Collection: trailer parts

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■This stay is for attaching the 7-pole connector of the hitch member.

■Material: Steel

■Plate thickness: 1.2mm
*Plate only (screws etc. are not included)

■Size details are listed in the image

It lights up in conjunction with the small light, improving the visibility of following vehicles.

●Sold in units of 1 piece.
●Size: 1 side 160mm

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece

■M10 75x45 square long bolt for pipe

■Bolt size AxBxC: 150x63xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■1 piece
■Nut only

12×1.25p
Socket size: 21mm

■M8 50x50 square pipe bolt

■Bolt size AxBxC: 70x63xφ8

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe horizontal bolt

■Bolt size AxBxC: 70x97xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x88xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 110x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x83xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 97x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 97x100xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x60xφ12

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x60xφ12

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

[Ordered products]

■Roller width: 220mm
■Bracket dimensions: 195x120x168mm (width x height x depth)
■Material: Steel

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

●For adjustable tower (75x45) ●When moving the trailer, use the carry handle for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when in a low position!

■Material: Steel ■Includes: Reinforcement stay, chain wire & electrode connector holder included.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

●For adjustable tower (75x45)
●When moving the trailer, the carry handle allows for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when sitting in a low position!

■Material: Stainless steel
■Includes: Reinforcement stay, chain wire & electrode connector holder included.

●When moving a trailer, it eliminates the inconvenience of not having a place to hold it or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Stainless steel

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

For W-MAX

●Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
- Also useful for pushing, pulling, and lifting operations. It can be moved easily like a wheelbarrow, and can be connected to a car smoothly.

■Material: Steel
■Can be installed in two directions: front and back

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

■Material: Stainless steel
■Includes: Chain & electrode connector holder included
[Place of use] Attached to the triangular gathering part or coupler part, mainly used for 2-boat loading.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

■Material: Stainless steel ■Attachments: Chain & electrode connector holder included [Usage location] Attached to the triangular gathering part or coupler part, mainly used for 2-boat installations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

For 2 inch coupler, total length 2m

This is an extension coupler for when you cannot go to the water's edge. *You cannot drive with the coupler extend installed. *For Max trailer only.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

You can easily load and unload the important parts of the trailer, such as the axles and electrical components, without submerging them in water. The newly designed mount part for Lopros uses resin parts to improve operability when sliding, and is lightweight and compact, allowing for a wide variety of customization combinations.

After the rear ladder is stored, the rear part is secured with a pin for safety.

■Common for light and Lopros ■Made of steel ■Designed exclusively for Max trailers

【please note】
■Cannot be installed on 2-boat and regular cars.
■Adjustment may be required for wood rail specifications.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping fee is for each item.

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

●For fixing in places with no tightening allowance or in narrow places.
●Since there is no hook, lashing around the perimeter is very convenient.

●Width 25mm x length 1,455mm

■Material: Stainless steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items".

■Material: Steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items"

●Loading the beach stand on a trailer reduces dirt and scratches inside the vehicle.

●It is also possible to install the separately sold side storage box (product number: 0704-21, 0704-22) [see image below].

<set content>
Main body, U bolts (4 50x50mm, 2 75x50mm), transom tie down, universal hook

■Size: Height 760 x Width 360 x Depth 315mm

■Material: Stainless steel
■Sales unit: 1 piece

[For small cars with wire brake only]

●Size A:490 B:750 C:985 D:50-150 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●Size A:490 B:680 C:830 D:125 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●A retractable stand bar to prevent falls and damage to the license plate when washing the car without connecting the trailer to the car or maintaining the jet.

●Equipped with rubber that prevents rattling and chattering noises when running, making it extremely quiet.

■Material: Steel plating
■Mounting plate and bolt set included
*Maximum 50cm

Tire & base only *The base part has been changed to black.

■For TIGHTJAPAN stopper jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, stroke amount: 280mm

Genuine parts for MAX trailers.

■1 set of 2 ■Material: Steel ■Compatibility: Common for regular cars and light cars

■Quantity: 1 piece
■Seal inner diameter: 31mm
25φ, 28φ: For light vehicles

■ Quantity: 1 piece
■For shaft Φ35

*Please prepare your vehicle inspection certificate and measure the dimensions of your hub before contacting us. We may use it for the inner or outer hub.
.

*Hub seal is sold separately [part number 0605-10].

■1 set for left and right [for one car]
■U bolt and parking brake set

■Quantity: 1 piece
■For shaft Φ25

*For hub seals, please prepare your vehicle inspection certificate, etc., and then contact us after measuring the actual product you have.
Please let us know if you are using it for innerwear or outerwear.

*Hub seal is sold separately [Part number 0605-01].