Collection: bestseller

●Bottom paint for pleasure boats and fishing boats with improved work efficiency WAKOECO Plus [cuprous oxide compound type] 4kg

●The product has evolved into ``WAKOECO Plus,'' which has significantly improved barnacle resistance than the previous ``WAKOECOα.'' Ideal for barnacle control in highly polluted areas and on ships with low operation.

●Seawater is decomposed by a weak electric current generated by special ceramics, forming an anion barrier. The repellent effect is generated by the repulsion between carboxyl (anion) on the cell surface of bacteria and the anion barrier.

●The anion barrier allows antifouling ingredients containing cations to be drawn out naturally and evenly to the surface. Cuprous oxide, which has become cationized by the infiltration of seawater, is attracted to anions.

●One of the problems with existing ship bottom paints is that the antifouling ingredients flow into the ocean while the paint is melting. With our unique antifouling system, we have succeeded in reducing paint elution by approximately 20% compared to conventional hydrolyzable paints without reducing the antifouling effect.

*Due to the material of the product, there may be some dents on the can. We apologize for any inconvenience, but we cannot accept any complaints other than liquid leakage.

[Painting method]
1. The ingredients will settle at the bottom of the can, so mix thoroughly with an electric mixer etc. before painting.
If painting takes a long time, please stir 2 to 3 times during the painting process.

2. Please dilute the thinner within 5%.

3. Please keep the amount of paint applied according to the bottom area of ​​the ship.

4. Please carefully observe the submersion replacement time.

ST-089-42 Chain brake (U bolt size 42×100mm)
ST-089-47 Chain brake (U bolt size 47×100mm)
ST-089-52 Chain brake (U bolt size 52 x 100mm)

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

●Trailer side waterproof connector

[Compatible models]
●SRX-CD-1318
Stock engine recommended for SEA-DOO RXT (2008-2009)
Stock engine recommended for SEA-DOO GTX LTD (2005-2008)
Stock engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1419
Limited engine recommendation for SEA-DOO RXT-X (2008)
Limited engine recommended for SEA-DOO RXP (2004-2007)
Recommended limited engine for SEA-DOO RXT (2008-2009)
Limited engine recommendation for SEA-DOO GTX LTD (2005-2008)
Limited engine recommended for SEA-DOO WAKE215 (2007-2008)

●SRX-CD-1520
Recommended modified engine for SEA-DOO RXT (2008-2009)
SEA-DOO RXP (2004-2007) modified engine recommended
Recommended modified engine for SEA-DOO GTX LTD (2005-2008)
Recommended modified engine for SEA-DOO WAKE215 (2007-2008)

■Series: CONCORD
■Pitch size: 13/18・14/19・15/20
■4 blades
■Applicable pump diameter: 159mm
■Material: Stainless steel
■Product contents: Impeller, impeller seal (aluminum SLA012)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Wide type: Uses LEDs with a wide irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.
[Example: ZERO500S: 2 Ф13 holes required on the trailer frame]

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ----------------------------

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHT08: Outer diameter 8× 8× 8mm/Inner diameter 5× 5× 5mm
NHT10: Outer diameter 10 x 10 x 10 mm / Inner diameter 7 x 7 x 7 mm
NHT12: Outer diameter 12×12×12mm/Inner diameter 10×10×10mm

【please】
When ordering, please let us know the trailer model and installation location.

■Lineup
SRX-016-B1 For side frame
SRX-016-B2 for tongs
SRX-016-B3 Wide

*10 inch wide tires are
It can be mounted vertically to the side frame using the wide (SRX-016-B3) bracket.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX '19-/GP1800

Adjustable sponsons.

The base plate is made from machined aluminum.

Available in 3 colors

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRE0806: Outer diameter 6 x 8mm/Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm/Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm/Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14 mm / Inner diameter 8 x 10 mm

[Nekopos shipping products]
*Credit card payment or advance transfer only *Date and time cannot be specified *For cash on delivery, shipping fee is 800 yen/Hokkaido/Okinawa 1,500 yen (excluding tax)
*Other products ordered at the same time are not eligible for free shipping.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRT1008: Outer diameter 8×10×10mm/Inner diameter 5×7×7mm
NHRT1210: Outer diameter 10 x 12 x 12 mm / Inner diameter 7 x 8 x 8 mm
NHRT1412: Outer diameter 12 x 14 x 14 mm / Inner diameter 8 x 10 x 10 mm

[Compatibility] For SEA-DOO(08-09) RXP-X / RXT-X

[1] SE-027018 STD standard handlebar (Φ22.4)
[2] SE-027018F FAT fat handlebar (Φ28.6)

steering system.

●This is a steering mount system designed with an image that emphasizes the letter X.
●Compared to other companies' products, the strength of the front cowl mounting stay is increased by billet and welding.
●Also, the surface is buffed and anodized to give you a high-dimensional stylish look.

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

Tether for YAMAHA

[Compatible with] SEA-DOO (04-) 4TEC

[1] SE-027016 STD standard handlebar (Φ22.4)
[2] SE-027016F FAT fat handlebar (Φ28.6)

It's a steering system
A cool design with a 4TEC image.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHY08: Outer diameter 8× 8× 8mm/Inner diameter 5×5×5mm
NHY10: Outer diameter 10×10×10mm/Inner diameter 7×7×7mm

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

T type
It is made of aluminum and has a plated finish, giving a stylish look to the water area.
The pipe body is also very compact.

■Number: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: different diameter (outer diameter 9.5mm/6.3mm, inner diameter 7.7mm/5mm)
3/8 x 3/8 x 3/8: Same diameter (outer diameter 9.5 mm, inner diameter 7.7 mm)

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRC0806: Outer diameter 6×8mm/Inner diameter 4×5mm
NHRC1008: Outer diameter 8×10mm/Inner diameter 5×7mm
NHRC1210: Outer diameter 10 x 12 mm / Inner diameter 7 x 8 mm
NHRC1412: Outer diameter 12 x 14mm/Inner diameter 8 x 10mm

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

-A kit that allows you to change the 2-wheel launcher to a 4-wheel type.

*However, cannot be installed on "J-130SX Single Compact" *Processing work such as length cutting is required.

*Please note that the types differ depending on the model.
★JL222: J-130/J-1300/J-1300X *J-130SX cannot be installed ★JL223: J-1480/J1480X

[Product information]
●To prevent scratches and damage, only single items can be shipped and cannot be bundled with other products. ●Cash on delivery or combined packaging is not possible as they are shipped directly from the manufacturer.

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

color plug cap
●Quantity: 1 piece

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-7110 110
006-7115 115
006-7120 120
006-7125 125
006-7128 128
006-7130 130
006-7132 132
006-7135 135
006-7138 138
006-7140 140
006-7142 142
006-7145 145
006-7148 148
006-7150 150
006-7152 152
006-7155 155
006-7158 158
006-7160 160
006-7162 162
006-7165 165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fitting used when removing the carburetor choke shaft

[For KEIHIN]
006-538 Primer inlet
006-539 Blind Cap

This is a cap that is attached when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap