Collection: bestseller

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

color plug cap
●Quantity: 1 piece

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-7110 110
006-7115 115
006-7120 120
006-7125 125
006-7128 128
006-7130 130
006-7132 132
006-7135 135
006-7138 138
006-7140 140
006-7142 142
006-7145 145
006-7148 148
006-7150 150
006-7152 152
006-7155 155
006-7158 158
006-7160 160
006-7162 162
006-7165 165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fitting used when removing the carburetor choke shaft

[For KEIHIN]
006-538 Primer inlet
006-539 Blind Cap

This is a cap that is attached when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

[Applicable] MIKUNI SBN carburetor
006-438 For SBN38mm
006-444 For SBN44mm
006-446 For SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetor.
●KIT contents: Shaft, butterfly, E-clip, seal, bushing, nylon washer

Cheaper than genuine parts! !

sea ​​doo shaft carbon ring
[003-110-01] For drive shaft 22mm shaft
●Genuine product number: 272000177
2006-2008 1503 GTI All Models 7
2008 1503 GTX 155
2002-2005 1503 GTX 4-Tec All Models
2006 1503 GTX STD., SC, Wake

-------------
[003-110-02] For drive shaft 27mm shaft
●Genuine product number: 271001420
2008 1503 GTX 215 7
2006 1503 GTX LTD.
2007 1503 GTX LTD. BVIC / Wake BVIC

■Medium type
■With 3/4 flange
■Size: Total length 130mm x outer diameter 30mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

●Grip that does not require bonding and is very popular in America.
●It is a type that does not use adhesive for installation and is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

The material used blocks over 99% of harmful UV rays, and the slightly thin fabric is soft, stretchy, and fits snugly to the body, making it extremely comfortable to wear.
Rash guards are an essential item that not only protects children's skin from harmful UV rays, but also protects them from abrasions, jellyfish, etc.
You can also coordinate the entire outfit with the hats, rash guards, and shoes sold in the same series.

■ Rush pants
The stretchy body-fitting material is not stiff and provides excellent athletic performance.
Recommended for water play such as swimming in pools, sea bathing, and baby swimming.
The fabric is a little thicker (80 oz) than regular rash guards, making it more durable. The inside front and crotch area are made of soft, fine inner mesh to prevent chafing. The longer length helps prevent injuries and sunburn on your thighs.

[Material] 88% nylon, 12% polyurethane

[Size] 100cm.120cm.140cm.150cm

*Accessories worn by the child models for image photos are not included.
*As this is a special offer item, returns and exchanges are not accepted.

In the unlikely event that you fall into the water, it is equipped with a rescue belt behind the neck for easy lifting and a belt around the legs to prevent your body from falling out.

■ Suitable height size S: 110-130cm
M:120-140cm
L:130-150cm

*Accessories worn by models for image shoots are not included.

[Caution] Not applicable to legal equipment for small boats. This product is a swimming aid. Please use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

Swimming in the sea, playing in the river, swimming pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boats, yachts, kayaks
SUP Paddle Board Canoe Snorkeling Trekking Life Jacket Life Vest Girls Elementary School Swimming

These boxer shorts are a type of seamless boxer that is different from regular cotton briefs, and have almost no seams, minimizing the unevenness of the seams and providing an ultimate fit to the body.
It's OK to wear as underwear, but it's also recommended as an inner layer for wetsuits and board shorts.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
Underwear is also recognized for its diverse and high-quality designs, comparable to daypacks, and has become a popular item of the brand. The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*Due to hygiene considerations, we do not accept returns or exchanges of underwear that is worn directly against the skin.

Since it is foldable and open/close, just put the hanger inside the suit from the neck part while it is folded.
The thickness of the hanger creates space inside the suit, allowing for better ventilation and faster drying.
It also has a structure that speeds up drying of wet clothes without leaving hanger marks.

Easy operation and smooth attachment/detachment. Easy one-touch maneuverability with a focus on "ease of use" allows for smooth attachment/detachment even when the neck entry is wet.

■Domestic products

■Material Body: PP / Hook part: Aluminum

The hook, which carries a large load, is made of aluminum, which has excellent durability and corrosion resistance.
The 6mm extra-thick aluminum hook holds firmly in various environments such as the beach or your balcony.
It is also the strongest against corrosion from seawater.
Furthermore, it is a ``strong'' hanger with a wide base of the arm.
The double effect of concave (grooves) and air bunts (holes) that allow moisture to escape improves quick drying!

【please note】
*When removing, be careful not to pinch your fingers.
*For wet suits only. Please do not use it for any other purpose.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

The main body and waist elastic are integrated, and the smooth texture will make you addicted to wearing it.
There is an outdoor logo on the front part of the waist.
It is highly elastic and fits gently to the contours of your body.
It's easy to cut corners when it comes to underwear, but with a glimpse of logos and printed designs,
Perfectly stylish! This is a recommended item that is perfect as a gift!

It has excellent elasticity and water repellency, so it can also be used as innerwear for wetsuits and board shorts.

■What are seamless boxer shorts?

These boxer shorts have no seams in the fabric, minimizing unevenness and providing an ultimate fit to the body.

"Outdoor Products" was born in Los Angeles, USA in 1973.
Due to its good design and reasonable price, daypacks are sought after by a wide range of people around the world, regardless of gender or age, and have become the brand's iconic item.
The underwear has been recognized for its diverse and high-quality designs that are on par with daypacks.
It has become a popular item of the brand.
The playful design and wide variety of colors make it fun just to look at it.

■Material 70% polyester
20% nylon
Polyurethane 10%

■Waist size M size 75-80cm
L size 80-85cm

*For hygiene reasons, we do not accept returns or exchanges of clothing that is worn directly on the skin.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

●Main jet for CV cab and CDCV cab.

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

【correspondence】
KAWASAKI

It is very convenient because it floats even if dropped in water.
Please use according to your wrist size.

[Float color] x [Lanyard color]
A2126 Black x Silver
A2148 Red x Black
A2151 Blue x Silver
A2149 Green x Black

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

[Product specifications]
■New standard compliant model/TYPE: A
■Applicable weight: 40kg or more. For both pediatric and pediatric use
■Initial buoyancy: 7.5kg
■ Waist circumference: up to 105cm
■Material: (Body) Polyester, (Buoyancy material) Oil-resistant foamed polyethylene

This is a fixed type life jacket that provides absolute security.
Since it is worn like a vest, it won't come off easily in the event you fall into the water.
The front side is a zipper type.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

A jacket with a simple and universal design that uses a polyester body liner as the outer material.
The body also has a texture similar to a thin down jacket.

This item shows JETPILOT's attention to detail in detail, such as the left and right front welt pockets with zips and the contrasting design of the hoodie straps.

Although it is simple, it is a useful item as the main outerwear for styling.

■Actual size when laid flat (chest measurement/length)

M size: 120cm/62cm
L size: 125cm/64cm
XL size: 129cm: 67cm

*Please forgive any errors as the measurements are taken by our staff.

This is Annieversary model apparel with the original logo revived.
The brushed lining makes it a little looser, and the fabric isn't too thick, so it's perfect from fall to spring!
Round neck trainers with a simple design are popular among people of all ages.

■Poly/cotton outer body 320gsm fleece brushed lining type

■Actual product size (chest measurement/length)

S: 95cm/70cm
M:100cm/72cm
L:106cm/74cm
XL:116cm/77cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.

*American size, one size larger than Japanese size.

[As this is a special price item, we cannot accept returns or exchanges. ]

This is a multi-use waterproof backpack made by Dry Case in the United States.
3 Rolling system with extremely high performance, even in bad weather such as water spray, mud, sea breeze, rain and fog
It firmly protects the clothes and equipment you put inside.

In addition, we use environmentally friendly materials that are resistant to tears and sharpness.
Even if it gets dirty, you can easily remove it by wiping it with a wet cloth.

●Size: 69 x 40 x gusset 18cm (capacity 30L)

The size is large enough to hold bath towels, footwear, and other small items.

Stable shoulder straps and waist belt allow you to use both hands.
It also comes with a sturdy rubber strap, so you can hold it in your hand.
It also has plenty of storage specifications, including a zippered mesh pocket on the front and side pockets on the left and right.
It also provides full support for your back or lower back.

This cloth mask uses 100% cotton for the outer material and 100% quick-drying polyester fabric for the lining.
There is a pocket inside the main body that can be used to insert non-woven fabrics, gauze, etc.

●Masks do not completely prevent infection (virus invasion).
●Non-medical use, non-dust-proof/gas-proof use

【Product Specifications】
■Set of 2 ■Outer fabric: 100% cotton
■Lining fabric: 100% polyester
■Ear hook part: 100% cotton
■Size: L (Men's) W22cm x H15cm (mask part)
*This is the size listed in the catalog and may differ from the actual size.

Based on the impressions of our professional riders, we thoroughly analyzed the rider's movements and repeatedly tested the optimal cut pattern. This is the ideal wetsuit that effectively uses highly elastic materials. You will surely be able to experience the highest quality and high potential of UNLIMITED.
The side cuts give the body shape a clean look and also have an excellent design.

-UNLIMITED RUSH-
Aiming for higher performance, the design is focused on specifications that maximize the power, speed, and stability of PWCs, under the supervision of UNLIMITED's exclusive professional riders. The ultimate wear that allows riders to embody a smart look that is in line with the times.

【Features】
・Shoulder Velcro: The Velcro on the left shoulder of the long john allows for smooth putting on and taking off. ・Stabilizing pad: The pad on the knee area helps improve grip while riding. ・2.5mm flex neoprene: The new material is an evolution of the conventional fabric and has the highest level of texture and elasticity.
- Ink pad: Flexible and lightweight, with improved grip - Ankle zipper: Velcro tape with zipper for easy on and off to protect the slider

[Freely mix and match] Separately sold set-up product: EXPEDITION COAT - Marine coat - (product number UWC2240BK)
・RUSH WET JACKET (product number UWA2230BK)
・RUSH WET PANTS (Product number UWP2220)
Can be worn in combination with the above items.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.