Collection: Trailer hitch members/supplies

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

■Size: Total length 180mm x 80mm
■Shaft diameter: Ф16.0mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

●Loop strap for Dutton PWC.
●Winch belt with small hook.
- Comes with a loop strap that is convenient for fixing the PWC without damaging it.

[size]
■Strap width: approx. 5cm, length: approx. 3.6m, stitch width: approx. 9.5cm
■Loop part: approx. 2.54cm, length: approx. 1.22m

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

[Product size]
■Total length (A): 283.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 245.0mm
*Accessories: End cap

[Product size]
■Total length (A): 235.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 194.0mm
*Accessories: End cap

[Product size]
■Total length (A): 136.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 99.0mm
*Accessories: End cap

■Slide width (A): 126.0mm
■Inner width (B): 306.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 255.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 206.0mm
■Depth (C): 163.0mm

■Slide width (A): 127.0mm
■Inner width (B): 128.0mm
■Depth (C): 103.0mm

This is the bracket required to secure the keel roller and attach it to the trailer.

■Slide width (A): 65.0mm
■Inner width (B): 112.0mm
■Depth (C): 103.0mm

■Roller diameter (A): 89.0mm
■Width (B): 194.0mm
■Shaft diameter (C): 16.0mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.

■Material: Steel plated
*The grip part is narrower type.

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

■Roller diameter (A): 89.0mm
■Width (B): 295.0mm
■Shaft diameter (C): 16.0mm

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

■Mounting frame: up to 76.2 x 127mm
■Material: Steel/galvanized
■Maximum load: 680kg / 1500LBS
■Stroke: 300mm
■Wheel diameter: 6" double / 152.4mm

It makes it easy to put on and take off with minimal strain.

■Material: Steel plated

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

●A trailer jack made of aluminum with a novel design.

●Flat plate type. Foldable type.

■Mounting frame: up to 76.2 x 101.6mm
■Material: Aluminum
■Maximum load: 900kg
■Plate diameter: 178mm

●Made by Fulton, a leading American trailer parts manufacturer.

■Maximum towing load: 580kg. 1300LBS.
■Drum winding capacity: Supports strap lengths up to 20FT (approximately 6,096mm)
■With 2-way ratchet lock
■Handle length 22cm
■Material: Main body made of steel

*Cannot be used for vertical movement.
*Strap is sold separately.

●Made by Fulton, a leading American trailer parts manufacturer.

■Maximum towing load: 400kg. 900LBS.
■Drum winding capacity: Supports strap lengths up to 15FT (approximately 4,572mm)
■Handle length 20cm
■Material: Main body made of steel

*Cannot be used for vertical movement.
*Strap is sold separately.

●Two-way ratchet lock with plastic cover.

●Material:
[Body] Steel
[Cover] Plastic
●Maximum towing load: 680kg
●Handle length: 23Cm
●Strap size: Width 2" (approx. 5.08cm) 20FT (approx. 609.6cm)

●Twin wheels with wheel lock

■ Foldable
■ Maximum load: 725kg
■Stroke: 254mm
■Applicable trailer frame width: 76 x 102 mm
■ Wheel size: 178mm x W140 (43x2)
■ Wheel lock included
■Made of aluminum

●The mounting base can be adjusted.

■Length adjustable from 61 to 91cm

●Supports the outboard motor when towing a trailer, reducing the burden on the transom.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Up to 2 items can be sent together

[Product size]
■Total length (A): 159.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 127.0mm
*Accessories: End cap

■Roller diameter (A): 75.6mm
■Width (B): 127.0mm
■Shaft diameter (C): 16.0mm

●It is even safer to hang a wire chain to prevent theft when storing the trailer.
●Hitch ball diameter: Compatible with 1 7/8", 2", 2 5/16".
●Equipped with a slide cover that protects the keyhole from dust.

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

●The handle is symmetrically designed and can be attached to either side.
●The length can be adjusted to 15, 18, 20, and 23cm.
●Die-cast housing type that is resistant to corrosion.
●The drum can be switched between forward rotation, reverse rotation, and free rotation.
[Note] It cannot be used for vertical lifting.

■Material: [Shell] Aluminum, [Drive part] Steel
■Maximum towing load: 906kg / 2000LBS
■Strap length: 20FT (approx. 6m)
■Size: Width 140x Total length 270x Height 205mm
■Installation surface size: width 85x length 160mm
■Self weight: Approximately 5kg

●A trailer jack made of aluminum with a novel design.

●Wide single wheel. Comes with wheel lock.

■Mounting frame: up to 76.2 x 101.6mm
■Material: Aluminum
■Maximum load: 725kg
■Stroke: 250mm
■Wheel diameter: 178mm

[120 size]

●One set of mounting brackets (2 pieces) is required to install one rail.
Size: Height 20cm x Width 7cm

The 4FT rail has 5 rollers, allowing you to smoothly load and unload the boat.

●Size:
Total length 1,220mm
Width 70mm
Roller diameter: 63mm

●Loading weight: 543kg

*One set of separately sold "26450 mounting bracket (2 pieces)" is required to install one rail.

■Material: Steel
■Ball size: 50mm
■Shaft diameter: 19mm
■Maximum towing weight: 1350kg
■Total length: Approximately 110mm
■Shaft length: approx. 40mm
■Below the neck: approx. 70mm
*Please note that there are individual differences in size.

●Hitch ball diameter: Compatible with 1-7/8", 2", 2-5/16".

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

■Made of steel plating
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX class III
■Size: φ16mm×85mm