Collection: Rubber boat/mini boat

This is a repair kit for PVC fabric tow tubes and banana boats.
■Set includes: PVC (30G) fabric 20x20cm and PVC adhesive

＜Application Instructions＞
1. Clean the area to be repaired.
2. Cut the patch into a round shape, larger than the damaged area.
(*Cutting it into a square may make it peel off easily)
3. Place the patch over the damaged area and mark its size with an oil-based marker.
4. Apply adhesive to the main body.
5. Once the surface is slightly dry, apply the patch.
6. Finally, tap the applied area with your hand to remove air and ensure a firm bond, then you are done.

【Note】Not suitable for repairing fabric seams or pressure-bonded areas.
Also, the package may change depending on the incoming lot.

■Advance Plus / Special Set
Honda's BF2 series outboard motors, previously manufactured overseas (BF2DH), are now produced in domestic factories as the "BF2DK3."

[Set Contents] Boat + 5 Items
★3m Inflatable Boat (SV-IBA300)
・HONDA 2hp Outboard Motor (BF2DK3-SCHJ)
・HONDA Engine Oil 1L (08238-99951)
・Outboard Motor Stand (JP-HR001)
・5L Plastic Fuel Can (37565)
・High-Pressure Pump (27790)

■Model without preliminary inspection
■An inflatable boat that does not require a license or boat inspection when equipped with a 2hp outboard motor.
■The transom is 50mm higher than standard, allowing for greater speed with the same horsepower.
■Includes one bench mat to decorate the aluminum bench.
*The color of the bucket in the product image is for illustrative purposes only, and color selection is not available.

[Boat Specifications]
■Material: PVC
■Capacity: 4 people
■Load Capacity: 500kg
■Overall Length x Overall Width x Tube Diameter: 300 x 150 x 42cm
■Inner Length: 215cm
■Inner Width: 73cm
■Total Weight: 34kg
■Bottom Type: High-Pressure Air Floor
■Max Horsepower: 10HP
■1-Year Warranty

[Standard Boat Accessories] 7-Piece Set
Aluminum Oars x 2 (one pair),
Carry Case,
Foot Pump,
Aluminum Benches (seat boards) x 2,
Bench Mat x 1,
SAVIVE Original Bucket,
Repair Kit

[Note on Outboard Motor Stand]
*The outboard motor stand requires assembly.
*The plate color of the transom holder may vary depending on the time of arrival. Thank you for your understanding.

[Delivery]
Shipping costs for deliveries to Okinawa Prefecture will be estimated separately each time.

■Advance Plus / Entry Set
Honda's BF2 series outboards, previously manufactured overseas (BF2DH), are now produced in domestic factories and reintroduced as "BF2DK3".

【Set Contents】Boat + 3 items
★3m Inflatable Boat (SV-IBA300)
・HONDA 2hp Outboard Motor (BF2DK3-SCHJ)
・HONDA Engine Oil 1L (08238-99951)
・Outboard Motor Stand (JP-HR001)

■Model without preliminary inspection
■An inflatable boat that does not require a license or boat inspection when equipped with a 2hp outboard motor.
■The transom is 50mm higher than standard, allowing for greater speed with the same horsepower.
■Comes with one bench mat to decorate the aluminum bench.
※The color of the bucket in the product image is for illustrative purposes only, and you cannot specify the color.

【Boat Specifications】
■Material: PVC
■Capacity: 4 people
■Load Capacity: 500kg
■Overall Length x Overall Width x Tube Diameter: 300 x 150 x 42cm
■Inner Length: 215cm
■Inner Width: 73cm
■Total Weight: 34kg
■Bottom Type: High-pressure air floor
■Max Horsepower: 10HP
■1-year warranty included

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

【Notes on Outboard Motor Stand】
※The outboard motor stand requires assembly.
※The plate color of the transom holder may vary depending on the time of arrival. Thank you for your understanding. 

【Delivery】
Shipping costs for delivery to Okinawa Prefecture will be quoted separately.

■ No preliminary inspection model
■ An inflatable boat that does not require a license or boat inspection if equipped with a 2-horsepower outboard motor.
■ The transom is 50mm higher than usual, allowing for greater speed with the same horsepower.
■ Includes one bench mat that can be used to decorate the aluminum bench.
* The color of the bucket in the product image is for illustrative purposes only and cannot be specified.

【Boat Specifications】
■ Material: PVC
■ Capacity: 4 people
■ Load capacity: 500kg
■ Overall length x Overall width x Tube diameter: 300 x 150 x 42cm
■ Internal length: 215cm
■ Internal width: 73cm
■ Total weight: 34kg
■ Bottom type: High-pressure air floor
■ Maximum horsepower: 10HP
■ Number of air chambers: 3
■ 1-year warranty

【Standard Accessories】7-piece set
Aluminum oars x 2 (one pair),
Carry case,
Foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit