Collection: Trailer hitch members/supplies

■Specifications: Vinyl coating
■Length: 600mm (excluding hook)
■Hook part thickness: 10-11mm
■Hook length: 110mm
■Wire thickness: 8φ

Helps prevent the trailer coupler from falling off.

■Material: Stainless steel
■Pin diameter: 6.0mm
■With strap

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

With safety nut washer

■Size (A×B×C): 70×63×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Convenient for moving trailers.

Product name: Coupler handle Product number: SRX-030

One M12 bolt included

*For installation on trailers with inertia brakes,
A separate handle mounting bracket is required.

The one-shaft slide lever reduces the frustration of not getting caught, which is common with two-shaft types. The 8” spoke wheels give it a cool look.

■Maximum load: 680kg/1500LBS
■Mounting frame: up to 76.2 x 127mm
■Stroke: Approx. 250mm
■Material: Steel
■Tire: Made of resin

[Staff comment]
The biggest feature of this jack is that it uses a "one shaft slide lever".
Most conventional jacks have two shafts, so they have a large clearance to fit two shafts into the holes at the same time, which tends to cause rattling.
As you use it, the shaft may not engage properly and may become wobbly.
The number of shafts is reduced from two to one, resulting in less rattling and clearance and superior durability.

The casters use spoke wheels and have a high quality and stylish finish.
The caster housing bracket is of the highest quality and durability, avoiding the use of cheap welding and using three-dimensional bending to strengthen its weight resistance.

[Ordered products]

●Narrow type: Uses LEDs with a narrow irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- ----------------------------

●Bolt diameter size: M10

●Trailer side waterproof connector

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 920kg / 2000LBS

■Handle length: 210mm

*Body/handle only.

*Winch strap is not included.

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

■With forward rotation lock

■Gear ratio: 3.1:1

■Material: Steel plating

■Maximum towing load: 270kg/ 600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

[Compatible models]
Tight Japan MAX trailer: RR single, C-1, A-1, LOPROSS, PROPOSITION

[Kit contents]
Stainless steel U BOLT set Length: 150 x Width: 63 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 10 4 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 12 4 pieces
Stainless steel U BOLT set Length: 70 x Width: 97 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 110 x Width: 63 x Bolt diameter: 10 4 pieces

*If you are installing a wood rail, you will need 4 pieces of 09013-01, and if you are installing a flat rail, you will need 8 pieces of 0903-01.

[U bolt 1 contents]
Two nylon lock nuts and two washers are included with each U-bolt.

■Material: Steel plating

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

■Details
[Product number: Ball diameter / Housing / Maximum towing weight / Mounting hole spacing]
TC-01: 2 inches / 50.0mm compatible / 1,588kg / approx. 77mm

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●SOREX tire lock type trailer only

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

●Sold in units of 1 piece.
●Oval type (for disc brakes)

There are two holes for attaching parts for Solex PWC trailers from 2013 onwards, vertically on the reflector.

■For trailer installation. With bolt ■Size: 160mm on one side
■Mounting bolt spacing: 65mm

●SOREX license lamp.

●Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.

*Dimensions of part A in the image are 60mm type.
(A type with dimension A of 20 mm (product number SRX-121-01) is also available.)

●Quantity: Sold in units of 1 piece.

●Additional hook for fixing
●Compatible with frame sizes up to 75mm x 45mm.
*Dimensions of part A in the image are 20mm type. (A type with dimension A of 60mm (product number SRX-121-02) is also available.)

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

●Dust cover only
●Prevents dirt, mud, etc. from entering the bearing protector.

●Sold in units of one.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.

■Application: Winch strap
■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-60S large hook 6.0m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

Steel neck 50mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there are individual differences in size, so please use this as a guide.

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

[Material] Stainless steel

●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)

Triangle reflector with built-in LED 18 chips
Waterproof performance that clears IP67 standard

●Size: 160mm on one side
●Lights up in conjunction with brake and small.
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■M8 50x50 square pipe bolt

■Bolt size AxBxC: 70x63xφ8

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe horizontal bolt

■Bolt size AxBxC: 70x97xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 80x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

●By adding "stop" to "hang" on the hook part, it is possible to prevent the hook from falling when it is fixed, making it easier and more secure to tie down.

●Belt width: 25mm, Fixed side belt length: 300mm, Winding side belt length: 3,200mm

[The base part has been changed to black]

●Aluminum wheels and handles have grill nipples, so regular lubrication will ensure smooth operation.
●The tires are made of soft rubber and can be moved more quietly.
●Can be removed from the wheel and replaced. [Product number: 0702-01 Replacement tire base]

[Product number: 0702-00]
■Foldable type
■With stopper

■Material: Aluminum
■Maximum load: 360kg
■Stroke: 280mm
■Wheel diameter: 150mm

■Quantity: 2 pieces 1 set
■Support: Common for regular cars and light cars

Resin pin for absorber

●2 pieces set
●Material: ABS + stainless steel (core)
●TIGHT JAPAN genuine

ADEL It is designed exclusively for ADEL trailers, so it cannot be installed on other vehicle models.

■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-60 Galfender 1 wheel *Stays, bolts, etc. are not included.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

225 tire + wheel set
●Sold in units of 1 piece
●PCD114.3 5H 7J (5 holes)

0501-06 Black wheels

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■Made of stainless steel ■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

●Color: Black

●Width: 50mm Belt length: 5,000mm

●By adding a multi-strap function to the hook part, it reduces damage to the hull and can be easily fixed to PWCs where hooks are difficult to pass through, improving functionality.