Collection: body parts

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

Cheaper than genuine parts! !

sea ​​doo shaft carbon ring
[003-110-01] For drive shaft 22mm shaft
●Genuine product number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., SC, Wake

-------------
[003-110-02] For drive shaft 27mm shaft
●Genuine product number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

Decal kit for boats equipped with 800X-2 modified racing hood (UL032).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Decal kit for boats equipped with 800SX-R Transform Hood Kit (UL46800)

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

■Choose from two colors: green and red

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Support] M8 flat head screw

[Quantity] 1 piece
*Usually countersunk screws require counterbore processing on the mating material,
By using rosette washers, you can use countersunk screws without machining.

Be stylish with your favorite color! Also good as a design element!
You can also dress it up by replacing the bolts that secure the sponsons.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

-Newly released deck mat for SEADOO from UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] SEADOO
RXT230 / GTX / GTX LTD / WAKE PRO 230 (2019~)

- Deck mat for SEADOO newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI] ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

●For STX160, only some colors (5 colors in total) are sold.
(Black x Gray, Black x Green, Gray x Black, Black x White, White x Black)

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX-15F/12F・STX-R・1100STX(00-)/900STX(01-)

- Deck mat for Kawasaki STX-15F/12F/STX-R/1100STX(00-)/900STX(01-) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310(-'21)/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI]
STX160

- Deck mat for Kawasaki STX160 newly released by UNLIMITED.
●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

●For STX160, only some colors (5 colors in total) are sold.
(Black x Gray, Black x Green, Gray x Black, Black x White, White x Black)

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[KAWASAKI] NEX SX-R (4ST)

- Deck mat for Kawasaki NEX SX-R (4ST) newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

[Compatible models] SEADOO
GTX-LTD / GTX (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] SEADOO RXT-X / Wako Pro (2018-)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki ULTRA 310LX-S (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA 310LX (2022)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Compatible models] Kawasaki
ULTRA LX series (2009-2021)

The birth of an ideal seat cover that combines both "race" and "recreational" aspects!
The main material is a combination vinyl made of "Ballistic Nylon" and "Ultra Grade".
A non-slip top for perfect riding and UNLIMITED stitching that stands out against the black color enhances the sense of luxury!
Based on these limited materials,
This is a collaborative seat cover carefully handmade by JETTRIM, a popular American brand that is home to jet sports.

This is a custom specification that aims for the highest quality.

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

[Compatible models] YAMAHA Superjet (2021)

Made of aluminum billet

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Compatible models] YAMAHA
GP1800/FX Cruiser SVHO / FX SVHO / FZS SVHO stock engine recommended (normal boat)/Limited engine recommended *Limited...For boats where non-engine parts such as intake/exhaust and intake gate have been replaced

●You cannot expect to increase the maximum speed by installing it, but
In the low and medium speed range, you can get explosive power that is incomparable to the genuine impeller.

●It is now becoming a standard item in the racing scene.
●Nose boots and special wrench included.

[Compatible models] YAMAHA
GP1800/FX Cruiser SVHO / FX SVHO / FZS SVHO Limited engine recommended / Modified engine recommended *Limited: For boats where other than engine parts such as intake/exhaust and intake gate are replaced *Modified: For boats where engine parts are replaced For racing boats

●Series: CONCORD
●Pitch size: 14/21
●3 blades ●Applicable pump diameter: 160mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA014), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] YAMAHA
GP1800/FX Cruiser SVHO / FX SVHO / FZS SVHO Limited engine recommended / Modified engine recommended *Limited: For boats where other than engine parts such as intake/exhaust and intake gate are replaced *Modified: For boats where engine parts are replaced For racing boats

●Series: CONCORD
●Pitch size: 13/18
●3 blades ●Applicable pump diameter: 160mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA014), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Applicable model] For YAMAHA 1800cc engine (155 pump)
FX HO (09-21)
VXR/VXS (11-19)
FX SHO (08-13)
FZS (08-13)
FZR (09-10)

SOLAS Twin Impeller 14/23

Although you cannot expect an increase in top speed by installing a twin impeller, the low and medium speed range will be significantly improved compared to the stock impeller.

It is a popular item in racing and leisure scenes.
■Accessories: Nose boots, special wrench

[Compatible models]
VXS/VXR/VX HO/FX HO(09-) limited engine recommended
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 14/23
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
Stock engine recommended for FZS/FZR (normal boat)
Stock engine recommended for FX SHO (normal boat)
VXS/VXR/VX HO/FX HO(09-) limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/22
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] YAMAHA
VXS/VXR/VX HO/FX HO(09-) stock engine recommended (normal boat)
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/19
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/20
●3 blades
●Applicable pump diameter: 144mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Applicable models] YAMAHA EX Deluxe stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/17
●3 blades
●Applicable pump diameter: 144mm
●Material: Stainless steel
●Product contents: impeller, impeller seal

[Applicable models] YAMAHA EX Deluxe limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 18/22
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (SLA009)

[Compatible models]
VX / VXsport / Vx deluxe / VX crusier stock engine (normal boat)
V1 / V1sport stock engine (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] YAMAHA FX SVHO(19-)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.

[Applicable model] SEADOO GTX-L300 (18 years model -)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates.
4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] SEADOO
RXT-X300 (18 years onwards)

Control in cornering and rough conditions will be dramatically improved.
Racing sponsons with insert plates. 4 positions can be selected on the plate part.
Designed for sharp handling and increased strength.

[Compatible models] YAMAHA
FZS SVHO
FXSVHO(-18)

Control in cornering and rough conditions will be dramatically improved.
Can be installed by bolting on to the genuine hole.