Collection: trailer parts

■Trailer side 7-pin type wiring socket for lights

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

[Material] Stainless steel

●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)

■Bolt size AxBxC: 80x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

You can easily load and unload the important parts of the trailer, such as the axles and electrical components, without submerging them in water. The newly designed mount part for Lopros uses resin parts to improve operability when sliding, and is lightweight and compact, allowing for a wide variety of customization combinations.

After the rear ladder is stored, the rear part is secured with a pin for safety.

■Common for light and Lopros ■Made of steel ■Designed exclusively for Max trailers

【please note】
■Cannot be installed on 2-boat and regular cars.
■Adjustment may be required for wood rail specifications.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping fee is for each item.

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

●By adding "stop" to "hang" on the hook part, it is possible to prevent the hook from falling when it is fixed, making it easier and more secure to tie down.

●Belt width: 25mm, Fixed side belt length: 300mm, Winding side belt length: 3,200mm

[The base part has been changed to black]

●Aluminum wheels and handles have grill nipples, so regular lubrication will ensure smooth operation.
●The tires are made of soft rubber and can be moved more quietly.
●Can be removed from the wheel and replaced. [Product number: 0702-01 Replacement tire base]

[Product number: 0702-00]
■Foldable type
■With stopper

■Material: Aluminum
■Maximum load: 360kg
■Stroke: 280mm
■Wheel diameter: 150mm

■1 set for left and right [for one car]
■U bolt and parking brake set

Resin pin for absorber

●2 pieces set
●Material: ABS + stainless steel (core)
●TIGHT JAPAN genuine

ADEL It is designed exclusively for ADEL trailers, so it cannot be installed on other vehicle models.

■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-60 Galfender 1 wheel *Stays, bolts, etc. are not included.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

225 tire + wheel set
●Sold in units of 1 piece
●PCD114.3 5H 7J (5 holes)

0501-06 Black wheels

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■Made of stainless steel ■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

●Color: Black

●Width: 50mm Belt length: 5,000mm

●By adding a multi-strap function to the hook part, it reduces damage to the hull and can be easily fixed to PWCs where hooks are difficult to pass through, improving functionality.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Ordered products]

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 50mm compatible
■Maximum towing weight: Class 2, 1570kg
■Material: Steel Viper color

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

●You can add hooks to trailers and trucks that do not have side hooks and hang fixed hooks such as tie-down belts.

●Clamp width up to 45mm.

●Steel PVC coating

●The handle is symmetrically designed and can be attached to either side.
●The length can be adjusted to 15, 18, 20, and 23cm.
●Die-cast housing type that is resistant to corrosion.
●The drum can be switched between forward rotation, reverse rotation, and free rotation.
[Note] It cannot be used for vertical lifting.

■Material: [Shell] Aluminum, [Drive part] Steel
■Maximum towing load: 906kg / 2000LBS
■Strap length: 20FT (approx. 6m)
■Size: Width 140x Total length 270x Height 205mm
■Installation surface size: width 85x length 160mm
■Self weight: Approximately 5kg

●Shaft diameter: 7mm, effective length: 20mm
●Steel chrome plating
●The protective rubber at the center reduces noise caused by vibrations while driving.
●It can be used not only as a trailer coupler but also as a door lock for cargo boxes, warehouses, etc. depending on your ideas.
●The key opens quickly with a 1/4 turn. The rubber cap and O-ring prevent dust and water from entering the key cylinder.
*[Product number: 30391] If used in conjunction with a trailer lock, you will have double peace of mind.

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 200mm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel (galvanized finish)
■Maximum load: 679kg
■Stroke: 250mm
■Wheel diameter: Approximately 20cm
■Material of tire part: Made of resin

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

●Tight Japan MAX TRAILER 7-pole harness connector (for EX).
●The wiring is in a call shape, making it very easy to use.
●The wiring is made longer than 0106-07.
■Material: Aluminum

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

■Compatibility: Can be installed on frames up to 75 x 75 mm.
■Size External dimensions: 214 x 410.2 x 166mm
■Compatible with all Suntrex trailers.
Galvanized finish.

【please note】
*Please contact us for delivery dates as this is a back-ordered item.

For ST-004 and ST-021 hubs.

Size: W1/2-20

■Sales unit: 1 piece

■Compatibility: SW, 1150 series
■Please be sure to indicate the trailer model when ordering.
*If you are considering using this product on a model other than those listed above, please refer to the image that shows the size of the mounting part.
*In this case, we cannot confirm compatibility even if the model is presented at the time of ordering.
*Also, if you wish to arrange the product after confirming the image, please write in the notes section when ordering, ``I have confirmed the image, but would like to arrange the product without confirming the model.''

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

■6-core electrical wiring
■Please use it for wiring hitch members, etc.
■Type: 6 poles
■Total length: 2m

●Bolt diameter size: M10

●A hub and bolt set.
●4 holes PCD100 ●Offset +40
●Hub diameter: 64mm
●Bearings and oil seals are not included.
*Bearing kit part number: SRX-ST-006

[Requests and notes when ordering]
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

■ Sales unit: 1 piece (2 pieces required for left and right replacement)
■Only available in black
■Size: L845×W185mm
■For 12-inch tires

[Requests and precautions when ordering]---------------------------------------- ----------
The following items are required for product ordering:
Please fill in the following information in the request/remarks section when placing your order.
Model name
● Trailer year
●Stamp number (the number stamped on the front of the trailer.)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
・Shipping charges will be provided per unit (shipping charge x quantity).

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
-------------------------------------------------- ------------------------------

■Size: Total length 235mm x Φ80mm
Shaft diameter: 16.0mm

■Material: Steel ■Accessories: Chain & electrode connector holder included [Place of use] Attached to the triangular gathering part or coupler part, mainly used for two-boat configurations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

Product name: Wiring for wiring kit (single item)
Product number: SRX-006-H

This is a single item for wiring and relay connector for towing vehicle side lights .
*Wiring socket is not included.

■Wiring ■Connection tap x 6 pieces

Product name: Extension tongs 2
Product number: SRX-020-L

Length 1870mm

*You cannot drive on public roads or drive with it attached.
*It cannot be installed depending on the trailer model. Please contact us.
*Please let us know the trailer model when ordering.

Product name: Dust cap with rubber cap (1 piece)
Product number: ST-042-G

For hubs with 2 inch inner diameter

*Please let us know the trailer model when ordering.

Product name: Advanced step fender (white)
Product number: ST-123-W

Advanced step fender white (1 piece/side)

The stylish design features steps on the front and back that are convenient for maintenance, allowing you to make your presence known.

*Advanced step fender is black with white paint.
*Please let us know the trailer model when ordering.
*Cannot be installed depending on the trailer model.
Please contact us.

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: 1500LBS winch with cover Product number: SRX-133

A combination lamp that combines water resistance and visibility.

●Lamp size: 255 x 110 x 65 mm
Mounting hole pitch: 225 x 52 mm
●Look at the trailer from behind and choose left or right.
● (Sold in units of 1

★Water-resistant★
It is designed to withstand water from above, such as rain or car washing.
Please be careful not to submerge the light part in water, such as by putting the trailer underwater. Water may get inside the lamp and cause it to break.

Right: SX00-10 (ST-012)
Left: SX00-20 (ST-012)

ST-089-42 Chain brake (U bolt size 42×100mm)
ST-089-47 Chain brake (U bolt size 47×100mm)
ST-089-52 Chain brake (U bolt size 52 x 100mm)

[Ordered products]

■Wooden bank ■Total length: 1,850mm