Collection: body parts

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models]
KAWASAKI Kawasaki SX-R1500

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

[Compatible models]
KAWASAKI Kawasaki 440/550

Straight-line stability at high speeds is significantly improved.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

KAWASAKI SX-R 1500 4 stroke

NEW Venturi Gate for SX-R 1500

KAWASAKI ULTRA310LX / 310R / 310X SE / 310X / 300X / 300LX

●Designed to improve water absorption efficiency across the entire speed range while minimizing the impact on top speed, making it suitable for a wide range of uses, from leisure use to racing.

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models]
YAMAHA FZR FZS

●Mirroless camera for a stylish and lacy look.

[Compatible models] YAMAHA Yamaha SJ (2021 and later models)

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
EX (2017-)
EXR

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.
Fins can be adjusted to 4 levels

[Compatible models] YAMAHA SHO ('12-)/SVHO/FZS ('14-)
2012-2018 FX CRUISER HO (1.8L)
2012-2016 FX SHO (1.8L)
2012-2016 FX CRUISER SHO (1.8L)
2012-2018 FX HO (1.8L)
2014-2018 FX CRUISER SVHO
2014-2018 FXSVHO
2014-2016 FZR
2014-2016 FZS

●PRO series sponson.
●You can change the position to suit your riding.
●Achieves agile cornering.

[Compatible models] YAMAHA SJ (2021 model)

The intake gate is the part that allows water to flow into the pump case.
It has the effect of improving the grounding to the water surface.

[Compatible models] YAMAHA FZS SVHO (14-16)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

[Compatible models] YAMAHA SJ (2021 model)

Improves top speed and handling performance.

[Compatible models]
YAMAHA FZS/FZR (~13 years)

●Improvement of top speed Improved handling performance.

[Compatible models] YAMAHA SJ (08-20)
Improves top speed and handling performance.

[Compatible models]
SEA-DOO GTX SC 185 / GTX215 / RXP 215 / RXT 215 / RXP-X 255 / RXT-X 255

●Blocks off Opus and improves handling performance.

[Compatible models] SEA DOO
RXP-X 300 (2021-2024)
RXT-X 300 (2018-2024)
GTX-L 300 (2018-2024)
WAKE PRO 230 (2018-2024)
GTX 230/170 (2021-2024)

PRO series sponsons.
This allows for agile cornering.
The grip in the corners is also very stable.

[Compatible models] SEADOO SPARK Spark

[Compatible models] SEADOO
RXT-X(2012-2017)
RXP-X(2012-2020)

face plate only

[Compatible models] SEADOO
2005 to 2011
GTX / RXT / RXP / RXT-X / RXP-X

PRO series sponsons

2003-2004 SEA-DOO GTX SUPERCHARGED 185
2005-2008 SEA-DOO GTX LIMITED 215
2005-2009 SEA-DOO GTX 155
2005-2007 SEA-DOO RXP 215
2005-2009 SEA-DOO RXT 215
2005-2008 SEA-DOO WAKE 155
2006 SEA-DOO GTI PRO 130
2006-2010 SEA-DOO GTI SE 130
2007-2010 SEA-DOO GTI SE 155
2007-2009 SEA-DOO WAKE 215
2008-2010 SEA-DOO RXP-X 255
2008-2009 SEA-DOO RXT-X 255
2009 SEA-DOO GTX LIMITED IS 255
2009 SEA-DOO RXT IS 255
2010-2017 SEA-DOO GTX 155 (IC)
2010 SEA-DOO GTX IS 215
2010-2011 SEA-DOO RXT IS 260
2010-2016 SEA-DOO GTX LTD IS 260
2010-2011 SEA-DOO RXT-X 260 (IC)
2010-2012 SEA-DOO WAKE PRO 215 (IC)
2011-2016 SEA-DOO WAKE 155 (IC)
2011-2017 SEA-DOO GTI 130 (IC)
2011-2013 SEA-DOO GTI SE 155 (IC)
2011 SEA-DOO GTX 215 (IC)
2011-2013 SEA-DOO RXT 260 (IC)
2012 SEA-DOO GTX S 155 (IC)
2012-2016 SEA-DOO GTR 215
2016 SEA-DOO GTX LIMITED 300
2017-2019 SEA-DOO GTR 230
2017-2019 SEA-DOO GTR-X 230
2017 SEA-DOO GTX LIMITED S 260

[Compatible models] SEA-DOO
SPARK Spark

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

intake gate

[Compatible models] SEA-DOO
RXP-X300(2016-2020)
RXP-X260(2012-15)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

intake gate

[Applicable model] KAWASAKI 1500SX-R 4 stroke

●The design has a track record of racing,
Provides significant handling improvement over stock 1500SXR sponsons.

●The backing plate is precision machined from high-strength billet aluminum.
Anodized to prevent corrosion.

●Features a bulletproof fin mounting system that includes 3 anchor points with billet inserts.
● Sponson depth and anterior/posterior position are adjustable.
●Easy installation requires no drilling.

●Applicable models KAWASAKI
ULTRA310X/310LX/310R/310SE
ULTRA300X/300LX
ULTRA260X/260LX
ULTRA250X
ULTRA LX
PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

●Series: CONCORD
●Pitch size: 16/24
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1624 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 16/21
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/23
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1523 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/16
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA LX stock engine, limited engine recommended

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/22
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX

KR-CD-1522 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX
KR-CD-1421 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/20
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
SX-R 4-stroke stock engine recommended (normal boat)

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/16
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
1500SX-R 4-stroke limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 16/22
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
1200STX-R stock engine recommended (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F/15S Stock engine recommended (normal boat) / Limited engine recommended
STX-12F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/20
●3 blades
●Applicable pump diameter: 148mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
STX-12F Limited engine recommended/Modified engine recommended
1200STX-R Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended
900STX 01-06 Limited engine recommended/Modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

■Series: CONCORD
■Pitch size: 13/19
■3 blades
■Applicable pump diameter: 148mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-15F Limited engine recommended/Modified engine recommended
STX-12F stock engine recommended (normal boat)
1100STX DI stock engine recommended (normal boat)
1100STX stock engine recommended (normal boat)
1100ZXI stock engine recommended (normal boat)
900STX 01-06 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

■Series: CONCORD
■Pitch size: 12/18
■3 blades
■Applicable pump diameter: 148mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-12F Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended
900STX 01-06 Stock engine recommended (normal boat)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

■Series: CONCORD
■Pitch size: 11/17
■3 blades
■Applicable pump diameter: 148mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models] KAWASAKI
STX-12F Limited engine recommended/Modified engine recommended
1100STX DI Limited engine recommended/Modified engine recommended
1100STX Limited engine recommended/Modified engine recommended
1100ZXI Limited engine recommended/Modified engine recommended
900STX 01-06 Limited engine recommended/Modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

●An innovative blade design with an arcuate leading edge provides improved maneuverability without stalling even in waves. On the other hand, you can also be satisfied with a 4-seater PWC that has a large load capacity.
*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] KAWASAKI 1100STX (97) / 900STX (99-'00) / 900STS (01-02)

[Color] BLACK×WHITE