Collection: mooring equipment

●This is a mark buoy that is ideal for setting up courses for water skiing, wakeboarding, and personal watercraft.

■Diameter: Approximately 50cm

【please note】
Air injection nozzle is not included.
*Please purchase the hand pump (model number: 97520) separately.
*It will be delivered with the air removed.

●Can also be used as a fender for slalom buoys and personal watercraft.

●This is a buoy manufactured by Polyform that has an eye on one side only.

●Size: 15×39cm

【please note】
Air injection nozzle is not included.

[Product specifications]
■Material: Plastic
■Size: 76φ×127mm
■Hole diameter: 12mm

●Small and lightweight type makes it convenient to move!
●You can also set up a course or float ropes, etc.

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●8φ×10m

●Please use when mooring to a pier or quay.

●The fender has a split structure that follows the hull.

●We recommend using 4 pieces per boat, 2 pieces on each side.

• Durable polycarbonate grommets on both ends
• Size: 26 x 10 x 7 cm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

This is a marking buoy that is ideal for setting up courses for marine sports.
It can also be used as an anchor marker.

■Diameter: Approx. 20-25cm

[Note] Air injection nozzle is not included.

*Please purchase the air injection nozzle (part number: 97560) separately.
*The product will be shipped deflated.

●Material:
polyethylene foam
UV resistant polyester laminate vinyl cover

[Product specifications]
■Size:
Diameter: 178mm
Total length: 580mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

[Product specifications]
■Quantity: 2 pieces 1 set
■Material: Nylon mesh
■Rope diameter: 3/8" (approx. 10mm)
■Length: 5ft (approx. 1.5m)

●A flexible and easy-to-tie nylon mesh rope with eyes for use with fenders.

30852 black
30853 Blue
30854 White

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 200m Black x Green

●Material: Polypropylene (PP)

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 100m Black x Green

●Material: Polypropylene (PP)

We also have a good value 200m roll.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 50m Black x Green

●Material: Polypropylene (PP)

There are also 100m and 200m rolls available.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 20m Black x Green

●Material: Polypropylene (PP)

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 10m Black x Green

●Material: Polypropylene (PP)

[Product specifications]
■Material: PVC
■Size:
Diameter: 110mm
Length: 410mm
Rope hole diameter: 12.7mm

■Applicable boat size guide: 10-20f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

[Product specifications]
■Material: PVC
■Size:
Diameter: 140mm
Length: 510mm
Rope hole diameter: 12.7mm

■Applicable boat size guide: 10-20f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

[Product specifications]
■Material: PVC
■Size:
Diameter: 150mm
Length: 560mm
Rope hole diameter: 19.1mm

■Applicable boat size guide: 20-30f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

[Product specifications]
■Material: PVC
■Size:
Diameter: 180mm
Length: 660mm
Rope hole diameter: 19.1mm

■Applicable boat size guide: 20-30f
■Injection method: Pin type nozzle

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.
*It will be delivered with the air removed.

Material: Body = SUS304 Pin, spring, latch = SUS304

Size: d=10 L=123 L1=91 S=20 D=21 E=18 E1=22

Weight = 410g

Working load = 0.5t

Material: SCS14 (equivalent to SUS316)

Size: L=100 B=16 P=30 H=24 Hole diameter 5mm

Weight: 120g

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=12 L=84 L1=60 B=48 B1=24 B2=42 T=12 D=24

Thread diameter: W1/2

Weight: 250g

Working load: 400kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=10 L=70 L1=50 B=40 B1=20 B2=35 T=10 D=20

Thread diameter: W3/8

Weight: 150g

Working load: 320kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=8 L=56 L1=40 B=32 B1=16 B2=28 T=8 D=16

Thread diameter: W5/16

Weight: 80g

Working load: 220kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=6 L=42 L1=30 B=24 B1=12 B2=21 T=6 D=12

Thread diameter: W1/4

Weight: 35g

Working load: 140kg

Material: Main body = SUS304

Size: d=10 L=110 L1=90 B=48 B1=28 S=13

Weight: 140g

Working load: 150Kg

Material: Main body = SUS304

Size: d=10 L=80 L1=60 B=44 B1=24 S=18

Weight: 100g

Working load: 70Kg

Material: Main body = SUS304

Size: L=72 L1=55 B=39 B1=22 S=18 T=7

Weight: 60g

Working load: 50Kg

Material: SCS13 (equivalent to SUS304) Spring, pin, latch = SUS304

Size: d=8 L=120 B=62 S=18 D=29

Weight = 180g

Working load = 100Kg

Material: SCS13 (equivalent to SUS304) Spring, pin, latch = SUS304

Size: d=7 L=102 B=54 S=17 D=21

Weight = 130g

Working load = 95Kg

AK Spring Hook with Eye

Material: Body = SUS316 Spring = SUS304

6mm: d=6 L=60 L1=48 B=35 S=12 D=9, weight: 30g, working load: 70Kg
8mm: d=8 L=80 L1=64 B=46 S=18 D=12, weight: 70g, working load: 150Kg
10mm: d=10 L=100 L1=80 B=56 S=21 D=15, weight: 135g, working load: 200Kg
12mm: d=12 L=120 L1=96 B=68 S=25 D=18, weight: 232g, working load: 300Kg