Collection: body parts

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Compatible models]
KAWASAKI Kawasaki :KH
SEA-DOO: ALL (excluding SR/SRX/SRZ)
YAMAHA Yamaha: YQ(※)

(*) YAMAHA 760RZ/760VN, XL800 is compatible with product number "SL009".

[Reason for outlet]
Special price for stock replacement.
★There is rust on the included impeller wrench (see image)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Applicable model] YAMAHA 700XL (99-04 model) for stock engine

■Accessories: Impeller wrench only (shaft holder not included)

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/14
●3 blades
●Applicable pump diameter: 140mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Compatible models]
SEA-DOO SPARK limited engine recommendation/modified engine recommendation

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Genuine parts (OEM) part number: 292002022

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

●Genuine part number (OEM): 269501984 (old part number: 267000917)

●SGS end fitting●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

Equivalent to genuine part (OEM part number: #293200087)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

Impeller shaft for SEA-DOO 1630/1503/900 engines

●Genuine part number (OEM): 267000388

●SGS impeller shaft
- Repair and replacement parts cheaper than genuine products

[Disclaimer]
*Please note that the color of the product may vary depending on the season.

Equivalent to genuine parts (OEM part numbers: #295501204 #295501198)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

[Applicable] For SEA-DOO pump diameter 159mm pump (for 260/255/215 horsepower)

BRP OEM part number: 267000372

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

For SEA-DOO 4-stroke 155mm pump (for 185/155/130 horsepower)
[Compatible] SEA-DOO pump diameter 155mm
[Representative models] GTX155('04-) / GTX SC 185 / WAKE155 / GTI155 / GTI130

●Genuine part number (OEM): 267000419 (old part number: 267000104)

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

[Compatible models] SEADOO Spark
●Genuine part number (OEM): 267000925, etc.

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer]
Please note that product colors may vary depending on the time of arrival.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

Available in 2 colors

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models]
KAWASAKI Kawasaki SX-R1500

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

[Compatible models]
KAWASAKI Kawasaki 800SX-R

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

[Compatible models]
KAWASAKI Kawasaki 440/550

Straight-line stability at high speeds is significantly improved.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

KAWASAKI SX-R 1500 4 stroke

NEW Venturi Gate for SX-R 1500

KAWASAKI ULTRA310LX / 310R / 310X SE / 310X / 300X / 300LX

●Designed to improve water absorption efficiency across the entire speed range while minimizing the impact on top speed, making it suitable for a wide range of uses, from leisure use to racing.

KAWASAKI Kawasaki 800SX-R / 800X-2

Venturi gate (SPEC 6) / 2 fins

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models]
YAMAHA FZR FZS

●Mirroless camera for a stylish and lacy look.

[Compatible models] YAMAHA Yamaha SJ (2021 and later models)

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
EX (2017-)
EXR

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.
Fins can be adjusted to 4 levels

[Compatible models] YAMAHA SHO ('12-)/SVHO/FZS ('14-)
2012-2018 FX CRUISER HO (1.8L)
2012-2016 FX SHO (1.8L)
2012-2016 FX CRUISER SHO (1.8L)
2012-2018 FX HO (1.8L)
2014-2018 FX CRUISER SVHO
2014-2018 FXSVHO
2014-2016 FZR
2014-2016 FZS

●PRO series sponson.
●You can change the position to suit your riding.
●Achieves agile cornering.

[Compatible models] YAMAHA SJ (2021 model)

The intake gate is the part that allows water to flow into the pump case.
It has the effect of improving the grounding to the water surface.

[Compatible models] YAMAHA
FXSVHO (2014-2022)
FX SHO/HO (2012-2022)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

intake gate

[Compatible models] YAMAHA FZS SVHO (14-16)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

[Compatible models] YAMAHA SJ (2021 model)

Improves top speed and handling performance.

[Compatible models] YAMAHA FX('19-)
FX SVHO (2019-20)
FX LTD SVHO (2019-20)
FX HO (2019-20)
FX CRUISER SVHO (2019-20)
FX CRUISER HO (2019-20)

Improves top speed and handling performance.

[Compatible models]
YAMAHA FZS/FZR (~13 years)

●Improvement of top speed Improved handling performance.

[Compatible models] YAMAHA SJ (08-20)
Improves top speed and handling performance.

[Compatible models]
SEA-DOO GTX SC 185 / GTX215 / RXP 215 / RXT 215 / RXP-X 255 / RXT-X 255

●Blocks off Opus and improves handling performance.

[Compatible models] SEA DOO
RXP-X 300 (2021-2024)
RXT-X 300 (2018-2024)
GTX-L 300 (2018-2024)
WAKE PRO 230 (2018-2024)
GTX 230/170 (2021-2024)

PRO series sponsons.
This allows for agile cornering.
The grip in the corners is also very stable.

[Compatible models] SEADOO SPARK Spark