Collection: trailer parts

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

The belt wound inside the housing can be stretched to the desired length, hooked onto the transom handle (eye) of the boat, etc., and wound and secured with a ratchet.
Unlike regular tie-down belts, there is no need to take the time to attach and detach them from the trailer every time.
Secure it to the rear of the trailer using the mounting brackets.

●Material: Stainless steel (metal parts)
●Contents: 2 pieces in 1 set ●Belt width: 48mm x length ~900mm
Load capacity: 3000LBS (1360kg)/2 pieces

[Note]
*The hooks in the image do not come with mounting brackets (sold separately). Example of using a multi-hook from another company (SRX-143L, SRX-143R)

●Left and right sold separately. Sold as 1 piece each.
(Please choose left or right when looking from the rear of the trailer.)

●Additional hook for fixing ●Plate required when installing retractable transom tie-down.
●A hook compatible with advanced LED combination lamps.

■Includes mounting bolts and nuts

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel plated

■Pin diameter: 6.0mm

■Pin width: 17mm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-L x 2: Tie down pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces *The hook in the image is not included. (Image of use in conjunction with multi-hook made by other companies)

Stainless steel tie-down belt ratchet type automatic winding trailer

■It becomes a safety chain when the trailer comes off from the car when towing the trailer.

■Material: Steel plating

■Chain length (not including S hook): 1,170mm

■S hook length: 110mm

■Hook part thickness: 11mm

- Lamp size: 102 x 51 x 28mm

●Water resistant specifications

●Sold per unit

It has a ``water resistant'' design that can withstand water from above, such as rain and car washes.
Avoid submerging the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

ロングセラーの「UNLIMITEDタイダウンパッド」のデザインがリニューアル

ポイント

• アイコニックなカラーバリエーション
  ブラック（BK）、カーキ（KH）、グレー（GY）の3色展開。
  アウトドアにマッチするシンプルなデザインに、高級感のあるUNLTDの
  ラバーロゴパッチがアクセントを添えます。

• 新改良マジックテープ
  接着力が強化され、繰り返し使用しても毛羽立ちにくい仕様です。
  耐久性もアップし、頻度の高いご使用でも安心してお使いいただけます。

• 高品質な素材
  厚さがしっかりした5mmのネオプレン素材を採用。
  頑丈さと優れたクッション性で、大切な船体をしっかりと保護します。

商品スペック

• カラー: ブラック（BK）、カーキ（KH）、グレー（GY）
• サイズ:
  • 展開時：約22cm × 19cm
  • 巻時：約22cm × 6.5cm
    ※縫製により±5mm程度の誤差が生じる場合があります。

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.
[Example: ZERO500S: 2 Ф13 holes required on the trailer frame]

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ----------------------------

■It is very convenient when the tie-down belt hook cannot be hung or the belt cannot reach, such as when transporting a jet loaded on a trailer.

■You can loop it and hang it on the hook anywhere.

■Quantity: 2 pieces 1 set

■Total length: 50cm

●Sold in units of 1 piece.
●Round shape

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

[In 2018, the white base has been changed to a black base. ]

■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: Stainless steel hook winch strap Product number: SRX-149R Red Product number: SRX-149B Blue Product number: SRX-149Y Yellow
Product number: SRX-149K black

High quality winch strap with durable stainless steel hook

Available in 4 colors: red, blue, yellow, and black that stand out as accents.

The loop strap that comes with the hook is a SOREX special specification with a length of 40cm, which is the same as the existing winch strap and is sewn in Japan for peace of mind.

Strap width 50mm x length 6m Center pin included

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

Bow stop extension kit compatible with SOREX ZERO series.

If you feel that the center of gravity of the trailer and hull is too forward on Kawasaki's ULTRA series or STX series,
This kit allows you to lower the center of gravity of the boat to the rear.

■Compatibility: SOREX ZERO trailer ■Contents: Main unit, mounting parts (please refer to the image for details)
*This product does not include winch, strap, bow roller, etc.

◆For ZERO 500Z Avanzard◆
*Triangular reflector is not included.

[Advanced LED combination lamp limited model special specification]
・Bronze color reflector gives a sharper rear view
・Changed to a bright red light bar
・Advanced sequential turn lamp

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

●Color: 4 colors ●Width: 50mm
●Belt length: 5,000mm

Adding a multi-strap function to the hook part reduces damage to the hull!
The functionality has been improved as it can be easily fixed to PWC where hooks are difficult to pass through.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue

●This is a single trailer winch handle.

●Can be used as a repair replacement for rusted or deteriorated handles.

●Suitable for most boat trailer winches.

●Material: Stainless steel

●Size: Approx. 19cm x 0.5cm・Handle part: Approx. 11.3cm

●Handle mounting hole: approx. 9.4mm x 12.7mm

*The included nut may not be usable depending on the winch you have.

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: Set of 2 ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer parts Trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

Stylish design with steps on the front and back for convenient maintenance!

■Sales unit: 1 piece (2 pieces required when replacing left and right) Common shape for left and right ●Accessories: None

[Requests and notes when ordering]
*Please let us know the trailer model when ordering. It may not be possible to install depending on the model of trailer.
The following information is required for compatibility confirmation and product arrangement.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

★Cannot be installed (example): 2019 TWINJETSW cannot be installed

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can also be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

When attached to the bank of a trailer, it can be easily slid to load and unload jets and boats.

■Material: Polyethylene ■Total length: 13300mm
■Full width: 29mm

■Set contents Blue rail 133cm x 4 pieces

[Notes about the product]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
●Please note that small scratches occur during the manufacturing process and are not eligible for return or exchange.

■A set of trailer coupler lock key and ball mount lock key.

■The key is unique. (The key for the coupler lock and the key for the ball mount lock are different.)

[Coupler lock key]
■Helps prevent trailer couplers from falling off and being stolen.
■Material: Steel (chrome plated)
■Pin diameter: approx. 6.4mm
■Keys: 2 pieces

[Ball mount lock key]
■Helps prevent the ball mount from falling off and being stolen.
■Material: Steel
■Pin size: approx. Ф16mm x 70mm.
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX, class 3
■Keys: 2 pieces

■It becomes a safety cable when the trailer comes off from the car when towing the trailer.

■The hook has a metal fitting (stopper) to prevent it from coming off, making it a safe design.

■Specifications: Vinyl coating

■Length: 600mm (excluding hook)

■Hook part thickness: 12mm

■Wire thickness: 8mm

■Maximum load capacity: up to 2,268kg

■1 set of 2 pieces

■Trailer side 7-pin type wiring socket for lights

■Material: Aluminum die-cast

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

■Bolt size AxBxC: 80x63xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Foldable type
■Material: Steel
■Maximum load: 360kg
■Stroke: 280mm
■Tire diameter: 140mm

■Quantity: 1 piece
■For shaft Φ28

【please】
*Please let us know if you are using it for innerwear or outerwear.
*For hub seals, please prepare your vehicle inspection certificate, etc., and then contact us after measuring the actual product you have.

■Size: 75x80mm (length x width)

■Specifications: Vinyl coating
■Length: 600mm (excluding hook)
■Hook part thickness: 10-11mm
■Hook length: 110mm
■Wire thickness: 8φ

Helps prevent the trailer coupler from falling off.

■Material: Stainless steel
■Pin diameter: 6.0mm
■With strap