Collection: trailer parts

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] is white logo
*Large size [ULT131-L] has red logo

Trailer Parts Boat Trailer Lashing Belt

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

●Can be installed on tongue frames up to 75 x 75 mm.
●Galvanized finish.
●Inner dimensions: Length 520 x Width 300 x Height 71mm.

*Please contact us regarding delivery dates for back-ordered items.

■Compatible with: Spare tire for SUNTREX ■Tire size: 145/80R12-6PR
■Wheel size: 12×3.5 100 4H +35

■Material: Steel plating

■Size [Ball diameter / Housing width / Maximum towing weight]
TC-05: 1-7/8 inch / 62.5mm / approx. 907kg
TC-06: 1-7/8 inch / 75.0mm / approx. 907kg

[Caution] The plating may peel off or be scratched during transportation.

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 75mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Steel plating
[Stainless steel type (product number: TC-03SUSP)]

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

Trailer frame compatible with 50mm width
*Displayed size may vary depending on individual items.
*If there is any wobble even after tightening sufficiently, please prepare a separate spacer.

●Made of stainless steel with the highest durability and corrosion resistance.
●Stainless steel polished mirror finish emphasizes stylishness.

[Product specifications]
■Ball diameter: 2 inch compatible
■Mounting frame width: 50mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Stainless steel mirror finish
*There is also a product compatible with 75mm trailer frame. [Product number TC-03SUSP]

Hydraulic inertia brake for disc brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For drum brakes, product number ST-148-01

For drum brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For disc brakes, part number ST-148-02

●Product size: 95×45×10mm
●Mounting hole pitch: 39mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●Sold in units of 1 piece ●For Solex 13 inch

●A hub and bolt set.
●4 holes PCD100 ●Offset +40
●Hub diameter: 64mm
●Bearings and oil seals are not included.
*Bearing kit part number: SRX-ST-006

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

SOREX genuine parts combination lamp

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Sales unit: 1 piece (2 pieces required when replacing left and right)
■Sold only in black
■Size: L845×W265mm
■For 10 inch wide tires

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・The shipping fee is [shipping fee x quantity] for each item.

●Set price includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

●Price includes shipping and includes axle hub, hub nut, cotter pin, and bearing kit.

●Shaft size 50X50mm

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Ordered products]

●For 1 wheel
●Leaf spring for NF-2K.

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*For back-ordered items, cancellations, changes, and returns are not possible after order confirmation (delivery date information)

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
ZERO series, S50G/N, 193SL, TWIN JT SW, 14FWG-FWB, 14FW-GW, 15FW-GW, 16FW, 17FW,
AT-500, NF-2

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

This is a [order item].

●For 1 wheel
[Please let us know the model and year from the compatible trailers below]
(S35B, S35G, 14FB/FG, NF-1/E, MB, LC150R, LF200, CAMPY〈K4〉, KC250/250K/350K)

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

●Sold in units of 1 piece ●For Solex 12 inch

For ST-004 and ST-021 hubs.

Size: W1/2-20

For PWC/black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

for boat MB

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[set content]
Bow tower, winch stand, bow roller, end cap, bolt, nut

For boat black

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

For boats and galvanizers

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

●Sold in units of 1 piece

●Inner diameter: 49.5mm
●Outer diameter: 50.8mm
●From the entrance tip to the brim: 7mm

●Size: 170×50×45mm
●Mounting pitch: 225 x 52mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

This is a made-to-order product.

[Request when ordering]------------------------------------------ -------
The following items are required for product ordering:
When placing your order, please enter the following information in the Requests/Comments section:
Trailer model name
● Trailer year
●Stamp number (trailer) The number stamped on the front.
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←
---------------------- ---------------------------- -------------------

■ Sales unit: 1 piece (2 pieces required for left and right replacement)
■Only available in black
■Size: L845×W185mm
■For 12-inch tires

[Requests and precautions when ordering]---------------------------------------- ----------
The following items are required for product ordering:
Please fill in the following information in the request/remarks section when placing your order.
Model name
● Trailer year
●Stamp number (the number stamped on the front of the trailer.)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
・Shipping charges will be provided per unit (shipping charge x quantity).

[Ordered products]

■Adaptation: For wooden banks
■Size: 60×45×45

■Sales unit: 1 piece

■Compatibility: SW, 1150 series
■Please be sure to indicate the trailer model when ordering.
*If you are considering using this product on a model other than those listed above, please refer to the image that shows the size of the mounting part.
*In this case, we cannot confirm compatibility even if the model is presented at the time of ordering.
*Also, if you wish to arrange the product after confirming the image, please write in the notes section when ordering, ``I have confirmed the image, but would like to arrange the product without confirming the model.''

●One 13-inch wheel.
●Set includes inner and outer bearings, oil seals, and adjuster washers.

●A hub and bolt set.
●13 inch wheels for wide tires
●5 holes PCD114.3 ●Offset +0

[Requests and notes when ordering]
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

■Set contents: stay, license lamp, rivet

[Please note] Riveters are required for installation.

●Lamp size: 102 x 51 x 28mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●For trailer installation. Comes with bolts. *Type with mounting holes on both left and right sides.

■Size: 156mm on one side
■Left and right screw pitch: 110mm

[Compatible with] 12 inches
[Contents] 1 wheel
(Inner, outer bearing, oil seal, adjuster washer)

●A hub and bolt set.
●12-inch wheels for wide tires
●5 holes PCD114.3 ●Offset +0

[Requests and notes when ordering]
*Shape and price may vary depending on the car model.
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 75mm compatible (inner dimensions: width 76mm x height 50mm)
■Material: Steel plating

*The following products are also available for external customers.
[Product number: Ball diameter/mounting frame width]
TC-03 2 inches/75mm

■BOX size: 463 x 252 x 385mm (approx. 37L)
■FRP
■Accessories: Mounting bolt (stainless steel), key

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

This is a relay kit for both 12V and 24V that can respond to problems with the towing vehicle's lights when connecting a trailer.

*We may not be able to respond depending on the type of towed vehicle or the condition.

【please note】
・This product does not come with connection terminals or extension wiring. Please prepare connection terminals, wiring, etc. separately.
- When extending the wiring, be sure to use a wire that is 0.75 square millimeters or larger.

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

[Kit contents]

2 steel banks for SOREX, 4 mounting brackets ●Drilling is required for installation.

[Request when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name ●Trailer year ●Stamp number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Items are 1 piece.

[Payment] Advance transfer/card payment only

●Foldable, large diameter hole.

■Wheel size: 8 inches (20.3cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 679kg
■Stroke: mm