Collection: body parts

[Compatible models]
YAMAHA Yamaha FX SHO (08-11 model)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] SEADOO RXP-X 255 /RXT-X 255

Max Loader Gate from Australian manufacturer WORX.
It is designed to take in water smoothly on rough or calm water surfaces.
Hook-up handling performance, without losing top speed
We test our products under the best conditions to ensure they perform to the best of our ability.

[Compatible models]
YAMAHA Yamaha SJ(08-20)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] KAWASAKI
ULTRA
260X/260LX
250X
LX

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] KAWASAKI Kawasaki
800SX-R
800X-2

■2 wing specification.

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models]
YAMAHA FX160 / 140 / HO(-'07)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] SEA-DOO
RXT215 (-'09)
GTX 4TEC (-'09)
SC ('03-'04)

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Compatible models] KAWASAKI Kawasaki
STX15F
STX15S
STX12F
STX-R

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Model compatible] YAMAHA Yamaha
SJ (96-07) Freestyle

Max loader gate from Australian manufacturer WORX.
It is designed to smoothly take in water even in rough or flat water.
Hookup handling performance and top speed do not drop.
We test the best conditions and utilize them in our products.

[Adaptation]
YAMAHA SVHO/SHO (for YS/YV)

SOLAS impeller drive shaft holder

[Compatibility]
For YAMAHA YS/YV A stamping

Impeller live shaft holder for SOLAS

[Compatible models]
YAMAHA Yamaha FR-FZS/SHO
Drive shaft holder for SOLAS impeller YS

【Compatible models】

■Impeller wrench for SEA-DOO SOLAS SRZ-TP twin impeller

[Application] A special tool required for attaching and detaching SOLAS Twin Impeller SRZ-TP.

【Compatible models】

■SEA-DOO Impeller wrench for SOLAS SRX/SRZ

[Application] A special tool required for installing and removing the impeller.

【Compatible models】
SEA-DOO for Sea-Doo SOLAS SR/SRB

impeller wrench

[Application] A special tool required for installing and removing the impeller.

[Compatible models] YAMAHA
800GPR / 1200GPR / 1300GPR / 800XL / 1200XLT / 1200XL-L

■SOLAS Impeller YF/YG/YQ/YD (Concorde)
■155XL pump, drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 800/1200/1300GPR/1200XLT/1200XL-L/FX140/160

SOLAS impeller YF / YG / YQ YD (Concorde) compatible
Drive shaft 20mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller [for YB/YD-SC]
144 pump diameter drive shaft 18mm

[Compatible models]
YAMAHA Yamaha 650/700SJ/700/1200(-99)XL

SOLAS impeller YB/YD-SC
Drive shaft 18mm

【Compatible models】
■KAWASAKI KAWASAKI ALL models (excluding 450/550)
■SEA-DOO 2-stroke model

[Application] A special tool required for installing and removing the impeller.

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Compatible] SEA-DOO X series sponson (S3 hull / GTI hull after 2011)

[Quantity] 10 pieces
[Material] Stainless steel
[Size] 3mm

Oval washer used for SEA-DOO X series sponsons.
Reinforces the genuine sponsons and is also used as an accent part of the sponsons.

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

Kawasaki 800SX-R

A hood kit that converts the 800SX-R into a fixed steering mount like the 800X-2.

By using this KIT, you will be able to enjoy the ride of the 800X-2 on the SX-R.
The kit's steering position is feedback from the 800X-2's position.
The included steering wheel has bearing specifications and is a 2-way hood that allows you to enjoy smooth steering.

The hood inner is designed to accommodate large chambers. Also,
800SX-R stock handle pole and engine hood weigh approximately 18kg.
Whereas the normal hood/normal handle mount of 800X-2 weighs about 20kg.
The total weight of the kit is approximately 10kg, which is also a 50% weight reduction.

For conversion, all the necessary parts are included in the kit, so all you need to do is prepare the handlebar and grip.

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS front bracket,
■Holder (cable) steering [14044-3714],
■Holder (cable) [14044-3757],
■Grommet [92071-3790],
■Plate [13271-3905],
■A set of mounting bolts.
*When installing a fat bar...separately sold (product number: UL061 fat bar clamp) is required.

[Compatible models] KAWASAKI ULTRA series
ULTRA310 (~'21)
ULTRA300X
ULTRA300LX
ULTRA LX ('12～)

*ULTRA250/260 is not compatible.

[Product Name] ULTRA310/300X Front Cowl FRONT COWL

■Black gel coat finish.

It is designed to be easily converted from normal food.
Since the normal inner is used as is, the normal storage box can also be used!
Compared to the normal hood (without innerwear) which weighs approximately 3.5kg, the weight can be reduced by approximately 20%.

※※This is an unpainted product, so please paint it in your favorite color before use. ※※

【Guidance】
*Made-to-order products (usually takes about 3 weeks) Please contact us for the approximate delivery date before placing your order.
*Please note that we cannot accept cancellations or returns.

[Applicable model] KAWASAKI 4-stroke NEWSX-R 1500SXR

A low form style that eliminates design and waste.

This is the lightest design that has succeeded in reducing the weight of the original engine hood by approximately 60%, from approximately 12 kg to 4.8 kg.
Reducing the weight of the engine hood lowers the center of gravity of the hull, leading to improved maneuverability.

[Black gel coat finish]
[Accessories] Food packing

【Guidance】
The angle can be maintained by using the handle pole spring (JI03050) sold separately.

[Compatibility] Kawsaki NEW SX-R 1500SXR
For boats equipped with NewSX-R transform hood (UL46100)

Hood damper kit exclusively for NewSX-R transform hood (UL46100).
Includes a bracket to which a gas damper can be attached.
By wearing it, you can easily open and close the hood and hold it.

[Contents]
Gas damper x 4,
Upper bracket L/R (left/right) x 1 each,
Lower bracket x 1,
Mounting bolts (including washers and nuts) x 4
Spacer x8

[Compatibility]
Kawsaki NEW SX-R 1500SXR

[UL46100 transform hood] and [UL35300 shockless mount] set!

A kit to convert the 1500SX-R to a fixed steering mount like the X-2.
You can enjoy riding like X-2 with SX-R.

All you need is the handlebar and grip.
The included steering mount system uses bearings for smooth steering. The normal condition (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

It also has excellent expandability, such as the Evolution series,
Steering mount bearing type [UL35211] etc.
Height and bar clamp can be selected by combining optional parts.

[Kit contents]
■Hood body
■Steering mount ASSY
■SUS hinge bracket ASSY
■Lamp cable holder plate
■A set of installation screws
*When installing a fat bar, a separately sold [Part number: UL061 Fat Bar Clamp] is required.

[Compatibility] Kawsaki NEW SX-R 1500SXR

A conversion kit for NEWSX-R (2017) to a fixed steering mount like the X-2.
By using this kit, you can enjoy riding like the X-2 with the SX-R.

As with the 800SX-R transformation kit, all you need to prepare is the handlebar and grip.
The included steering mount system uses bearings to ensure smooth steering.
The stock SX-R (handle pole and engine hood) weighs approximately 22 kg, but by replacing it with the transform hood and steering mount, it is possible to reduce the weight by approximately 12 kg, 45%!

The height and bar clamp can be selected by combining optional parts such as the Evolution series, which has excellent expandability, and the steering mount bearing type [UL35211].

[Kit contents]
■Hood body,
■Steering mount ASSY,
■SUS hinge bracket ASSY,
■Lamp cable holder plate,
■Installation screw set *For fat bar installation, separately sold [Product number: UL061 Fat bar clamp] is required.

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

[Compatible models] Kawasaki Kawasaki
ULTRA250X('08-)
ULTRA260X/260LX
ULTRA300X / 300LX(※)
(*) When installing the ULTRA300 series... 1 silicone coupler [Product number: UL14105] is required separately.

By replacing the back of the water box outlet with aluminum, ventilation efficiency will be increased.
Radiant heat from the exhaust pipe is reduced, contributing to weight reduction, and the billet exhaust end creates a stylish rear view of the hull. The joint uses silicone hose [UL14101], which has high heat resistance, pressure resistance, ozone resistance, and resistance to deterioration.
Also, if you use the T-bolt clamp [JL0288/JL0250] together, you won't have to worry about it coming off.

[About installation] No processing required, bolt-on OK
(Bolts are not included, so please use genuine ones.)

【set content】
- End pipe x 1,
-Joint pipe x 1,
●Joint hose Φ70×70mm×1,
●Silicone hose variant Φ50-Φ70×100mm×1,
●Hose band x 2

Kawasaki 800SX-R

Compared to genuine products, they are lighter, stronger, and cheaper.
When worn, it creates a streamlined and lacy impression.

[Material] FRP
[Quantity] 2 pieces 1 set
[Installation] Bolt-on

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

[Compatible models]
Stock engine recommended for SEA-DOO RXT-X 300 (2016) (normal boat)
SEA-DOO RXP-X 300 (2016) stock engine recommended (normal boat)
Stock engine recommended for SEA-DOO GTX-L 300 (2016) (normal boat)

●Series: CONCORD
●Pitch size: 13/18
●3 blades
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO RXT-X 300 (2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO RXP-X 300 (2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX-L 300 (2016)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●Series: CONCORD
●Pitch size: 13/16
●3 blades
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

Although you cannot expect to increase the maximum speed by installing it,
In the low and medium speed range, you can get explosive power that is incomparable to the genuine impeller.

[Compatible models]
Stock engine recommended for SEA-DOO RXT-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO RXP-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO GTX-L 300 (2016-) (normal boat)

■Leading peller: 4 blades
■Main propeller: 4 blades

*Please use the genuine impeller tool (529035956) for the impeller wrench.

●Series: CONCORD
●Pitch size: 13/16
●4 blades
●Material: Stainless steel
●Product contents: impeller, impeller seal

You can experience the acceleration power at medium and low speeds, which is different from 3 blades.

[Compatible models]
Stock engine recommended for SEA-DOO RXT-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO RXP-X 300 (2016-) (normal boat)
Stock engine recommended for SEA-DOO GTX-L 300 (2016-) (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
RXT is260 / RXT-X260 / RXT as260 / RXT260 Stock (normal boat) Limited engine recommended
GTX LTD is 260 / GTX LTD is255 Stock (normal boat) Limited engine recommended
RXP-X260 / RXP-X255(09-) Stock (normal boat) Limited engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Stock (normal boat) Limited engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

Although you cannot expect to increase the maximum speed by installing it, you will get explosive power in the low and medium speed range that is incomparable to the genuine impeller.

■Leading peller: 4 blades
■Main propeller: 4 blades

【Guidance】
*Please use SOLAS impeller tool (WR012L) or genuine impeller tool (529035956).