Collection: Trailer hitch members/supplies

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

Further durability has been added to the buckle and ratchet parts.

●Belt width 25mm x length 4.5m
- 24cm from ratchet to S hook, thickness approximately 1.6mm
*Please allow slight errors due to measurements made by our staff.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 920kg / 2000LBS

■Handle length: 210mm

*Body/handle only.

*Winch strap is not included.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 727kg / 1600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 630kg/ 1400LBS

*Body/handle only.

*Winch strap is not included.

■Gear can be changed to 2 speeds

■Can be used in forward rotation lock, reverse rotation lock, and 3 free stages.

■The handle is thicker and easier to grip.

■Gear ratio: 5:1/12:1

■Material: Steel plating

■Maximum towing load: 1100kg / 2500LBS

■Handle length: 250mm

*Body/handle only.

*Winch strap is not included.

■With forward rotation lock

■Gear ratio: 3.1:1

■Material: Steel plating

■Maximum towing load: 270kg/ 600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

With safety nut washer

■Size (A×B×C): 90×88×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 70×63×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

For 5 tons

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit wiring bracket is not included.

This is a ball mount removable hitch bracket for Toyota Land Cruiser 70/80 series, Nissan Safari, Mitsubishi Pajero (excluding V78 and later), Isuzumyu, Jeep, etc. that have mounting holes in the rear frame or bumper.

■Bolt hole pitch = height: 45mm width: 85mm
■Standard ball mount (bottom) height: -123mm from the bottom of the mounting bolt

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit and wiring bracket are not included.

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

●Can be installed on tongue frames up to 75 x 75 mm.
●Galvanized finish.
●Inner dimensions: Length 520 x Width 300 x Height 71mm.

*Please contact us regarding delivery dates for back-ordered items.

■Compatible with: Spare tire for SUNTREX ■Tire size: 145/80R12-6PR
■Wheel size: 12×3.5 100 4H +35

■Material: Steel plating

■Size [Ball diameter / Housing width / Maximum towing weight]
TC-05: 1-7/8 inch / 62.5mm / approx. 907kg
TC-06: 1-7/8 inch / 75.0mm / approx. 907kg

[Caution] The plating may peel off or be scratched during transportation.

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 75mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Steel plating
[Stainless steel type (product number: TC-03SUSP)]

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

Trailer frame compatible with 50mm width
*Displayed size may vary depending on individual items.
*If there is any wobble even after tightening sufficiently, please prepare a separate spacer.

●Made of stainless steel with the highest durability and corrosion resistance.
●Stainless steel polished mirror finish emphasizes stylishness.

[Product specifications]
■Ball diameter: 2 inch compatible
■Mounting frame width: 50mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Stainless steel mirror finish
*There is also a product compatible with 75mm trailer frame. [Product number TC-03SUSP]

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm x 85mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

Hydraulic inertia brake for disc brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For drum brakes, product number ST-148-01

For drum brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For disc brakes, part number ST-148-02

●Product size: 95×45×10mm
●Mounting hole pitch: 39mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Sold in units of 1 piece ●For Solex 13 inch

●A hub and bolt set.
●4 holes PCD100 ●Offset +40
●Hub diameter: 64mm
●Bearings and oil seals are not included.
*Bearing kit part number: SRX-ST-006

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

SOREX genuine parts combination lamp

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Sales unit: 1 piece (2 pieces required when replacing left and right)
■Sold only in black
■Size: L845×W265mm
■For 10 inch wide tires

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・The shipping fee is [shipping fee x quantity] for each item.

●Set price includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

●Price includes shipping and includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Ordered products]

●For 1 wheel
●Leaf spring for NF-2K.

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*For back-ordered items, cancellations, changes, and returns are not possible after order confirmation (delivery date information)

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
ZERO series, S50G/N, 193SL, TWIN JT SW, 14FWG-FWB, 14FW-GW, 15FW-GW, 16FW, 17FW,
AT-500, NF-2

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

This is a [order item].

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
(S35B, S35G, 14FB/FG, NF-1/E, MB, LC150R, LF200, CAMPY〈K4〉, KC250/250K/350K)

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

●Sold in units of 1 piece ●For Solex 12 inch

For ST-004 and ST-021 hubs.

Size: W1/2-20

For PWC/black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

for boat MB

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[set content]
Bow tower, winch stand, bow roller, end cap, bolt, nut

For boat black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

For boats and galvanizers

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

●Sold in units of 1 piece

●Inner diameter: 49.5mm
●Outer diameter: 50.8mm
●From the entrance tip to the brim: 7mm

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.