Collection: Electrical components

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2018 or later) / SPARK(※)
*'18 -'20 RXP-X / '18-20: Not compatible with all GTI, GTR / '16-'17 SD models.
*Please use 30 for 4-stroke models up to 2015.

【compatibility】
■Yuasa:
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB, YB16BCX,
GT16L-BS, GT16BS, CTX19-BS CTX19L-BS , GYZ20H, GYZ20L, GYZ20HL,YTX20L-BS,YB16CL-B
■DEKA: ETX16, ETX16L, ETX20, ETX20L
■ODYSSEY: PC535, PC625

【Product Specifications】
MBTX20U
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 310 A
■Capacity (10HR) 21 Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2
SEA-DOO 4 stroke (16-) SPARK Spark

■Ready-to-use battery
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

■Maintenance-free battery, no need to replenish fluid.
■Size: Width 175 x Height 88 x Height 155mm
■Voltage: 12V ■10 hour rate capacity: 18Ah ■Charging current: 1.8A
■Weight: 6.1KG ■Charged type
■Country of origin: China

[Features]
●Excellent self-discharge performance, long life, and startability
By making the electrolyte gel-like, we were able to improve the basic performance that is important for batteries.
It is a battery with high recovery ability and little natural discharge that occurs when left unused.
●It will not leak even if it falls sideways!
Since it is a sealed gel battery, there is no need to worry about fluid leaking even if it is placed on its side.
●Maintenance free
Since the product is sealed from the time of purchase, there is no need to inject/replenish battery fluid, so there is no need for hassle.
However, be careful about the charging current. "

*Initial charging time 1-2 hours
*Charging is required during low temperatures in winter or when the engine is insufficient to start because it has been manufactured for a long time.

ON-OFF-ON 3-way rotary switch.
Two electrical components can be operated separately.
It can be used regardless of manufacturer model.
Their high quality and reliability are highly evaluated overseas.
■Produced in Japan

■Completely waterproof
■Cord length: 25cm
■Specifications: 12V 5A

[About installation] Hole drilling (Ф13.5mm) is required on the mounting part.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

●Machined aluminum
●Cord length: 3m

It can be installed anywhere within reach from the handle grip.
When used in conjunction with UNLIMITED light tension lever (product number: UL001, UL039, UL33001), ON/OFF operation can be performed while operating the throttle.

[Disclaimer] Please note that the color of the switch may vary depending on the shipping date.

UL015SL Silver
UL015BK Black
UL015GR Green
UL015BL Blue

●A freely bendable bellows hose that connects the bilge pump and the Suruhal.

●Lightweight corrugated hose that does not collapse even when bent when handling.

●Can be easily cut with a cutter.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 100cm
■Hose diameter: 19.0mm

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 500GPH (31.5 liters/min)

●Power supply: DC12V/3.0A

●Compatible with inner diameter 3/4" (19mm) hose

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 1100GPH (69.3 liters/min)

●Power supply: DC12V/5.0A

●Compatible with 1-1/8" (28.5mm) inner diameter hose

[Applicable models] SEA-DOO T3, S3, GTI hull
*For RULE bilge pump only

[Accessories] 4 rivets

[01689] 500 [97033] 800 [01608] 1100 This is a stay when installing the bilge pump.
A bilge pump can be installed.
Bilge pump holder [12-1116] can be installed.

[Compatible models] YAMAHA 700SJ ('96~)
*For RULE bilge pump only

[Accessories] 8 rivets

[01689]:500[97033]:800[01608]1100 Stay when installing bilge pump.
Two bilge pumps can be installed.
Bilge pump holder [12-1116] can be installed in 45 degree increments.

●YAMAHA genuine parts

●Waterproof battery switch set for MJ FX, VX, EX series

●Set contents: Parts necessary for installation such as battery switch body, power cable, screws, etc.

【 specification 】
Rated voltage: DC12V Rated current: Maximum 60A

●A waterproof battery switch set that allows you to easily turn on/off the battery power of your marine jet.

●Eliminates the hassle of removing the cable from the battery terminal when the marine jet is not in use.

●In addition to the switch, all the parts necessary for installation such as power cables and screws are included.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2016 or later) / SPARK(※)
*Please use 30 for 4-stroke models up to 2015.

[Compatibility] ■Yuasa
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB

【Product Specifications】
MHTX20
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 550A
■Capacity (10HR): 15Ah

Next-generation battery that follows the benefits of lithium-ion AGM batteries
Embedded PCB board inside, overcharge protection,
Over-discharge protection, cell balance, and temperature adjustment implemented in the battery itself

●Outstanding cranking power
●Excellent life cycle
●Cranking amperage that is not affected by the weather
●Uses quad terminal
*Since the main use is racing, please use it in an environment/model that can withstand high current.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

ON-OFF-ON 3-way rotary switch.
Two electrical components can be operated separately.
It can be used regardless of manufacturer model.
High quality and reliability are highly evaluated overseas.
■Produced in Japan

■Completely waterproof
■Cord length: 3m
■Specifications: 12V 5A

[About installation] Hole drilling (Ф13.5mm) is required on the mounting part.

●Size
External dimensions: L420 x W230 x H290
Inner dimensions: L340 x W190 x H225

●Can be used for M24MF/M27MF class battery sizes.

[Product specifications]
■Power supply: DC12V 55W 5.5Am 100,000 candela
Cigar lighter/battery type
■Body size (approximate size): width 194 x depth 189 x height 200mm
■Pedestal size (approximate size): width 178 x depth 197 x height 38mm
■Cable length:
●Main cable: Approximately 320cm
●Cigar lighter: Approximately 20cm
●Battery cable: Approximately 20cm

Operates 370 degrees left and right and 70 degrees up and down with a wireless remote control.

*Remote control battery: 23A/L1028 12V alkaline batteries x 2 (separately required).

■■■■■ Points ■■■■■

1. Easy remote control operation as there is no control cable and it is wireless! Remote control possible! !

2. Power comes from a cigarette light type plug and battery cable!

3. Can be installed on a flat surface with one touch using a suction cup (lever operation)!

4. Low price!

●Draining water from boats without power sources, such as canoes and rubber boats,
It can also be used to drain water from pools and cages.

●A cordless pump that can be used with seawater or fresh water and uses batteries.

●Since it uses batteries (3 AA batteries), no wiring is required.

●Maximum discharge rate 12.6L/min
●Pumping height: 100cm
● Can be used continuously for about 5 hours (when using alkaline batteries)
●Dimensions: Height approx. 16.2x Diameter approx. 13.3cm
●Weight: Approximately 900g
●Hose length: 1m

[Product specifications]
■Type: Twin
■Material: Stainless steel
■Current: 6A
■Voltage: 12V
■Output: 109dB
■Basic frequency: H490±20/L440±20HZ
■Size: 210×83×55mm

●This is a horn for ships.
●A compact type made of rust-resistant stainless steel material.
●Since it can be installed anywhere, it is ideal for boats with limited space.
●Since it is a twin type with high and low notes, it produces a more spacious tone compared to a single type.

[Product specifications]
■Type: Single
■Current: 3A
■Voltage: 12V
■Output: 106dB
■Basic frequency: 440±20
■Size: 93×83×55mm

●This is a horn for ships.
●A compact type made of rust-resistant stainless steel material.
●Since it can be installed anywhere, it is ideal for boats with limited space.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 55mm
■Maximum thickness when inserting flange: 31mm
■Total length: 65mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal Straight. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 39mm
■Maximum thickness when inserting flange: 23mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 49mm
■Maximum thickness when inserting flange: 35mm
■Total length: 83mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal Straight. Hoses etc. are not included.

[Product specifications]
■Material: Polyethylene
■Total length: approx. 60cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

[Product specifications]
■Material: Polyethylene
■Total length: approx. 60cm
■Hose diameter: 19.0mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

A bracket for navigation lights made of rust-resistant 304 stainless steel.

■Adaptation: Navigation lights made by Koito Manufacturing Co., Ltd.
■Material: Stainless steel (SUS316 lost wax casting, SUS304)
■Mounting surface dimensions: width 107 x height 23/62 degree slope
■Electrolytic polishing finish

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

A bracket for navigation lights made of rust-resistant 304 stainless steel.

■Adaptation: Bracket for Ibuki Kogyo's navigation light "NAUTILIGHT NAVI"
■Material: Stainless steel (SUS 304)
■Mounting surface dimensions: Width 110 x Height 30 x Depth 90mm
■Electrolytic polishing finish

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-24
■Current consumption: 24V/2.5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-12
■Current consumption: 12V/5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 33mm
■Total length: 76mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 32mm
■Total length: 84mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 61mm
■Maximum thickness when inserting flange: 43mm
■Effective length of hose insertion part: 37mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30cm.

【please note】
*Suruharu in the photo is not included.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 19mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

【please note】
*Suruharu in the photo is not included.

●A navigation light mast made of rust-resistant stainless steel.

●The base part can be easily collapsed by loosening the knob, making it convenient for storing or passing under bridges.

-Pedestal dimensions: 57mmX95mm

- Total height: 450mm

●Pipe used: diameter 25φ stainless steel pipe

*The main body and navigation light installation screws are not included.

A stainless steel bracket for fixing navigation lights to pipes, etc.
Made of 316 stainless steel material that is resistant to rust and corrosion.

■Mounting part diameter: 90mm
■For 25mm diameter pipe
■Material: Stainless steel (SUS316/lost wax casting)

Navigation light mast made by Koito Seisakusho Co., Ltd.
■NO.55221, NO.95973…Open deck mast
■NO.95973…Japanese ship mast
This is the same as the standard equipment above.

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

[Product specifications]
■Maximum capacity: 300Amp
■Flange diameter: 58.5mm
■With waterproof cap
*Detailed size is shown in the photo

●A simple toggle switch type battery switch.
●Can be used to supply and cut off battery power.
●The red switch lever can be removed.

●This is a spare horn for mini jet horn (product number: 60445).

●It's safe to have one as a spare in case you lose or damage the horn part.

Spare cartridge for mini jet horn (product number: 60445).
■Cartridge capacity: 200ml
■Cartridge diameter: approx. 53mm
■Cartridge part overall height: approx. 135mm
■Products not subject to fluorocarbon gas regulations

【please note】
This product does not include a horn.

●This is an air horn that makes a loud sound of about 108 decibels just by pressing it.

-A set of 1 bugle part and 2 cartridges. We also sell cartridges only (product number: 60446, ¥1,785), so they can be used repeatedly.

●Cartridge capacity: 200ml/1 bottle

●Intermittent pronunciation time: Approximately 20 minutes
*Intermittent sounding time is the total time it takes for the cartridge to empty after the sound is played several times. Please use this as a guideline as it will vary depending on usage conditions such as external temperature.

*The continuous sounding time is approximately 1/4 of the intermittent sounding time. This is because the temperature inside the cartridge decreases due to sound production, and once the cartridge returns to room temperature, it can be used again.

●The continuous sound time is approximately 1/4 of the intermittent sound time. This is because the temperature inside the cartridge decreases when the cartridge is sounded, and when the cartridge returns to room temperature, it can be used again.

●Products not subject to fluorocarbon gas regulations

●Sound pressure: Approximately 108 decibels

●Basic frequency: 500Hz(+-)30

●Cartridge diameter: approx. 53mm

-Cartridge part overall height: approx. 135mm

●Horn diameter: approx. 60mm

-Horn part total length: approx. 150mm

A navigation light mast made of rust-resistant stainless steel.
The base part can be folded down by loosening the knob, making it convenient for storing or passing under bridges.

[Product specifications]
■Type: Open deck mast ■Material: Stainless steel ■Pedestal dimensions: 57mmX95mm
■Overall height: 1400mm
■Pipe: Diameter 25φ

【please note】
*The main body and navigation light mounting screws are not included.

[Product information]
●To prevent scratches and damage, you cannot specify "combined packaging" with other products.
●Since this product is shipped directly from the manufacturer, you cannot specify ``Cash on Delivery'' or ``Combined packaging (combined packaging) with other products.''

[Product specifications]
■Set of 1 each of plus (red) and minus (blue)
■Can be used up to 800 amperes.

[Applicable] The tip of the terminal (the thinnest part of the terminal)
Suitable for φ17.4mm positive type and φ15.8mm negative type.
■Can also be installed on types with bolts attached to the battery terminal.
■For D terminal
*Not available for positive type φ12.7mm and negative type φ11.1mm

A connector that can be connected to and removed from the battery terminal with a single touch.
Lift up the blue or red cap to loosen the terminal.
You can easily remove the wires from the battery. Attaching is the reverse operation.

[Product specifications]
●Voltage: 12V
●Current: 3.4A
-External dimensions: 74 x 64 x height 111mm (dimensions in image)
●Drainage volume 50 liters/min
●Compatible with hose diameter 19.0mm
[Adaptation] Ideal for PWC (personal watercraft) and small boats

●Since it is a completely waterproof submersible pump, it is a convenient product for circulating and draining water while on board or during maintenance.
●When wiring, insert a 7.5A fuse (*) on the + cord side.
(*Fuse is not included with this product and must be purchased separately)

[Product specifications]
●Voltage: 12V
●Current: 1.6A
-External dimensions: 74 x 64 x height 99mm (dimensions in image)
●Displacement volume 31 liters/min
●Compatible with hose diameter 19.0mm
[Adaptation] Ideal for PWC (personal watercraft) and small boats

●Since it is a completely waterproof submersible pump, it is a convenient product for circulating and draining water while on board or during maintenance.
●When wiring, insert a 4A fuse (*) on the + cord side.
(*Fuse is not included with this product and must be purchased separately)

●Super bright diffused light perfect for deck lights on large ships

●This is a square type LED light that uses five 10W LEDs.

●The perfect amount of light to illuminate the decks of large pleasure boats and recreational fishing boats.

●It has IP67 waterproof performance, making it ideal for marine use.

-Size: Width 145 x Height 97 x Depth 78mm

●Weight: 1450g

●Mounting bolt size: M10

●Wiring cord length: 520mm

●Light intensity: 5000lm

●Color temperature: 6000K

●Input voltage: DC10-30V

●Power consumption: 50W

●LED chip: CREE

●Waterproof performance: IP67

●Horizontal type diffused light that is ideal for deck lights on small ships.

●A stylish horizontal type LED light that uses six 3W LEDs.

●It has IP67 waterproof performance, making it ideal for marine use.

●Size: Width 160 x Height 46 x Depth 63mm

●Weight: 530g

●Mounting bolt size: M8

●Wiring cord length: 520mm

●Light intensity: 1179lm

●Color temperature: 6000K

●Input voltage: DC10-30V

●Power consumption: 16.8W

●LED chip: OSRAM

●Waterproof performance: IP67