Collection: hull fitting

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Weather resistance that resists deformation, discoloration, deterioration, etc.

●Capacity: 4.2 gallons (16L)

●Roto mold cooler box with excellent rigidity and durability

●High cold retention performance with high quality insulation foam

●Equipped with seawater LinQ hardware as standard

- Enhances the whistle from the supercharger at idle, creating a nice hiss when you lightly crack the throttle and a supersonic charger noise when you back off the throttle at full boost.

- Can be installed in 5 minutes and includes a block-off cap for the air box and a low-profile hose clamp for attaching the vent hose.
・Instructions are also included

*The last few pictures are just to show how it will fit into the vent, the real vent is not included.

[Compatibility] RXT-X300(18-) / GTX170/155(18-) / WAKE Pro 230(18-)

●High quality chemically synthesized breathable mesh case for permanent installation. storage
●Convenient for storing and organizing small items.
●Combination with FRONT BIN ORGANIZER (295100732) further improves convenience.
●2018 - Standard equipment on GTX Limited300 model.

[Accessories] Mounting screws

[Compatible models]
SEA-DOO
RXT-X300 (2018~)
GTR230 (2020)

●No drilling or other processing is required as it is bolt-on.

●A spring-retractable reboarding step that enhances playability and is convenient when reboarding from the water.

【適合機種】
SEA-DOO
 RXT-X300 (2018~)
 GTX-LTD 300 (2018~)
 WAKE PRO 230
 GTX 230 / 170 / 155 (2018〜)
 GTR230 (2020~)

●ボルトオンで穴あけなど加工は不要です。
●SEA-DOO純正品 水上オートバイ用ガソリン携行タンクです

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

[Adaptation] KAWASAKI Kawasaki

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[KAWASAKI]
UL46009RD
UL46009SL
UL46009GR
UL46009BK

[Compatible models] Kawasaki ULTRA310LX/310LX-S

By using a tie-down kit,
You can easily secure large items such as cooler boxes and portable cans.

■Approximately 40kg load capacity (88lbs load capacity)

【Note】
*Fixed items such as lashings are not included.
*Please do not use this product as it is not intended for use in towing.

【適合】2022年以降のYAMAHA ヤマハ FXモデル（純正スピーカー搭載無しモデル）

・RIVA ウェットサウンド オーディオシステム YAMAHA FX (22-)を取り付ける際必要なハーネスやスイッチセット
・純正オーディオが搭載されていない2022年以降のFXモデルにRIVA/Wet Sounds FXオーディオシステム（RY11170-AS）を使用する際、必要な配線ハーネスや純正オーディオコントロールパッド、詳細な取り付け説明書が含まれています。

【おことわり】
※純正マイクアクセサリ(F5G-U827A-00-00)は付属しておりません。
※RIVA/Wet Sounds FXオーディオシステム（RY11170-AS）は別売りです。

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

【適合】2022年以降のYAMAHA ヤマハ FXモデル
2022以降のFXモデル（純正スピーカー付き）: プラグインのみで取付可能
2022以降のFXモデル（純正スピーカー無し）: オーディオアップグレードインストールキット(F5G-U81AC-V0-00)併用にて取付可能

純正の音質から更に良質な音質を追求する人にむけて、世界クラスの高音と中音、低音性能を発揮できるよう設計されています。
接続はプラグインや少量の加工のみで、Yamahaのスピーカーポッドに迅速に取り付けられ、簡単にYAMAHAと接続が可能です。

最高級の音質：8インチのマリングレードコアキシャルスピーカーと、1インチのドームツイーターが驚くべきフルレンジの音質を提供します。

オープンエアの海洋環境で強力でクリーンな音を実現できるように設計されており、かつ塩水に対応し、腐食およびUV耐性材料で設計されています。

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

One of each of the four carefully selected designs is packaged in an original EVA case.

■Kit contents 85mm/120mm/145mm/170mm total 4 pieces

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

[Adaptation]
A4025 KAWASAKI all models
A8025 YAMAHA
A2025 Universal
A4026 KAWASAKI 1200STX-R/800SXR 3 bolts

【remarks】
Those who only want duckbill rubber
→It is sold with product number: A2019.

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

[Adaptation]
A4025 KAWASAKI all models
A8025 YAMAHA
A2025 Universal
A4026 KAWASAKI 1200STX-R/800SXR 3 bolts

【remarks】
Those who only want duckbill rubber
→It is sold with product number: A2019.

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

[Adaptation]
A4025 KAWASAKI all models
A8025 YAMAHA
A2025 Universal
A4026 KAWASAKI 1200STX-R/800SXR 3 bolts

【remarks】
Those who only want duckbill rubber
→It is sold with product number: A2019.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")
■Water and light resistance

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

[Compatible models]
STX160 series
KAWASAKI ULTRA300/310 series, ULTRA LX ('12~)
ULTRA300X/ULTRA300LX
ULTRA LX('12～)
ULTRA310X / ULTRA310R / ULTRA310LX (-'21) / ULTRA310SE

*Cannot be used with ULTRA250/260.

[Material] Stainless steel polished

Luxurious stainless steel buff mirror finish!
By replacing it, you are sure to improve your visual appearance from the cheap genuine hook!

【accessories】
M8x30 cap bolt x 1
Spring washer x 1

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Compatible] SEA-DOO X series sponson (S3 hull / GTI hull after 2011)

[Quantity] 10 pieces
[Material] Stainless steel
[Size] 3mm

Oval washer used for SEA-DOO X series sponsons.
Reinforces the genuine sponsons and is also used as an accent part of the sponsons.

[Compatible models] KAWASAKI 15F(-19)/12F(05-07)

Used when the mirror is removed.

●1 set left and right ●Material: Stainless steel ●Thickness: 1mm
●Accessories: Screws x 6

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

Kawasaki 800SX-R

Compared to genuine products, they are lighter, stronger, and cheaper.
When worn, it creates a streamlined and lacy impression.

[Material] FRP
[Quantity] 2 pieces 1 set
[Installation] Bolt-on

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

●Genuine parts (OEM) part number: 292002022

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

●Genuine part number (OEM): 269501984 (old part number: 267000917)

●SGS end fitting●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

[Compatible models]
YAMAHA FZR FZS

●Mirroless camera for a stylish and lacy look.

・This is a pulley for ULTRA made from lightweight aluminum billet.
-This 108mm pulley is race spec and requires use with 98 octane fuel (Australia) or 93 octane (USA).
- Comes with a new idler to reduce belt slack.
・You can expect a significant increase in boost compared to the stock 109mm pulley.

[Compatible models]
Kawasaki ULTRA 300/310

[Applicable models] KAWASAKI 4-stroke ALL
STX-12F /STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp kit LED STOP LUMP KIT

[Kit contents]
-LED stop lamp unit x 1,
●Flexible LED lamp x 1,
●Mounting screws x 2

First PWC! This is a brake stop lamp kit exclusively for the KAWASAKI ULTRA series.
It reads the engine speed and turns off when the accelerator is on, and the LED lamp lights up when the accelerator is off.
Since it is always on while idling, you can notify people around you of your boat's presence even from a distance.
The stop lamp included in the kit uses high-brightness LED and boasts high visibility.
The flexible light lens body can be installed anywhere, making it ideal for PWCs with many curved surfaces.
It is also waterproof and durable.

This allows the following boat to slow down when touring etc.
It can be notified quickly and can be expected to be effective in preventing rear-end collisions.

[About installation]
Since it is a coupler on coupler, no special wiring processing is required.
(Lamp and unit connection processing/LED flex lamp installation only)
Attach with double-sided tape on the back of the lamp body.

【Product details】
Unit dimensions: 70×40×35mm
Cord length: Unit power line 300mm
Rotation signal line 1,400mm
Lamp connection wire 2,000mm
Power consumption: 12V 4A
Light dimensions: 110×30×10mm
Cord length: 800m

KAWASAKI 4-stroke ALL
STX-12F
STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp LED STOP LUMP

[Product contents]
●Lamp body
●Connection terminal
●Mounting screw

【Product details】
Light dimensions: 110×30×10mm
Screw hole: 6.5mm
Cord length: 800m

A highly water resistant and durable LED lamp with a flexible lens body.
The compact body allows installation anywhere, and it is very easy to install on curved surfaces using strong adhesive tape.
By lighting up the LED lamp, when touring, etc., you can quickly notify following boats of a slowdown, and can be expected to be effective in preventing rear-end collisions.
You can also notify people around you of your boat's presence from a distance.
Adopts high-brightness LED and boasts high visibility.
A flexible light lens body that can be installed anywhere is ideal for PWC.

[Regarding installation] Please install using the double-sided tape on the back of the lamp body.

[Information] If you are looking for a lamp unit, please use [Product number: JL23011].

●Caulking thickness: 12.7~15.9mm
●Flange diameter: 15.9mm
●Prepared hole: Ф4.9~5.0mm
[Quantity] 15 pieces

Race bumper splash guard installation is very convenient.

Can be installed by bolt-on without modification. (Limited to hulls with drain bolt)
Do not leave the boat in the water if it is moored for a long time, as water may flow back into the boat.

【please note】
This product is made of rubber only.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 55mm
■Maximum thickness when inserting flange: 31mm
■Total length: 65mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal Straight. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 39mm
■Maximum thickness when inserting flange: 23mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 49mm
■Maximum thickness when inserting flange: 35mm
■Total length: 83mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal Straight. Hoses etc. are not included.