Collection: Handle related

Handlebar exclusively for UNLIMITED runabout models

Use it by wrapping it around the handlebar.

■Length: 23cm

It is standard equipment on the following UNLIMITED handles.
Product number:
UL31002
UL040
UL040CA
UL040CA-2
UL31001

[Compatible] Can be installed on runabout models *Depending on the arrival time, the logo may not be displayed. note that.

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 7900mm
■Handlebar clamp area: 170mm
■Grip end position: 110mm

The wide handle allows for aggressive riding.
The handlebar is made from aluminum alloy, which is also used as an aircraft material, to make it even stronger and lighter.
Also, the wide handle allows for easy cutting.
The grip position is lower than the stock handlebar, so you can maintain a low stance and lower your line of sight, allowing you to corner in the best position.

[Disclaimer] *Depending on the time of arrival, the logo may not be present.

[Compatible models] SEA-DOO iTC/iBR equipped model
Lever billet case for electronic throttle (iTC) and I-brake (iBR) systems

[UL36006] SEA-DOO mode select system case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Applicable models] SEA-DOO iTC/iBR equipped model Lever billet case for electronic throttle (iTC) and I brake (iBR) system

[UL36005] Case for SEA-DOO mode select system

Left side: Sports mode/Eco mode VTS button case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC equipped model Lever billet case for electronic throttle (iTC) system

[UL36004] Right side: Electronic throttle (iTC) lever case

Move the iTC and iBR sensors to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iBR equipped model
Lever billet case for I-brake (iBR) system

[UL36003] Left side: I brake (iBR) lever case

Move the iBR sensor to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

[Compatible] Can be installed on runabout models

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 850mm
■Handlebar clamp area: 130mm
■Grip end position: 65mm

Minimize clamping area, grip, switch case,
Handlebar with maximum throttle lever aria.
Bending tie compatible with recent models.
The shape that hangs toward the bar end creates a riding form that naturally closes the sides when cornering.

[Compatibility] Can be installed on runabout models [Type] Handle diameter 22.4mm standard [Included] Handlebar pad included (pad length: 220mm)

●Wide handlebars allow for natural and aggressive riding.

●The wide handle makes it easy to adjust (cut) the handle to your desired length.

●The racing handlebar is made from aircraft materials and coated with carbon fiber, giving it a spartan and stylish look.

●The angle and length are based on the conventional racing bar, but there is a printed scale that allows you to reliably set the mount position, making it convenient for setting.

●The straight type is the world's first innovative handlebar exclusively for watercraft, with no SWEEP handle squeezed at all. Used and recommended by top riders around the world. The feature is that when the center of gravity is low, there is no interference between the steering wheel and the flank when cornering, allowing you to maintain a more forward-leaning posture.

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

Clamp for fat bar (28.6mm diameter) and standard (22.4mm diameter) handlebar

[Size] Length 30mm
[Quantity] 4 pieces 1 set
[Material] Made of aluminum

Perfect fit for UNLIMITED fat bar clamp (model number: UL061).
Compatible with fat bar clamps other than UNLIMITED.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Adaptation]
KAWASAKI ULTRA series & stand-up model
ULTRA250X / ULTRA260X / 260LX
ULTRA300X/300LX
ULTRA310X / 310SE / 310LX (-'21)
ULTRA LX
ULTRA130 ULTRA150
YAMAHA stand up model SJ FX1
*Cannot be used on YAMAHA runabout models.

■Material: Aluminum ■Type: Handle diameter: 22.4mm Standard ■Color: Black

Handlebar compatible with KAWASAKI genuine V-type clamp type.
Based on the ULTRA250/260 genuine handlebar, it has been extended 25mm wider on the left and right, making it the same length as the 300/310 series.
The lever and grip have plenty of room to achieve easy cornering.
Moreover, it is a revolutionary handlebar that allows you to use the genuine handlebar cover!
For stand-up users, the wing-swept handlebars keep the center of gravity low and enable hard cornering.

【correspondence】
KAWASAKI genuine mount (cannot be used on some models*)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Made of aluminum

A clamp for attaching the handlebar. The clamp is inclined at 60.5°.
Tilt the handlebar mounting position 60.5 degrees and offset it 25mm upward and 15mm front and back.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
Can be installed on runabout models
Compatible with 28.6mm handle clamp

【type】
Handle diameter: Clamp mounting part 28.6mm,
Grip/lever mounting part 22.4mm

●The clamp part is thick and flexible, making it a wide handle with excellent flexibility and strength.
●Wide handle has sufficient rigidity and is coated with carbon Kevlar.
★Also available in silver without carbon coating (UL049).
*A separate fat bar clamp (UL061 recommended) is required for installation.

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.