Collection: Trailer hitch members/supplies

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

The belt wound inside the housing can be stretched to the desired length, hooked onto the transom handle (eye) of the boat, etc., and wound and secured with a ratchet.
Unlike regular tie-down belts, there is no need to take the time to attach and detach them from the trailer every time.
Secure it to the rear of the trailer using the mounting brackets.

●Material: Stainless steel (metal parts)
●Contents: 2 pieces in 1 set ●Belt width: 48mm x length ~900mm
Load capacity: 3000LBS (1360kg)/2 pieces

[Note]
*The hooks in the image do not come with mounting brackets (sold separately). Example of using a multi-hook from another company (SRX-143L, SRX-143R)

Bumper cover for premium package
Material: ABS
Mounting bolt included

●Plating (TOP photo: center)
●Sold as one side (separate left and right shapes)

0754-04 Left side
0754-05 Right side

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

●Left and right sold separately. Sold as 1 piece each.
(Please choose left or right when looking from the rear of the trailer.)

●Additional hook for fixing ●Plate required when installing retractable transom tie-down.
●A hook compatible with advanced LED combination lamps.

■Includes mounting bolts and nuts

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-L x 2: Tie down pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces *The hook in the image is not included. (Image of use in conjunction with multi-hook made by other companies)

Stainless steel tie-down belt ratchet type automatic winding trailer

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: Stainless steel hook winch strap Product number: SRX-149R Red Product number: SRX-149B Blue Product number: SRX-149Y Yellow
Product number: SRX-149K black

High quality winch strap with durable stainless steel hook

Available in 4 colors: red, blue, yellow, and black that stand out as accents.

The loop strap that comes with the hook is a SOREX special specification with a length of 40cm, which is the same as the existing winch strap and is sewn in Japan for peace of mind.

Strap width 50mm x length 6m Center pin included

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel plated

■Pin diameter: 6.0mm

■Pin width: 17mm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

◆For ZERO 500Z Avanzard◆
*Triangular reflector is not included.

[Advanced LED combination lamp limited model special specification]
・Bronze color reflector gives a sharper rear view
・Changed to a bright red light bar
・Advanced sequential turn lamp

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

Bumper cover for premium package
Material: ABS
Mounting bolt included

●Black (TOP photo: top)
●Sold as one side (separate left and right shapes)

0754-06 Right side
0754-07 Left side

●Color: 4 colors ●Width: 50mm
●Belt length: 5,000mm

Adding a multi-strap function to the hook part reduces damage to the hull!
The functionality has been improved as it can be easily fixed to PWC where hooks are difficult to pass through.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue

Hitch ball cover ■ Suitable for ball sizes 1-7/8 inch / 2 inch

Red Yellow Blue Black

■It is very convenient when the tie-down belt hook cannot be hung or the belt cannot reach, such as when transporting a jet loaded on a trailer.

■You can loop it and hang it on the hook anywhere.

■Quantity: 2 pieces 1 set

■Total length: 50cm

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and protect the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

Stylish design with steps on the front and back for convenient maintenance!

■Sales unit: 1 piece (2 pieces required when replacing left and right) Common shape for left and right ●Accessories: None

[Requests and notes when ordering]
*Please let us know the trailer model when ordering. It may not be possible to install depending on the model of trailer.
The following information is required for compatibility confirmation and product arrangement.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

★Cannot be installed (example): 2019 TWINJETSW cannot be installed

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

●Sold in units of 1 piece.
●Round shape

- Lamp size: 102 x 51 x 28mm

●Water resistant specifications

●Sold per unit

It has a ``water resistant'' design that can withstand water from above, such as rain and car washes.
Avoid submerging the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

Tie-downs are essential for fixing boats, jets, etc. at the transom.

●Material: Steel (metal fittings part)
●1 set of 2 pieces
●Belt width 50mm x length 1.2m

■It becomes a safety chain when the trailer comes off from the car when towing the trailer.

■Material: Steel plating

■Chain length (not including S hook): 1,170mm

■S hook length: 110mm

■Hook part thickness: 11mm

Made of PU (polyurethane) material, it is soft to the touch.
Protects from accidents such as shin guards.
hitch ball cover

■Material: PU material
■Correspondence:
Ball size 1-7/8 inch / 2 inch common

Can also be used for SOREX, TIGHTJAPAN, and blast trailers!

●Applications: license plate lights, side markers, backlights, etc.
●Mounting screws are not included. Please prepare separately.
●Equipped with 4 LED lights
-Size: 52 x 101 x 27mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

[Ordered products]

●Narrow type: Uses LEDs with a narrow irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- ----------------------------