Collection: Tools/Others

■Total length: 50cm long pick tool
■Includes: Leather pick tool cover included

Quickly picks up plastic, tree branches, aquatic plants, etc. that get caught in the impeller while driving without having to remove or remove the intake gate.

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

[Compatible models]
YAMHA 4 stroke model (FX-SHO/FZR/FZS)
For other models, please use "Q5W-MIT-001-088".

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

[Compatible models] YAMAHA
Yamaha 4-stroke FX (excluding FX-SHO/FZR/FZS)/VX
(※)Cannot be used for FX- SHO / FXR /FXS

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

[Adaptation]
YAMAHA SVHO/SHO (for YS/YV)

SOLAS impeller drive shaft holder

[Compatibility]
For YAMAHA YS/YV A stamping

Impeller live shaft holder for SOLAS

[Compatible models]
YAMAHA Yamaha FR-FZS/SHO
Drive shaft holder for SOLAS impeller YS

【Compatible models】

■Impeller wrench for SEA-DOO SOLAS SRZ-TP twin impeller

[Application] A special tool required for attaching and detaching SOLAS Twin Impeller SRZ-TP.

【Compatible models】

■SEA-DOO Impeller wrench for SOLAS SRX/SRZ

[Application] A special tool required for installing and removing the impeller.

【Compatible models】
SEA-DOO for Sea-Doo SOLAS SR/SRB

impeller wrench

[Application] A special tool required for installing and removing the impeller.

[Compatible models] YAMAHA
800GPR / 1200GPR / 1300GPR / 800XL / 1200XLT / 1200XL-L

■SOLAS Impeller YF/YG/YQ/YD (Concorde)
■155XL pump, drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 800/1200/1300GPR/1200XLT/1200XL-L/FX140/160

SOLAS impeller YF / YG / YQ YD (Concorde) compatible
Drive shaft 20mm

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

[Compatible models]
YAMAHA
YS-CD
YS-TP

■Material: Aluminum

[Adaptation]
YAMAHA
For YS-DF
For YV-CD

■Material: Aluminum

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Compatible models]
KAWASAKI Kawasaki :KH
SEA-DOO: ALL (excluding SR/SRX/SRZ)
YAMAHA Yamaha: YQ(※)

(*) YAMAHA 760RZ/760VN, XL800 is compatible with product number "SL009".

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

The small body makes it convenient for use in narrow spaces.

[Material]
■Body part: Zinc
■Bolt part: Steel
[Size] Approx. 55 x 40 x 13 (mm) ■Clamp size: 20 (φmm)
[Contents] 1 pair (2 pieces)

[Application] Used to stop hose lines.

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

[Product specifications]
■Adaptation: J-210 PWC up to 3 people
■Total length x width x height: 1350 x 709 x 275mm (rail width: 440/340mm)
■Frame: 380mm square
■Caster diameter: 100Ф

*"J-209 Maintenance Stand High Grade" is recommended for boats weighing close to 500 kg.

Lowering the rail section improves runabout maintenance work efficiency!
The rail width is adjustable and all casters have stoppers.
Made of aluminum and specially anodized, it is lightweight and will not rust.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■Adaptation: PWC up to 4 people
■Total length x width x height: 1,340 x 955 x 410mm (rail width: 580mm)
■Frame: 70mm square
■Caster diameter: 125Ф

Since it uses anodized corrosion-resistant aluminum pipe (high strength pipe with center rib), it can be used with confidence even on lightweight and sturdy 500kg class boats.
Comes with a hook and rope to prevent it from slipping off.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Product specifications]
■J-203S Single
■Total length x width x height: 1416 x 590 x 600mm (rail width: 300mm)
■Caster diameter: 100Ф

With a height of 600mm, this stand makes maintenance work on single boats easy.
The beautiful surface finish with special alumite treatment is perfect for display.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment only. (Cash on delivery not available)
●Cannot be bundled

[Applications] A highly versatile puller that can be used for pulling out steering wheels, flywheels, motorcycle crankcases, gears, etc.

[Usage range] 38-96(mm)

[Tools used] 14mm wrench (*not included)

[set content]
・1 puller body
・1 center screw
・3 center screw adapters
・3/8” (24TPI) x 1-1/2” puller bolts 3 pieces
・3/8” (16TPI) x 2” puller bolts 3 pieces
・3/8” (16TPI) x 3” puller bolts 3 pieces
・2 3/8” (16TPI) x 4-1/2” puller bolts
・2 5/16” (18TPI) x 6” puller bolts
・3 5/16” (18TPI) x 3-1/2” puller bolts
・2 5/16” (24TPI) x 3” puller bolts
・3 5/16” washers
・2 1/4” (28TPI) x 2-1/2” puller bolts
・2 1/4” washers
・M10 (P1.5) x 35mm puller bolt 3 pieces
・3 10mm washers
・M8 (P1.25) x 45mm puller bolt 3 pieces
・M8 (P1.25) x 65mm puller bolt 2 pieces
・M8 (P1.25) x 90mm puller bolt 2 pieces
・3 8mm washers

[Compatible models] YAMAHA Yamaha SHO (4 strokes)
[Application] Used to remove the engine drive shaft coupler.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] YAMAHA XLT/XL-L/800/1200/1300GPR/FX series (4 strokes)
[Application] Used to remove the engine drive shaft coupler.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → The 2007 model hull identification number (HIN number) is written on the plate affixed to the side or rear of the hull or on the ship inspection notebook ("Subject" on the inside of the back cover). Masu
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2.The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.