Collection: water line

KAWASAKI
SEADOO

●Quantity: 1 piece
●Hose spigot: 17mm
●Material: Made of billet aluminum
●Color/4 colors available: Silver, Red, Black, Green

The hose outlet is a one-touch joint connector type.
Can be used in conjunction with general one-touch connectors.

【Guidance】
Flushing adapter for engine flushing (water washing)
Can be used in conjunction with UNLIMITED billet flush fitting [UL53006].

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL56009SL Silver
UL56009BK Black
UL56009GR Green
UL56009BL Blue
UL56009RD Red

●O-ring for Salt Away mixer (SA-M)

■Material: Rust-resistant stainless steel

[Product specifications]
■Size/Quantity
JL50-120140: 120-140mm / 2 pieces
JL50-140160: 140-160mm / 2 pieces
JL50-1625: 16-25mm / 10 pieces
JL50-4060: 40-60mm / 10 pieces
JL50-6080: 60-80mm / 5 pieces
JL50-816: 8~16mm / 10 pieces

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

This is a genuine YAMAHA hose adapter.

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[Applicable] Hose outer diameter Φ15.8mm

[Application] To prevent the hose from coming off [Material] Clamp: All stainless steel, Body: Aluminum

We will make your hose look stylish.

JL80052BL Blue
JL80052RD Red
JL80052BK Black
JL80052PU Purple
JL80052SL Silver

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

■Material: Brass
JL003-6: 1/8×1/8 pulse 90° (threaded part 10mm: P0.9: outer diameter 7mm)

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHT08: Outer diameter 8× 8× 8mm/Inner diameter 5× 5× 5mm
NHT10: Outer diameter 10 x 10 x 10 mm / Inner diameter 7 x 7 x 7 mm
NHT12: Outer diameter 12×12×12mm/Inner diameter 10×10×10mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRT1008: Outer diameter 8×10×10mm/Inner diameter 5×7×7mm
NHRT1210: Outer diameter 10 x 12 x 12 mm / Inner diameter 7 x 8 x 8 mm
NHRT1412: Outer diameter 12 x 14 x 14 mm / Inner diameter 8 x 10 x 10 mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRE0806: Outer diameter 6 x 8mm/Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm/Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm/Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14 mm / Inner diameter 8 x 10 mm

[Nekopos shipping products]
*Credit card payment or advance transfer only *Date and time cannot be specified *For cash on delivery, shipping fee is 800 yen/Hokkaido/Okinawa 1,500 yen (excluding tax)
*Other products ordered at the same time are not eligible for free shipping.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRC0806: Outer diameter 6×8mm/Inner diameter 4×5mm
NHRC1008: Outer diameter 8×10mm/Inner diameter 5×7mm
NHRC1210: Outer diameter 10 x 12 mm / Inner diameter 7 x 8 mm
NHRC1412: Outer diameter 12 x 14mm/Inner diameter 8 x 10mm

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

T type
It is made of aluminum and has a plated finish, giving a stylish look to the water area.
The pipe body is also very compact.

■Number: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: different diameter (outer diameter 9.5mm/6.3mm, inner diameter 7.7mm/5mm)
3/8 x 3/8 x 3/8: Same diameter (outer diameter 9.5 mm, inner diameter 7.7 mm)

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL56008SL Silver
UL56008BK Black
UL56008GR Green
UL56008BL Blue
UL56008OR Orange
UL56008RD Red

■Compatible with: 500/800 bilge pump

■Material: Aluminum ■Hose piercing port: Ф19mm
■Exit hole: Ф15mm
■Mounting hole: Ф26mm

A straight type that can be installed flat on the hull.

UL013SL Silver
UL013BK Black
UL013GR Green
UL013BL Blue
UL013PU Purple

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL009SL Silver
UL009BK Black
UL009GR Green
UL009BL Blue
UL009OR Orange
UL009RD Red

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×6×6mm
Inner diameter 4×4×4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter: 6x6x6mm
Inner diameter: 4x4x4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×8×8mm
Inner diameter 4×5×5mm

Motoine Racing Straight Thread 1/4: Outer diameter 1/2

Special product for big lines

1/8 (thread) outer diameter 1/4" pulse

■Size: Outer diameter 15mm, inner diameter 7mm

Takenoko elbow socket for waterline one-touch coupler

■Material: T bolt, nylon nut all made of stainless steel

[Product specifications]
■Tightening range/clamp width/quantity

JL52-635714: 63.5~71.4mm / 19.0mm / 1 piece
JL52-826905: 82.6~90.5mm / 19.0mm / 1 piece
JL52-11431222: 114.3~122.2mm / 19.0mm / 2 pieces
JL52-15241651: 152.4~165.1mm / 19.0mm / 1 piece

Definitely recommended for models with a supercharger.
Traditional hose clamps will collapse if you tighten them too much, and fall out if you don't tighten them too much...
There was such a problem, but the tightening torque can now be managed.

With heavy duty high torque clamp,
Boasts torque performance more than three times that of normal worm gear clamps.
It is mainly used in exhaust and intake areas where vibration is likely to occur.
Tighten the T-bolt with a lock nut, so you don't have to worry about it coming loose.
It also has a structure that tightens the hose evenly, so you can grip the hose firmly.

The bolts and nuts are also made of rust-resistant SUS.
The nut uses a stainless steel nylon nut that is hard to loosen.
Adopts a ROLLED-EDGE design (R processing on both ends of the band makes it difficult for the hose to get wedged).

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

This hose has a special coating applied to its surface.

[Product specifications]
■For water (*no oil allowed)
■Size: Inner diameter/thickness/length
JL40SHL19RD: 19mm /4mm /1m
JL41SHL13RD: 13mm /4mm /1m
JL40SHL8RD: 8mm/4mm/1m

■Maximum pressure resistance for regular use 5kg/cm
■Regular heat-resistant temperature ~180℃

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

[Applicable] Hose inner diameter 16 to 18φ
[Size] Inner diameter 14mm Threaded part outer diameter 26mm

The models below can be easily connected to a water hose with a hose adapter.
SEADOO
●Models equipped with 951 engine (RX, XP, GTX, etc.)
●GTX4-TEC ~RXT

*This is the same product as the conventional GES0616 gray.