Collection: Trailer hitch members/supplies

The one-shaft slide lever reduces the frustration of not getting caught, which is common with two-shaft types. The 8” spoke wheels give it a cool look.

■Maximum load: 680kg/1500LBS
■Mounting frame: up to 76.2 x 127mm
■Stroke: Approx. 250mm
■Material: Steel
■Tire: Made of resin

[Staff comment]
The biggest feature of this jack is that it uses a "one shaft slide lever".
Most conventional jacks have two shafts, so they have a large clearance to fit two shafts into the holes at the same time, which tends to cause rattling.
As you use it, the shaft may not engage properly and may become wobbly.
The number of shafts is reduced from two to one, resulting in less rattling and clearance and superior durability.

The casters use spoke wheels and have a high quality and stylish finish.
The caster housing bracket is of the highest quality and durability, avoiding the use of cheap welding and using three-dimensional bending to strengthen its weight resistance.

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

SOREX ZERO trailer sticker
■Size: 1000x50mm
■Sold in units of 1 piece

STKS15-ZERO17-B Black 1 piece
STKS15-ZERO17-W White 1 piece

SOREX trailer sticker
■Size: 510×51mm
■Color selection, sold in units of one piece

STK001-BLA
STK001-REA

●LED light
●Lamp size: 200 x 95 x 30mm
●Mounting hole pitch: 51mm x 4 (2 locations used)
●Please choose left or right when looking at the trailer from behind. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Please be sure to fill in "Notes" when ordering]
●Please specify the trailer model and turn signal position (inside or outside).

ST-094R right side
ST-094L left side

ST-089-42 Chain brake (U bolt size 42×100mm)
ST-089-47 Chain brake (U bolt size 47×100mm)
ST-089-52 Chain brake (U bolt size 52 x 100mm)

[Ordered products]

■Wooden bank ■Total length: 1,850mm

●Trailer side waterproof connector

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

【please】
When ordering, please let us know the trailer model and installation location.

■Lineup
SRX-016-B1 For side frame
SRX-016-B2 for tongs
SRX-016-B3 Wide

*10 inch wide tires are
It can be mounted vertically to the side frame using the wide (SRX-016-B3) bracket.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

Further durability has been added to the buckle and ratchet parts.

●Belt width 25mm x length 4.5m
- 24cm from ratchet to S hook, thickness approximately 1.6mm
*Please allow slight errors due to measurements made by our staff.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

■The winch and strap set is a great value. Recommended for replacing rusted or broken winches!

■Large hook winch winch with strap

[Product specifications]

■Winch: Steel chromate plated

■Load capacity: 725kg

■Belt length: 7.5m

■Belt width: 5cm

*Cannot be used for vertical movement.

●This is a single trailer winch handle.

●Can be used as a repair replacement for rusted or deteriorated handles.

●Suitable for most boat trailer winches.

●Material: Stainless steel

●Size: Approx. 19cm x 0.5cm・Handle part: Approx. 11.3cm

●Handle mounting hole: approx. 9.4mm x 12.7mm

*The included nut may not be usable depending on the winch you have.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 920kg / 2000LBS

■Handle length: 210mm

*Body/handle only.

*Winch strap is not included.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 727kg / 1600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 630kg/ 1400LBS

*Body/handle only.

*Winch strap is not included.

■Gear can be changed to 2 speeds

■Can be used in forward rotation lock, reverse rotation lock, and 3 free stages.

■The handle is thicker and easier to grip.

■Gear ratio: 5:1/12:1

■Material: Steel plating

■Maximum towing load: 1100kg / 2500LBS

■Handle length: 250mm

*Body/handle only.

*Winch strap is not included.

■With forward rotation lock

■Gear ratio: 3.1:1

■Material: Steel plating

■Maximum towing load: 270kg/ 600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

With safety nut washer

■Size (A×B×C): 90×88×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 70×63×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 90×60×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

For 5 tons

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit wiring bracket is not included.

This is a ball mount removable hitch bracket for Toyota Land Cruiser 70/80 series, Nissan Safari, Mitsubishi Pajero (excluding V78 and later), Isuzumyu, Jeep, etc. that have mounting holes in the rear frame or bumper.

■Bolt hole pitch = height: 45mm width: 85mm
■Standard ball mount (bottom) height: -123mm from the bottom of the mounting bolt

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit and wiring bracket are not included.

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.