Collection: Trailer hitch members/supplies

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

Trailer slope rail, compatible with rail width 350 mm (rail center to center)

By installing a trailer slope rail, the JET can be raised and lowered smoothly, and the tail lamp, hose, etc. are not submerged in water, which prevents damage to the trailer and makes it last longer.
When not in use, it can be stored between the trailer and the PWC body.
To install, simply attach the rail guide (included) to the trailer body.

●By installing a trailer slope rail, you can smoothly raise and lower the boat, and the tail light, axle, etc., will not be submerged in water, preventing damage to the trailer and extending its life.
●Made of durable steel (iron galvanized) and 50 x 50 square pipe, so you don't have to worry about pulling it up with a winch.
(Please have 2 to 3 people support you when pulling it up. If you force it up using only the winch, it may cause damage to the winch.)
●When not in use, it can be easily stored between the trailer and the PWC body.
(Please note that depending on the boat or trailer, it may not be possible to store it, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle.
●For processing on the trailer side, simply attach the rail guide to the rear frame of the trailer using U bolts. (There is an installation confirmation at the end of the page)
*Please note that if the frame on the trailer side to be installed is low, the rear end of the slope rail will be close to the ground, which is dangerous.

Q. Is it possible for the "Rail Guide Section" to fit between the trailer's bank rails and be attached to the rear end frame?
The rail guide part size is 420 mm in total horizontal length.
The U bolt size for installation is 112 mm effective width and 76 mm depth.
Especially if the R shape is quite deep on the rear end frame, the U bolt may not fit.
In that case, it is possible if you prepare a larger U-bolt etc. separately.
*If installed on a frame with a tight radius, the bottom of the boat may hit the rail guide.
In that case, raise the bank rail and adjust. We recommend that you check the size of the rail guide parts using a dummy in advance.
*If there is a license plate etc. on the mounting part, it is necessary to move the plate etc. (Other than public roads)
*Depending on the compatibility of the boat and trailer, it may not be possible to store the rail.
The space for the rail to pass through after installation requires a gap of approximately 85 mm in height and 71 mm in width.

[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment (bank transfer) only. (Cash on delivery not available)
●Cannot be bundled

■It is an LED prism side marker for the trailer.

■Overwhelmingly brighter than conventional LED vehicle width lights.

■Made of LED to reduce power consumption. Easy to install. Stud mount.

■Quantity: 1 piece

■White color 12V

■Size: 52 x 71 x 22mm

■Same shape as SOREX

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 46mm
*Please note that there may be individual differences in size.

Steel neck 50mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there are individual differences in size, so please use this as a guide.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there may be size errors due to individual differences.

Used as a tail light for PWC/boat trailers, etc.
Three LED lamps for stop, tail/blinker, and back.

●1 piece (for one side)
*Common shape for left and right, 2 pieces required when replacing one unit ●Waterproof specification ●Size: Width 200 x Height 70 x Thickness 50 mm
●12V compatible

The wiring socket can be installed at any position on the towed vehicle.

Made by SOREX

●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible

*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Can be used as a tail light for PWC, boat trailers, etc.

■Three LED lamps for stop, tail/blinker, and back.

■12V compatible

■Size: Width 265 x Height 90 x Depth 30mm

■Bolt length: 13mm. Line length: 300mm

■Accessories: Instruction manual

■Left and right common shape (1 set of 2)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Can be used as a tail light for PWC, boat trailers, etc.

■Three LED lamps for stop, tail/blinker, and back.

■12V compatible

■Size: Width 265 x Height 90 x Depth 30mm

■Bolt length: 13mm. Line length: 300mm

■Accessories: Instruction manual

■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Class II (32x32) lock pin for ball mount

■As it is made of stainless steel, it is a rust-resistant item.

■Size: Ф12.7mmx65mm

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Lock pin for ball mount

■Made of steel plating

■TIGHT JAPAN, SUNTREX, SOREX, class 3 compatible

■Size: Ф16x75mm

Popular ZERO 500B trailer!

Standard specification of long-selling standard steel frame zinc steel steel + black (white) painted model.

Adopts Bridgestone wheels and tires!
*The tire brand SEIBERLING is manufactured by Bridgestone.

Main specifications/SPECIFICATIONS

One PWC boat weighing up to 500kg (up to 3 people)

Small vehicle/initial 2-year inspection, subsequent 1-year inspection

【standard equipment】
Bow stop kit / trailer jack / advanced LED tail lamp / steel bank / 15 inch aluminum wheel 185/55R15 tire / step fender

[Optional parts that can be installed]
Front storage, coupler handle, carry handle, shock absorber, movable license plate, spare tire kit, slope rail, anchor holder, multi-spare tire bracket, etc.

*This product will be delivered at the store.
*Payment will be in cash or bank transfer.
*For details, please contact us by phone (059-365-1010).

[Reason for outlet sale]
●Due to the nature of the product, there may be some rattling. (See photo)
●This is a new product that can be used without any problems, but please refrain from purchasing if you are concerned about the appearance.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
*We cannot answer inquiries about product specifications even if you only refer to the information listed.

[Product Specifications]
■Material: Steel ■Compatible with: American Class 3, Mount lock pin diameter: 16mm
■Square type Width: 50mm Square type ■Maximum traction force: 1575-2000kg
Hitch ball shaft diameter: 25mm
■Drop: 2 inches■Size: Please refer to image number 4.
(Please note that there may be individual differences, so please use this as a guide only.)

■7-pin type wiring socket for lights on the towing vehicle side

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■Trailer side 7-pin type wiring socket for lights

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■A set of trailer coupler lock key and ball mount lock key.

■The key is unique. (The key for the coupler lock and the key for the ball mount lock are different.)

[Coupler lock key]
■Helps prevent trailer couplers from falling off and being stolen.
■Material: Steel (chrome plated)
■Pin diameter: approx. 6.4mm
■Keys: 2 pieces

[Ball mount lock key]
■Helps prevent the ball mount from falling off and being stolen.
■Material: Steel
■Pin size: approx. Ф16mm x 70mm.
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX, class 3
■Keys: 2 pieces

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■As it is made of stainless steel, it is a rust-resistant item.

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

2” hitch ball pin included. For 6 tons.

■Material: ALL made of stainless steel.

●Dimensions: Mounting surface dimensions: Width 112x Height 75mm
Mounting bolt pitch: Width 85x Height 45mm
Mounting bolt hole diameter 12.6mm

2” hitch ball and pin included. For 1.5ton.
■Material: Made of steel.

■Dimensions: Mounting surface dimensions: Width 112x Height 75mm
Mounting bolt pitch: Width 85x Height 45mm
Mounting bolt hole diameter 12.6mm

■6-core electrical wiring set
■Please use it for wiring hitch members, etc.

【set content】
6-pole wiring 2m x 1
Single line 2m x 1
Interrupt terminal x 6

■6-core electrical wiring
■Please use it for trailer wiring, etc.
■Type: 6 poles
■Total length: 10m

●Compatible with: Ball mount class 2, class 3
●Contents: Head body, 2 replaceable bars (1 each with pin sizes Ф13mm x 65mm and Ф16mm x 65mm)
●Rubber cover cap specification.
●Made of steel plating

Master Lock 2866DAT

■5/8” axis
■Compatibility: Class III

Things you want to store somewhere like car keys and valuables at the beach.
That's where this Receiver Lock Key Safe comes in!
・・・・・・
Valuables such as keys and cards can be stored in a sturdy box.
The lock is a method of selecting 4 numbers.
Indispensable for beaches and other active lifestyles.
・・・・・・
Master Lock 1467DAT

■It becomes a safety cable when the trailer comes off from the car when towing the trailer.

■The hook has a metal fitting (stopper) to prevent it from coming off, making it a safe design.

■Specifications: Vinyl coating

■Length: 600mm (excluding hook)

■Hook part thickness: 12mm

■Wire thickness: 8mm

■Maximum load capacity: up to 2,268kg

■1 set of 2 pieces

The long-awaited NEW trailer! [ADEL REVO]

ADEL STEEL BODY
ADEL Series 2023 renewal

Make your trailer look stylish
15-inch aluminum wheels with fin design are standard equipment.

Frame material Steel: Zinc + powder coating Total length x Width x Height mm 4,005 x 1,690 x 850 mm
Vehicle weight 190kg
Loading application PWC1 boat maximum loading capacity 500kg
Tire/wheel size 195/45R15 7J ET+35
Trailer standard small 8 number

Small vehicle/initial 2-year inspection, subsequent 1-year inspection

【standard equipment】
15-inch aluminum wheels, stopper jack, tail lamp, hand brake, bending axle

*This product will be delivered at the store.
*Payment will be in cash or bank transfer.
*For details, please contact us by phone (059-365-1010).

■7-pin type wiring socket for lights on the towing vehicle side

■Material: Aluminum die-cast

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■Trailer side 7-pin type wiring socket for lights

■Material: Aluminum die-cast

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

This is a kit that upgrades your current Max trailer (LED tail lamp specification vehicle) to be compatible with Rays Platinum tail lamps.

●Lamp: Platinum black tail lamp
●Bumper cover: [Black] kit.

【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.

[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2

This is a kit to upgrade your current Max trailer (vehicle with LED tail lamps) to be compatible with Rays tail lamps.

●Lamp: Rays tail lamp
●Bumper cover: [Mirror] kit.

【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.

[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2

This is a kit to upgrade your current Max trailer (vehicle with LED tail lamps) to be compatible with Rays tail lamps.

・Lamp: Rays tail lamp
・Bumper cover: [Black] kit.

【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.

[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2

-Size: 125 x 238 x 50mm (length x width x thickness)
●24V compatible
●Sold as one unit per side (common shape for left and right)

The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
Set includes raise lamp, smoothing cover, bumper base, and number bracket.
"RAYS Tail Lamp Kit" is also available. Product number 1216-61, 1216-62, 1216-63

■Size: 125 x 238 x 50mm (length x width x thickness)
■24V compatible
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
This is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
There is also a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63, 1216-64

Please note that we are currently accepting reservations as this item will be restocked around the end of October 2022.

-Size: 120 x 120 x thickness 30mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

back lamp
Size: Height 105 x Width 30 x Thickness 30mm

[Material] Steel

●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)

●Color: Black
●Material: Steel
*Please purchase U-bolts for installation separately.

●For premium package
●Compatible with 75mmx45mm frame
●Material: Stainless steel
*Please purchase the mounting bolt [Part number 0901-00U bolt 75x45 1 piece] separately.

【please note】
For regular cars, welding is required.

[Change from Viper color to black]

●For premium package
●Material: Steel
*Please purchase U-bolts for installation separately.

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■This stay is for attaching the 7-pole connector of the hitch member.

■Material: Steel

■Plate thickness: 1.2mm
*Plate only (screws etc. are not included)

■Size details are listed in the image

It lights up in conjunction with the small light, improving the visibility of following vehicles.

●Sold in units of 1 piece.
●Size: 1 side 160mm

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.