Collection: Rubber boats/mini boats/supplies

●Lightweight, compact and easy to handle. Equipped with the only air-cooled engine in its class, cleaning up is easy.

●Honda's unique air cooling system that does not require washing the inside of the engine.

●Lightweight and compact, top level in its class.

●Using the only automatic centrifugal clutch in its class, the boat can be maneuvered from neutral to acceleration without shifting.

●Equipped with a 1.1L fuel tank, the largest capacity in its class. Allows for comfortable cruising.

[Main specifications]
●Institution name: BF2DH
●Type: SCHJ
●Engine type: Air-cooled 4-stroke OHV single cylinder
●Total displacement: 57cm3
●Bore x straw: 45 x 36mm
●Rated output: 1.47kW (2PS)/6,000rpm
●Steering method: short tiller handle
●Starting method: manual
●Tilt method: Manual
-Total length x width x height: 412 x 285 x 956mm
●Dry weight (including propeller): 13.6kg

[Important]
*Engine oil is not included in the shipping state.
*Be sure to fill with engine oil before use.
*Use Honda genuine Ultra U general purpose (SAE10W-30) or SAE10-30 oil equivalent to SF/SG class in API classification.
*Engine oil capacity: Upper limit is 250ml, lower limit is 200ml.

This is a repair kit for PVC towing tubes and banana boats.

■Set contents: PVC (30G) fabric 20 x 20 cm and PVC adhesive

<Paste procedure>
1. Remove any dirt from the area to be repaired.
2. Cut the sticker into a circle larger than the scratch.
(※Cutting it into a square makes it easier to peel off)
3. Place the sticker over the area to be repaired and mark the size of the sticker with a permanent marker.
4. Apply adhesive to the main body.
5. Once the surface has dried slightly, attach the sticker.
6. Finally, tap the area to be pasted with your hand to remove any air bubbles and ensure it is firmly attached.

[Caution] Not suitable for repairing fabric joints or crimped sections.
In addition, the packaging may change depending on the lot of the product.

Very convenient for maintenance and storage of outboard motors.
When not in use, it can be folded and stored compactly.

●Material: Steel (black paint)
●Applicable horsepower: Up to 5 horsepower class of 4st outboard motor

●Size: width 540 x depth 640 x height 1000mm
●Outboard motor fixing plate dimensions: width 46 x height 11.5 x thickness 3.5cm
●Height from the top of the outboard motor fixing plate to the ground: Approximately 89.5cm
●Body weight: Approximately 6.0kg

【please note】
*This product requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit