Collection: Fire extinguisher/fire bucket

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-80
●Total weight: approx. 1.7kg
●Drug amount: 0.8kg
●Protection volume: 4 cubic meters
- Total height: approx. 265 mm, total width: approx. 97 mm, depth: approx. 102 mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 4 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4299
●Validity period: 6 years

*Includes recycling fee.

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-150
●Total weight: approx. 4kg
●Drug amount: 1.5kg
●Protection volume: 8 cubic meters
- Overall height: approx. 475mm, overall width: approx. 110mm, depth: approx. 107mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 6 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport model No. 4142
●Validity period: 6 years

【please note】
*Recycling sticker is not attached.

●It is a fire extinguishing bucket that can be folded compactly as it is made of cloth.

●Required during ship inspection.

●It can quickly draw water in an emergency and can be stored compactly, so it does not take up much space.

●JCI standard compliant product No. 17

【 body size 】
■Diameter: Approximately 230mm
■Height: Approx. 265mm

With 3m polyethylene rope

●A manual powder fire extinguisher for small vessels. Be sure to be equipped in case of a fire inside the ship.
●Equipped with a highly visible yellow ring-type safety plug.
Even if you hold the lever, you can easily release it and start extinguishing the fire immediately.

- Comes with a "good mark" that comes off as soon as you squeeze the lever when in use.
Fire extinguishers that have the "Good Mark" and horn "seal" removed are used and should be refilled immediately.
●Easy to use! It is extremely effective against all kinds of fires.

【Product Specifications】
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
■Model: CSP-3X
■Standard: Ministry of Land, Infrastructure, Transport and Tourism certified product
■Type approval number No. 4762
■Total weight: 2.2kg
■Height 380mm x Width 205mm x Depth 89mm
■Drug amount 1.0kg
■Applicable fires Ordinary, oil, and electrical fires
■Radiation time (20℃) 12 seconds
■Radiation distance (20℃) 3~5m
■Operating temperature range -20℃～+40℃
■Anti-rust/corrosion treatment Red/synthetic resin paint baking coating
■Hose 300mm
■Pressure test pressure value 1.2MPa

*Includes recycling fee.