Collection: bestseller

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

[Applicable] MIKUNI SBN carburetor
006-438 For SBN38mm
006-444 For SBN44mm
006-446 For SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetor.
●KIT contents: Shaft, butterfly, E-clip, seal, bushing, nylon washer

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

Cheaper than genuine parts! !

sea ​​doo shaft carbon ring
[003-110-01] For drive shaft 22mm shaft
●Genuine product number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., SC, Wake

-------------
[003-110-02] For drive shaft 27mm shaft
●Genuine product number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

"A self-standing bucket that can be stored compactly"
This is a four-double bucket that can be used large and folded into a small size.It can be used in a variety of situations, such as outdoors, barbecues, playing in the water, and washing cars.
It is a pop-up and self-supporting portable type.
If you fold it and put it in the special bag, you can carry it compactly.
It can hold 11 liters of water.

1. For outdoor equipment storage
2. In the trash can
3.For harvest bin
4.For water pail/hand washing
5.For a drink holder

■Precautions for use: Dry thoroughly before storing.
Color may fade due to strong friction, etc.
Organic solvents such as thinner and benzine may cause discoloration.
Please do not store heavy or sharp objects.
Please keep out of reach of infants and children.

■Diameter approx. 230mm Height 270mm (when in use)
Approximately 250mm in diameter and 40mm in height (when stored)

Capacity: Approximately 11 liters Material: 600D Oxford, PVC, etc.

MADE IN CHINA

■Advance Plus/Entry Set

【set content】
・3m inflatable boat (SV-IBA300)
・SUZUKI 2 horsepower outboard motor (DF2S)
・SUZUKI engine oil 1L (99000-22B60-4T1)
・Outboard motor stand (JP-HR001)

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

[Note regarding the outboard motor stand]
*The hull air stand requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

■Heat foam plastic frame
■100% UV protection mirror lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With hard case
■Frame size 16.0x5.0cm

【Note】
This design does not float on water.
The design of the back strap may vary depending on when it arrives.

■Advance Plus/Special Set

[Set contents] Boat + 5 items ★3m inflatable boat (SV-IBA300)
・SUZUKI 2 horsepower outboard motor (DF2S)
・SUZUKI engine oil 1L (99000-22B60-4T1)
・Outboard motor stand (JP-HR001)
・5L polyester carrying can (37565)
・High pressure pump (27790)

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

[Note regarding the outboard motor stand]
*The hull air stand requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

■Medium type
■With 3/4 flange
■Size: Total length 130mm x outer diameter 30mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

●Grip that does not require bonding and is very popular in America.
●It is a type that does not use adhesive for installation and is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

●Hard type
●No flange
●Size: Total length 130mm x outer diameter 29mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

Fine granular protrusions provide high grip strength.
A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.
【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

This is a hybrid model where the sunglasses arm and strap can be easily replaced.
You can use the arm type for everyday use, and the strap for riding.

In marine sports, glare from reflected light is said to be the biggest cause of fatigue.
Eyewear is also a very important item to protect against UV rays and water splashes.

■Gray smoke lens specifications

UV care Splash Jet Ski Boat Outdoor Watercraft

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

■Heat press foam plastic frame ■100% UV protection polycarbon lens ■Rubber adjustable strap for a great fit!
■Air ventilation port prevents lens fogging ■Mesh soft case included ■It floats on water even if dropped, so don't worry

Prevents loss when dropped into water during active play near the water.
The lightness of the fitting reduces the burden on your face.

The long brim and flap provide the ultimate protection from UV rays, even in the strong summer sun.
The stretchy fabric fits any size child perfectly.
This is an amphibious summer cap.

■Material: 88% polyester, 12% polyurethane

■Size: FREE (head circumference 50-52cm)

*The red ribbon on top is not included.
*The rash guard worn is not included.

[Staff comments]
Made of rash guard material, it does not absorb water and does not become heavy even when wet.
It also protects the back of the neck, which is prone to sunburn, and protects children's delicate bare skin. If you pour water on it, the evaporative cooling effect will make it feel even cooler!
This is a convenient hat that can be worn outdoors in the strong sunlight at the beach or pool, as well as for everyday use.
The stretchy fabric fits snugly around your head and won't slip off.

Children, Kids, Elementary school students, Toddlers, Beach, River play, Water play, Glamping, Camping, Sunburn, UV care, Evaporative cooling, Cool cap hat with brim, chin strap, neck flap

The Romper Slash with back zipper is available only in baby sizes.
Protects your little one's body from cold and scratches.

This is an essential item for sun protection, as children have less melanin pigment than adults and are therefore vulnerable to harmful UV rays.
The soft thread used in the stitching prevents the garment from rubbing and causing pain even when worn for long periods of time.
We use materials that block over 99% of harmful UV rays.

■Material: 93% polyester, 7% polyurethane, YKK zipper

*Returns and exchanges are not accepted for special price items.

■【Applicable size】
80cm : 70-90cm
90cm : 80-100cm
100cm: 90-110cm

This special price is available only for the international men's XS size.

The three-buckle front-opening type allows you to easily fine-tune the size using the buckles.
The design is full of marine flair with its border pattern.
The unisex size makes it suitable for juniors, moms, and families.

■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)
■ Lifesaving whistle equipped
■MATERIAL / Nylon OX, PVC/PE foam

■ Suitable chest size XS: 76-84cm
[Disclaimer] Please note that we cannot accept returns or exchanges for special price items.

This special life jacket is designed with your child's safety in mind. In the event that they fall into the water, it is equipped with a rescue belt behind the neck that allows them to be easily lifted up, and a belt around the legs to prevent the child from falling out.

■ Suitable size: Chest circumference 67-74cm/Weight 23-39kg

■MATERIAL: Reflective tape/Rescue whistle included

Compliance with legal requirements for small vessels

This is a special life jacket designed for your child's safety.
In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

There are three safety buckles, two on the torso and one on the crotch belt, to prevent the life jacket from loosening or floating around the shoulders due to the influence of water currents. Available in sizes S to L, please choose the size that best suits your child. We recommend choosing the right size as a safety item.

■ Suitable height size
S: 110-130cm
M:120-140cm
L: 130-150cm
■MATERIAL: Reflective tape/Rescue whistle included

[Caution] Not compatible with legal equipment for small boat inspections. This product is a swimming aid and should always be used under parental supervision.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Jet Ski Personal Watercraft Watercraft Marine Jet Life Jacket JCI Inspection

The material used blocks over 99% of harmful UV rays, and the slightly thin fabric is soft, stretchy, and fits snugly to the body, making it extremely comfortable to wear.
Rash guards are an essential item that not only protects children's skin from harmful UV rays, but also protects them from abrasions, jellyfish, etc.
You can also coordinate the entire outfit with the hats, rash guards, and shoes sold in the same series.

■ Rush pants
The stretchy body-fitting material is not stiff and provides excellent athletic performance.
Recommended for water play such as swimming in pools, sea bathing, and baby swimming.
The fabric is a little thicker (80 oz) than regular rash guards, making it more durable. The inside front and crotch area are made of soft, fine inner mesh to prevent chafing. The longer length helps prevent injuries and sunburn on your thighs.

[Material] 88% nylon, 12% polyurethane

[Size] 100cm.120cm.140cm.150cm

*Accessories worn by the child models for image photos are not included.
*As this is a special offer item, returns and exchanges are not accepted.

This is a special price for clearing stock.
This life jacket is made from the same material as a wetsuit, so it is gentle on delicate skin.

■2mm Chloroprene

■ Suitable height size
S:110-130cm
M:120-140cm

●This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

[Content capacity] 2L (Standard application area: 7 square meters)

A chic ash color with a luxurious feel is now on sale.

The SEAJET series has been well received in the domestic and overseas markets since its release, and has become one of the leading paints for pleasure boats and yachts.
It is widely used as a representative product.
This product, which brings together the technology cultivated in marine paints, was highly praised for its performance in the domestic market, where up until then only overseas products had been imported and sold under license, and with the addition of a series of products, it became a top brand product in Japan. It has developed.

【Features】
The antifouling performance lasts for a long time due to the stable surface renewability of silyl resin.
The highly concentrated antifouling agent ion layer on the surface exhibits excellent antifouling power.
The self-polishing action of the paint film suppresses the increase in water flow frictional resistance.

[Precautions for use]
*Cannot be used on aluminum boats.
*Primer 015 (product number: 01499) is required when painting a new boat.
*Two coats is standard.

●SEAJET037 has significantly improved antifouling performance compared to conventional cuprous oxide-free type antifouling paints! We have developed a higher-performance paint to maintain the beautiful bottom of the ship even after it is submerged in water. In particular, the antifouling performance against adhesion of animal species such as barnacles has been greatly improved.

●Since it does not contain cuprous oxide, there is no bluing and the ship's bottom remains beautiful even after being submerged in water. It can be used not only for FRP boats but also for aluminum boats.

●An environmentally friendly paint whose activator dissolves into the sea and quickly decomposes.
●Capacity: 2L

●Hydrolyzable ship bottom paint.

Note) Cuprous oxide-free antifouling paint has a faster elution rate. Please ensure sufficient film thickness. (We recommend 100μ or more) This phenomenon is normal paint film renewal, and there is no problem with properties or performance, so please use with confidence.

These boxer shorts are a type of seamless boxer that is different from regular cotton briefs, and have almost no seams, minimizing the unevenness of the seams and providing an ultimate fit to the body.
You can wear it as underwear, but it is also recommended as an inner layer for wetsuits and board shorts.

What are seamless boxer shorts?
These boxer shorts have no seams and minimize unevenness at the seams for an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it. It has excellent elasticity and water repellency, so please use it as innerwear for wetsuits and board shorts.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*For hygiene reasons, our store does not accept returns or exchanges of underwear that is worn directly against the skin.
Please be aware of this before placing your order.

In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

■ Suitable height size S: 110-130cm
M:120-140cm
L:130-150cm

*Accessories worn by models for image shoots are not included.

[Caution] Not applicable to legal equipment for small boats. This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

This special life jacket is designed with your child's safety in mind. In the event that they fall into the water, it is equipped with a rescue belt behind the neck that allows them to be easily lifted up, and a belt around the legs to prevent the child from falling out.

■ Suitable height size S: 110-130cm (lower elementary school students)
M: 120-140cm (elementary school middle grades)
L: 130-150cm (upper elementary school)

■MATERIAL: Reflective tape/Rescue whistle included

[Caution] Not suitable as legal equipment for small boats. This product is a swimming aid and should always be used under parental supervision.
●If strong pressure is applied to the buoyancy material (foam), it may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

[Content capacity] 2L (Standard application area: 7 square meters)

●Self-polishing type suppresses increase in resistance and exhibits stable stain resistance.

●“SEAJET033” has been well received in the domestic market as the main product of the SEAJET series,
It is widely used as a representative paint for pleasure boats and yachts.

●This product, which brings together the technology cultivated in marine paints, is available in the domestic market, where until then only overseas products were imported and sold under license.
Its performance has been highly praised, and it has developed into a top brand product in Japan with an expanded series of products.

●Due to hydration and decomposition, the antifouling agent gradually dissolves even when moored, preventing the bottom of the boat from getting dirty.

●If the operating rate is low and the mooring period is long, SEAJET033, which has excellent static stain resistance, is the best choice.

- Also available in a chic ash color with a luxurious feel

[Precautions for use]
*Cannot be used on aluminum boats.
*Primer 015 (product number: 01499) is required when painting a new boat.
*Two coats is standard.

These boxer shorts are a type of seamless boxer that is different from regular cotton briefs, and have almost no seams, minimizing the unevenness of the seams and providing an ultimate fit to the body.
It's OK to wear as underwear, but it's also recommended as an inner layer for wetsuits and board shorts.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin.

Since it is foldable and open/close, just put the hanger inside the suit from the neck part while it is folded.
The thickness of the hanger creates space inside the suit, allowing for better ventilation and faster drying.
It also has a structure that speeds up drying of wet clothes without leaving hanger marks.

Easy operation and smooth attachment/detachment. Easy one-touch maneuverability with a focus on "ease of use" allows for smooth attachment/detachment even when the neck entry is wet.

■Domestic products

■Material Body: PP / Hook part: Aluminum

The hook, which carries a large load, is made of aluminum, which has excellent durability and corrosion resistance.
The 6mm extra-thick aluminum hook holds firmly in various environments such as the beach or your balcony.
It is also the strongest against corrosion from seawater.
Furthermore, it is a ``strong'' hanger with a wide base of the arm.
The double effect of concave (grooves) and air bunts (holes) that allow moisture to escape improves quick drying!

【please note】
*When removing, be careful not to pinch your fingers.
*For wet suits only. Please do not use it for any other purpose.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

These boxer shorts are a type of seamless boxer that is different from regular cotton briefs, and have almost no seams, minimizing the unevenness of the seams and providing an ultimate fit to the body.
It's OK to wear as underwear, but it's also recommended as an inner layer for wetsuits and board shorts.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it. It has excellent elasticity and water repellency, so please use it as innerwear for wetsuits and board shorts.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin.

The main body and waist elastic are integrated, and the smooth texture will make you addicted to wearing it.
There is an outdoor logo on the front part of the waist.
It is highly elastic and fits gently to the contours of your body.
It's easy to cut corners when it comes to underwear, but with a glimpse of logos and printed designs,
Perfectly stylish! This is a recommended item that is perfect as a gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams in the fabric, minimizing unevenness and providing an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
The underwear has been recognized for its diverse and high-quality designs that are on par with daypacks.
It has become a popular item of the brand.
The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*For hygiene reasons, we do not accept returns or exchanges of clothing that is worn directly on the skin.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it. It has excellent elasticity and water repellency, so please use it as innerwear for wetsuits and board shorts.

What are seamless boxer shorts?

These boxer shorts have no seams and minimize unevenness at the seams for an ultimate fit to the body.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Please note that underwear is a delicate item and cannot be returned or exchanged.

The main body and waist elastic are integrated, and the smooth texture will make you addicted to wearing it.
There is an outdoor logo on the front part of the waist.
It is highly elastic and fits gently to the contours of your body.
It's easy to cut corners when it comes to underwear, but with a glimpse of logos and printed designs,
Perfectly stylish! This is a recommended item that is perfect as a gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams and minimize unevenness at the seams for an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
The underwear has been recognized for its diverse and high-quality designs that are on par with daypacks.
It has become a popular item of the brand.
The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin. Please be aware of this before placing your order.

The body and elastic waistband are one piece, and once you try them on you'll be hooked on the smooth texture of the fabric.
The outdoor logo is printed on the front of the waist.
It is highly elastic and gently fits the contours of your body.
Underwear is something we tend to skimp on, but with the logo and print design that peeks out, it's super stylish! It's also a recommended item that makes a great gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams in the fabric, minimizing unevenness and providing the ultimate fit to the body.

Outdoor Products was founded in Los Angeles, USA in 1973.
Thanks to their good design and reasonable price, the daypacks have become an iconic item of the brand, popular with a wide range of people around the world, regardless of gender or age.
The underwear line was also recognized for its diverse and high-quality designs, which were comparable to those of the daypacks.
It has become a popular item for the brand.
The playful designs and wide range of colors are fun to look at.

Material: 70% polyester
20% nylon
Polyurethane 10%

■Waist size: M size 75-80cm
Large size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of clothing that is worn directly against the skin.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

●Main jet for CV cab and CDCV cab.

●Even if you drop it in water, it will float, which is very convenient.
●Please use according to your wrist size.
[Compatible] YAMAHA

[Float color] x [Lanyard color]
A8153 Yellow x Black
A8158 Red x Black
A8141 Purple x Green
A8139 Blue x Black

BSJ-5920RSII is a waist-type inflatable life jacket suitable for entry-level models.
This is the thinnest shape of the BLUESTORM waist series.
By reducing the area that touches your body, you can stay cool in the summer and wear it for long periods of time.
In addition, rod work is comfortable and long-term action is stress-free.
Obtained type A approval from the Ministry of Land, Infrastructure, Transport and Tourism (Sakura mark)

Material: Polyester 420D

This product is [automatic inflation type].

[Product specifications]
■Inflatable life jacket (with water sensing function)
■Automatic inflation standard model
■Ministry of Land, Infrastructure, Transport and Tourism model approval number: No. 5606 (model name: TK-5920RS type)
■Classification: TYPE A
■Product weight: 430g
■Initial buoyancy: approx. 9.0kg
■Waist size: Waist circumference 130cm or less
■Product that complies with the Ministry of Land, Infrastructure, Transport and Tourism's new type approval standards
■Wearable range: Waist circumference 70-100cm
■Safe and secure MADE IN JAPAN

*Replacement cylinder kit [Order number 40839] 2,750-

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

【correspondence】
KAWASAKI

This is a Velcro type wristband lanyard.
The tether cord has a whistle attached.

[Band color] x [Lanyard color]
A2109PFW Black x Black
A2103PFW Black x Red
A2107PFW Black x Blue
A2101PFW Black x Green

【correspondence】
KAWASAKI

It is very convenient because it floats even if dropped in water.
Please use according to your wrist size.

[Float color] x [Lanyard color]
A2126 Black x Silver
A2148 Red x Black
A2151 Blue x Silver
A2149 Green x Black

Wristband

Of course, it can be used as a replacement band when the company's wristband lanyard deteriorates.
Also useful as a list float type option.
Since it is a Velcro type, it can be adjusted freely.

This is a marking buoy that is ideal for setting up courses for marine sports.
It can also be used as an anchor marker.

■Diameter: Approx. 20-25cm

[Note] Air injection nozzle is not included.

*Please purchase the air injection nozzle (part number: 97560) separately.
*The product will be shipped deflated.

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Small
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Small: 9.9 to 40 horsepower outboard motor

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor