Collection: engine parts

KAWASAKI
SEADOO

●Quantity: 1 piece
●Hose spigot: 17mm
●Material: Made of billet aluminum
●Color/4 colors available: Silver, Red, Black, Green

The hose outlet is a one-touch joint connector type.
Can be used in conjunction with general one-touch connectors.

【Guidance】
Flushing adapter for engine flushing (water washing)
Can be used in conjunction with UNLIMITED billet flush fitting [UL53006].

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

- Enhances the whistle from the supercharger at idle, creating a nice hiss when you lightly crack the throttle and a supersonic charger noise when you back off the throttle at full boost.

- Can be installed in 5 minutes and includes a block-off cap for the air box and a low-profile hose clamp for attaching the vent hose.
・Instructions are also included

*The last few pictures are just to show how it will fit into the vent, the real vent is not included.

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL56009SL Silver
UL56009BK Black
UL56009GR Green
UL56009BL Blue
UL56009RD Red

[Compatible with] YAMAHA Yamaha
760/800/1100/1200/1800 (*700 is not possible)

●The hose spigot is a one-touch joint connector type, so it can be used in conjunction with general-purpose one-touch connectors.

●When flushing the engine using salt remove liquid, it can be used in conjunction with the mixer to connect the hull and mixer.

●Made of aluminum billet

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

BELLOW

SEA-DOO genuine part number (OEM): 268000186 etc. IBR boots for SEA-DOO
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.
*The location used is number 50 in the third photo.

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

[Compatible models] YAMAHA Marine Jet 760/1100/1200/1300/4 stroke (700 not available)

The hose outlet is a one-touch joint connector type.
General-purpose one-touch connectors can be used.

When flushing the engine using salt remove fluid,
When connecting the hull and mixer, use this product and wash with water.

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

●UL14101: Inner diameter Ф60 x total length 70mm
●UL14102: Inner diameter Ф70 x total length 70mm

This is an exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Compatible models] YAMAHA
GP1800
VXR (2011~)
VXS (2011~)

Exhaust air can flow better and performance will improve.

[Compatible models] SEA-DOO
GTR230(-2019)
GTR-X 230(-2019)
*2020 model GTR230 is model number: RS16121.

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

This is a genuine YAMAHA hose adapter.

●Easy to purchase and economical, essential for improving engine durability.

[Compatible models] KAWASAKI 800 / 750 (excluding 92-99Zxi) / 650 (86-96)
Kawasaki SC 650 1991-1995
Kawasaki SX 650 1987-1993
Kawasaki TS 650 1989-1996
Kawasaki X2 650 1986-1995
Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki SX-R 800 2003-2011

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] SEA-DOO
RXP-X300 (2021 model)

By increasing the amount of air intake and sending a large amount of air to the engine,
Improved low and medium speed acceleration and increased top speed.

[Compatible models] SEA-DOO
RXP-X300 (2021 model)

By increasing the amount of air intake and sending a large amount of air to the engine,
Improved low and medium speed acceleration and increased top speed.

[Compatible models] SEA-DOO
RXT-X 300('18-'21)
GTX LIMITED 300('18-'21)
WAKE PRO 230('18-'21)
GTX230('21)

By avoiding the resonator after the water box and exhausting to the rear,
Improve engine performance.

[Compatible models] YAMAHA
FXSVHO (19-)
FX HO (19-)

Bypassing the resonator improves exhaust air flow and improves performance.

[Compatible models] YAMAHA
FXSVHO (19-)
FX HO (19-)

Bypassing the resonator improves exhaust air flow and improves performance.

[Compatible models] YAMAHA
FXSVHO (19-)
FX HO (19-)

Bypassing the resonator improves exhaust air flow and improves performance.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models]
RXT/GTX/Wake Pro/FishPro Trophy/Explorer Pro (ST3) models from 2023 onwards

Required if installing a RIVA Free Flow Exhaust Kit, RIVA Rear Exhaust Kit, or RIVA Dual Rear Exhaust Kit.

LADDER SEA-DOO ORCA

SEA-DOO genuine part number (OEM): 295100869 etc.

●Reboarding ladder for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 1080a in the third photo.

LATCH ASS Y

SEA-DOO genuine part number (OEM): 269700116 etc.

●Latch assembly for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 40 in the second photo.

PUSH BUTTON RED

SEA-DOO genuine part number (OEM): 277002327 etc.

●Stop/start button for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 190 in the second photo.

This is a part included with SEA-DOO genuine part number (OEM): 295501245 (reverse gate).
Genuine products are repair parts that are not sold separately.

●Reverse gear slide for SEA-DOO ( made of aluminum )
- It is an inexpensive aftermarket repair part with performance equivalent to that of genuine parts.

*The location of use is shown in the third photo.

OIL SEAL

Performance equivalent to SEA-DOO genuine part number (OEM): 93200089 etc.

SEAL

Performance equivalent to SEA-DOO genuine part number (OEM): 271002071 etc.

●Seal set for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The locations used are #1130 and #1110 in the third photo.

CYLINDER HEAD GASKET

SEA-DOO genuine part number (OEM): 420950772 etc.

●Cylinder head gasket for SEA-DOO 1630 for ACE

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is No. 1 in the second photo.

CAMSHAFT POSITION SENSOR ASSY

SEA-DOO genuine part number (OEM): 420664046 etc.

●Camshaft position sensor assembly for SEA-DOO

● This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 28 in the 4th photo.

[Compatible models] SEA-DOO
RXT-X 300('20-)
GTX LIMITED 300('20-)
WAKE PRO 230('20-)
GTX230('20-)

● Pro Series waterboxes increase horsepower and performance by reducing exhaust restriction and backpressure. Developed on the flow bench, our waterbox features a radial exhaust tube and end cap for optimal exhaust flow. Innovative short design allows supercharger servicing without removing the exhaust system. High-strength aluminum construction and precision welding can withstand backfires and overheating. Powder coated to prevent corrosion. Comes with detailed English installation instructions

Key Features Modified craft delivers up to 10hp output.
Beaded tube flange securely secures the coupler.
Radial exhaust tube and end cap.
Powder coating to prevent corrosion.
Fits all 2020 and newer models with a 1630 engine.

[Compatible models] SEA-DOO
RXT-X 300 (2020-)
GTX-LTD 300 (2020-)

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Compatible models] SEA-DOO
RXT-X 300('18-'21)
GTX LIMITED 300('18-'21)
WAKE PRO 230('18-'21)
GTX230('21)

By avoiding the resonator after the water box and exhausting to the rear,
Improve engine performance.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Material: Brass
JL003-6: 1/8×1/8 pulse 90° (threaded part 10mm: P0.9: outer diameter 7mm)

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

[Adaptation] MIUKNI Needle Screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

[Adaptation] KEIHIN needle screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

[Applicable models] For KAWASAKI 4 strokes

[1] UL19310 ULTRA310/300 only
[2] UL19311 for KAWASAKI 4 stroke *ULTRA310/300 cannot be used
*When installing on models other than NEW SX-R,
Please purchase the intake manifold gasket [genuine part number: 11061-0813] separately.

Have you ever thought that it is difficult to replace the oil filter in the original mounting position?
This product is an aluminum machined oil block that eliminates the confusion when changing oil filters.
By changing the installation direction 90 degrees, you can easily access the oil filter.