Collection: hitch ball/ball cover

Made of PU (polyurethane) material, it is soft to the touch.
Protects from accidents such as shin guards.
hitch ball cover

■Material: PU material
■Correspondence:
Ball size 1-7/8 inch / 2 inch common

Hitch ball cover ■ Suitable for ball sizes 1-7/8 inch / 2 inch

Red Yellow Blue Black

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

It can be used by simply attaching it to the hitch ball.
The visual impact is also outstanding! !

This is a ball cover that is sure to stand out due to its large size.
*Please note that this may interfere with opening and closing the rear gate on some models of vehicles such as minivans.

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 46mm
*Please note that there may be individual differences in size.

Steel neck 50mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there are individual differences in size, so please use this as a guide.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there may be size errors due to individual differences.

The chrome plated finish is very clean and shiny.
hitch ball cover

■Material: Plastic
■Compatible ball size: 50mm / 2 inches common

●This is a special bag to store when the ball mount is removed.
●Does not make the interior of the car dirty, and you do not have to worry about where to put it.
●Cushion material is sandwiched between the fabrics.

[Disclaimer]
*The ball mount and hitch ball in the image are not included.

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm

■Material: Stainless steel (including washer and nut)
■Load capacity: 3500LBS (approx. 1587kg)
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

■Material: Steel
■Ball size: 50mm
■Shaft diameter: 19mm
■Maximum towing weight: 1350kg
■Total length: Approximately 110mm
■Shaft length: approx. 40mm
■Below the neck: approx. 70mm
*Please note that there are individual differences in size.