Collection: Winch/Strap/Winch Tower

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: Stainless steel hook winch strap Product number: SRX-149R Red Product number: SRX-149B Blue Product number: SRX-149Y Yellow
Product number: SRX-149K black

High quality winch strap with durable stainless steel hook

Available in 4 colors: red, blue, yellow, and black that stand out as accents.

The loop strap that comes with the hook is a SOREX special specification with a length of 40cm, which is the same as the existing winch strap and is sewn in Japan for peace of mind.

Strap width 50mm x length 6m Center pin included

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

●Color: 4 colors ●Width: 50mm
●Belt length: 5,000mm

Adding a multi-strap function to the hook part reduces damage to the hull!
The functionality has been improved as it can be easily fixed to PWC where hooks are difficult to pass through.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue

■It is very convenient when the tie-down belt hook cannot be hung or the belt cannot reach, such as when transporting a jet loaded on a trailer.

■You can loop it and hang it on the hook anywhere.

■Quantity: 2 pieces 1 set

■Total length: 50cm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

Tie-downs are essential for fixing boats, jets, etc. at the transom.

●Material: Steel (metal fittings part)
●1 set of 2 pieces
●Belt width 50mm x length 1.2m

■The winch and strap set is a great value. Recommended for replacing rusted or broken winches!

■Large hook winch A winch with a strap.

[Product specifications]

■Winch body: Steel chromate plating

■Load capacity: 907kg

■Belt length: 7.5m

■Belt width: 5cm

[Compatible models] Kawasaki ULTRA310LX/310LX-S

By using a tie-down kit,
You can easily secure large items such as cooler boxes and portable cans.

■Approximately 40kg load capacity (88lbs load capacity)

【Note】
*Fixed items such as lashings are not included.
*Please do not use this product as it is not intended for use in towing.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

■Material: Steel ■Accessories: Chain & electrode connector holder included [Place of use] Attached to the triangular gathering part or coupler part, mainly used for two-boat configurations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: 1500LBS winch with cover Product number: SRX-133

Bow stop extension kit compatible with SOREX ZERO series.

If you feel that the center of gravity of the trailer and hull is too forward on Kawasaki's ULTRA series or STX series,
This kit allows you to lower the center of gravity of the boat to the rear.

■Compatibility: SOREX ZERO trailer ■Contents: Main unit, mounting parts (please refer to the image for details)
*This product does not include winch, strap, bow roller, etc.

Further durability has been added to the buckle and ratchet parts.

●Belt width 25mm x length 4.5m
- 24cm from ratchet to S hook, thickness approximately 1.6mm
*Please allow slight errors due to measurements made by our staff.

■The winch and strap set is a great value. Recommended for replacing rusted or broken winches!

■Large hook winch winch with strap

[Product specifications]

■Winch: Steel chromate plated

■Load capacity: 725kg

■Belt length: 7.5m

■Belt width: 5cm

*Cannot be used for vertical movement.

●This is a single trailer winch handle.

●Can be used as a repair replacement for rusted or deteriorated handles.

●Suitable for most boat trailer winches.

●Material: Stainless steel

●Size: Approx. 19cm x 0.5cm・Handle part: Approx. 11.3cm

●Handle mounting hole: approx. 9.4mm x 12.7mm

*The included nut may not be usable depending on the winch you have.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 920kg / 2000LBS

■Handle length: 210mm

*Body/handle only.

*Winch strap is not included.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 727kg / 1600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 630kg/ 1400LBS

*Body/handle only.

*Winch strap is not included.

■Gear can be changed to 2 speeds

■Can be used in forward rotation lock, reverse rotation lock, and 3 free stages.

■The handle is thicker and easier to grip.

■Gear ratio: 5:1/12:1

■Material: Steel plating

■Maximum towing load: 1100kg / 2500LBS

■Handle length: 250mm

*Body/handle only.

*Winch strap is not included.

■With forward rotation lock

■Gear ratio: 3.1:1

■Material: Steel plating

■Maximum towing load: 270kg/ 600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

For PWC/black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

for boat MB

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[set content]
Bow tower, winch stand, bow roller, end cap, bolt, nut

For boat black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

For boats and galvanizers

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

●Roller size: Total length 78xФ74
●Shaft diameter: 16.0mm

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*The above information is necessary for arranging the product. *
*Please note that submission → conformity confirmation → product arrangement will be required*

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can also be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed to SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed due to the special bow stop.

■Stainless steel■Included: Mounting bolts (size: Φ10x47x100mm) and 2 sets of nuts

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap ■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-60S small hook 6.0m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

■Set of protector on STD tie-down belt

■Used when loading a jet on a trailer and transporting it.

■Belt length 4.5m x width 25mm

■24cm from ratchet to S hook

■Made of steel

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.

■Application: Winch strap
■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-60S large hook 6.0m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

●For adjustable tower (75x45) ●When moving the trailer, use the carry handle for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when in a low position!

■Material: Steel ■Includes: Reinforcement stay, chain wire & electrode connector holder included.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

●For adjustable tower (75x45)
●When moving the trailer, the carry handle allows for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when sitting in a low position!

■Material: Stainless steel
■Includes: Reinforcement stay, chain wire & electrode connector holder included.

●When moving a trailer, it eliminates the inconvenience of not having a place to hold it or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Stainless steel

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

For W-MAX

●Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Steel
■Can be installed in two directions: front and back

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

■Material: Stainless steel
■Includes: Chain & electrode connector holder included
[Place of use] Attached to the triangular gathering part or coupler part, mainly used for 2-boat loading.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

■Material: Steel
■Includes: Chain & electrode connector holder included
[Place of use] Attached to the triangular gathering part or coupler part, mainly used for 2-boat loading.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

■Material: Stainless steel ■Attachments: Chain & electrode connector holder included [Usage location] Attached to the triangular gathering part or coupler part, mainly used for 2-boat installations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

■Size: 78x170mm (length x width)

■Size: 75x80mm (length x width)

■Material: Stainless steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●Color: Black

●Width: 50mm Belt length: 5,000mm

●By adding a multi-strap function to the hook part, it reduces damage to the hull and can be easily fixed to PWCs where hooks are difficult to pass through, improving functionality.

[The photo shows stainless steel]

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.