensions of part A in the image are 60mm type.
(A type with dimension A of 20 mm (product number SRX-121-01) is also available.)

●Quantity: Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.
*Dimensions of part A in the image are 20mm type. (A type with dimension A of 60mm (product number SRX-121-02) is also available.)

[Retractable transom tie down]
■Set of 2
■Stainless steel
■Belt size: length 1000mm x width 48mm
■Size: 160 x 93 x 65mm
*With fixing stainless steel bolts

●The hull can be easily fixed and released by operating the handle grip.
●Automatic winding system stores excess belt in the main body, so there is no need for troublesome belt processing.
●Metal parts such as hooks and ratchets are made of rust-resistant stainless steel.
●The hook is PVC treated to prevent scratches on the hull.

※※※ Multi-hook is required for installation ※※※

■Set of protector on STD tie-down belt

■Used when loading a jet on a trailer and transporting it.

■Belt length 4.5m x width 25mm

■24cm from ratchet to S hook

■Made of steel

A slip and scratch prevention protector made of EVA mat.
Made of the same material as the deck mat, it is essential for preventing scratches from ratchet parts such as belts.

■Quantity: 1 set of 2 ■Material: Made of EVA mat ■Size: 100 x 230mm

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-M x 2 pieces: Tie down pad M size 2 pieces

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off from the trailer every time.

[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces

*The hook in the image is not included.
(Image of use in conjunction with multi-hook made by other companies)

Tie-down belt ratchet type automatic winding trailer

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

●Material: Steel
●Belt length: 1,455mm
●Width: 25mm
●Working load: 400kg
●Breaking load 800kg

The use of a rotating mechanism allows for free installation.
Since it is fixed to the transom, it can be towed in style without damaging the hull.
Also, since the gear part is exposed, it is easy to maintain and can be used for a long time with proper grease.

●For fixing in places with no tightening allowance or in narrow places.
●Since there is no hook, lashing around the perimeter is very convenient.

●Width 25mm x length 1,455mm

●Can be looped and lashed in areas where there is no tightening allowance.

■Belt total length: 2000mm
■Belt width: 25mm

■In addition to fixing the jet handle pole, you can also freely adjust the length with the stopper part.

■Length: 100cm

●You can add hooks to trailers and trucks that do not have side hooks and hang fixed hooks such as tie-down belts.

●Clamp width up to 45mm.

●Steel PVC coating

■Length adjustable from 61 to 91cm

●Supports the outboard motor when towing a trailer, reducing the burden on the transom.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Up to 2 items can be sent together