Collection: tool

■Total length: 50cm long pick tool
■Includes: Leather pick tool cover included

Quickly picks up plastic, tree branches, aquatic plants, etc. that get caught in the impeller while driving without having to remove or remove the intake gate.

[Compatible models] YAMAHA Marine Jet 760/1100/1200/1300/4 stroke (700 not available)

The hose outlet is a one-touch joint connector type.
General-purpose one-touch connectors can be used.

When flushing the engine using salt remove fluid,
When connecting the hull and mixer, use this product and wash with water.

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-L x 2: Tie down pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces *The hook in the image is not included. (Image of use in conjunction with multi-hook made by other companies)

Stainless steel tie-down belt ratchet type automatic winding trailer

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

[Adaptation] MIUKNI Needle Screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

[Adaptation] KEIHIN needle screw
[Application] Special tool used when adjusting needle screws

●It can be adjusted very easily.

[Applicable models] For KAWASAKI 4 strokes

[1] UL19310 ULTRA310/300 only
[2] UL19311 for KAWASAKI 4 stroke *ULTRA310/300 cannot be used
*When installing on models other than NEW SX-R,
Please purchase the intake manifold gasket [genuine part number: 11061-0813] separately.

Have you ever thought that it is difficult to replace the oil filter in the original mounting position?
This product is an aluminum machined oil block that eliminates the confusion when changing oil filters.
By changing the installation direction 90 degrees, you can easily access the oil filter.

[Applicable models] For KAWASAKI 4 strokes

[1] UL19310 ULTRA310/300 only
[2] UL19311 for KAWASAKI 4 stroke *ULTRA310/300 cannot be used
*When installing on models other than NEW SX-R,
Please purchase the intake manifold gasket [genuine part number: 11061-0813] separately.

Have you ever thought that it is difficult to replace the oil filter in the original mounting position?
This product is an aluminum machined oil block that eliminates the confusion when changing oil filters.
By changing the mounting direction 90 degrees, you can easily access the oil filter.

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

A slip and scratch prevention protector made of EVA mat.
Made of the same material as the deck mat, it is essential for preventing scratches from ratchet parts such as belts.

■Quantity: 1 set of 2 ■Material: Made of EVA mat ■Size: 100 x 230mm

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-M x 2 pieces: Tie down pad M size 2 pieces

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off from the trailer every time.

[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces

*The hook in the image is not included.
(Image of use in conjunction with multi-hook made by other companies)

Tie-down belt ratchet type automatic winding trailer