Collection: body fitting

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL56009SL Silver
UL56009BK Black
UL56009GR Green
UL56009BL Blue
UL56009RD Red

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL56008SL Silver
UL56008BK Black
UL56008GR Green
UL56008BL Blue
UL56008OR Orange
UL56008RD Red

[Adaptation] KAWASAKI Kawasaki

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[KAWASAKI]
UL46009RD
UL46009SL
UL46009GR
UL46009BK

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

This is a fixed steering mount conversion kit/hood for Yamaha TR-1 Super Jet (2021~).
With this kit, you can enjoy riding like an X-2.

All you need is a handlebar and grip.

The included steering mount system uses bearings to ensure smooth steering.
The total weight of the fixed part is lighter than the genuine hood and handle pole of this steering kit.

By combining optional parts such as the highly expandable Evolution series and steering mount bearing type, it is possible to select the height and bar clamp [UL35211].

[Kit contents]
■Hood body *Note: This is a black gel coat hood.
■ Steering mount assembly (in silver billet)
■ Stainless steel bracket and holder ■ Set of mounting screws *This kit does not include decals.

*When installing a fat bar, a separately sold [Product number: UL061 Fat Bar Clamp] is required.

For ULNIMITED full billet sponsons (UL53200)

aluminum billet

Contents: 4 pieces

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

[Compatible models] YAMAHA Superjet (2021)

Made of aluminum billet

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

■Compatible with: 500/800 bilge pump

■Material: Aluminum ■Hose piercing port: Ф19mm
■Exit hole: Ф15mm
■Mounting hole: Ф26mm

A straight type that can be installed flat on the hull.

UL013SL Silver
UL013BK Black
UL013GR Green
UL013BL Blue
UL013PU Purple

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

[Compatible models] KAWASAKI ULTRA series
ULTRA310 (~'21)
ULTRA300X
ULTRA300LX
ULTRA LX ('12～)

*ULTRA250/260 is not compatible.

[Product Name] ULTRA310/300X Front Cowl FRONT COWL

■Black gel coat finish.

It is designed to be easily converted from normal food.
Since the normal inner is used as is, the normal storage box can also be used!
Compared to the normal hood (without innerwear) which weighs approximately 3.5kg, the weight can be reduced by approximately 20%.

※※This is an unpainted product, so please paint it in your favorite color before use. ※※

【Guidance】
*Made-to-order products (usually takes about 3 weeks) Please contact us for the approximate delivery date before placing your order.
*Please note that we cannot accept cancellations or returns.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.