Collection: Various cleats

Material: SCS14 (equivalent to SUS316)

Size: L=100 B=16 P=30 H=24 Hole diameter 5mm

Weight: 120g

●It is a strong and stable eye plate because it is firmly fixed at 4 points.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 50 x Width 40 x Height 29mm

●It is a strong and stable eye plate because it is firmly fixed at 4 points.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Length 41 x Width 36 x Height 22mm

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

●An eye plate with two-point fixation suitable for installation in places with limited installation space.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 76 x Width 22 x Height 25mm

■Material: Stainless steel (SUS316)
■Size
Total length 124 x stop hole ~ stop hole 54 x height 28 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 152 x stop hole ~ stop hole 57 x height 31mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 73 x height 38 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 84 x height 51 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 308 x stop hole ~ stop hole 122 x height 68 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel

■Size: A total length 304 x B stop hole ~ stop hole 100 x C height 70 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 254 x B stop hole ~ stop hole 93 x C height 68 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 203 x B stop hole ~ stop hole 71 x C height 53 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 152 x B stop hole ~ stop hole 75 x C height 45 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 126 x B stop hole ~ stop hole 54 x C height 39 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 210 x stop hole ~ stop hole 53 x height 40mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

●A very convenient fixture that allows you to easily secure the rope with one hand.

●You can easily fix the rope by simply passing the rope through it alternately without tying it.

●It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

●Once fixed, the rope will not come off even if strong tension is applied.

●When removing it, you can easily remove it by removing the ropes passed through it alternately.

●Can be used with ropes up to 12mm in diameter.

●Body dimensions: 82mmx40mm
●Made of stainless steel

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 155x length 24x height 37x rope opening width 31x mounting hole distance 123mm

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to the left and right to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 123x length 20x height 26x rope opening width 14x mounting hole distance 85mm

[Product specifications]
■Quantity: 2 pieces
■Material: Nylon
■Body size: L88 x W43 x H22mm
■Compatible with: Ropes up to 10mm diameter
■Mounting hole size: 5mm

This is a very convenient fixture that allows you to easily secure ropes with one hand.
You can easily fix the rope by simply passing the rope through it alternately without tying it.
It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

Once secured, the rope will not come off even if strong tension is applied.
When removing it, you can easily remove it by removing the ropes passed through it alternately.

[About the product]
This product cannot be specified as the color may vary depending on the arrival time. Please note.

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 52 x Width 52 x Height 32 x Wire diameter 8 x Ring inner diameter 40mm

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 42 x Width 42 x Height 25 x Wire diameter 6 x Ring inner diameter 35mm