Collection: Hitch member parts (vehicle side)

hitch ball cover

■Applicable ball size 1-7/8 inch / 2 inch common

A4135 red
A4134 Yellow
A4136 Blue
A4133 black

Made of PU (polyurethane) material, it is soft to the touch.
Protects from accidents such as shin guards.
hitch ball cover

■Material: PU material
■Correspondence:
Ball size 1-7/8 inch / 2 inch common

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

●Shaft diameter: 7mm, effective length: 20mm
●Steel chrome plating
●The protective rubber at the center reduces noise caused by vibrations while driving.
●It can be used not only as a trailer coupler but also as a door lock for cargo boxes, warehouses, etc. depending on your ideas.
●The key opens quickly with a 1/4 turn. The rubber cap and O-ring prevent dust and water from entering the key cylinder.
*[Product number: 30391] If used in conjunction with a trailer lock, you will have double peace of mind.

It can be used by simply attaching it to the hitch ball.
The visual impact is also outstanding! !

This is a ball cover that is sure to stand out due to its large size.
*Please note that this may interfere with opening and closing the rear gate on some models of vehicles such as minivans.

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Product name: Wiring for wiring kit (single item)
Product number: SRX-006-H

This is a single item for wiring and relay connector for towing vehicle side lights .
*Wiring socket is not included.

■Wiring ■Connection tap x 6 pieces

SOREX ZERO trailer sticker
■Size: 1000x50mm
■Sold in units of 1 piece

STKS15-ZERO17-B Black 1 piece
STKS15-ZERO17-W White 1 piece

SOREX trailer sticker
■Size: 510×51mm
■Color selection, sold in units of one piece

STK001-BLA
STK001-REA

●Trailer side waterproof connector

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Hitch cover for 50mm square type that is fixed with a ball mount key.

●A hitch cover with a variety of designs that you can enjoy dressing up.

●Compatible with a wide range of tight hitches (for 50mm square type) as well as other companies' products (for 50mm square type).

■Spout type: 50x50mm square
■Material: Made of ABS
*Please check the plug type. [50Ф round type is also available. ]

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●A member cover exclusively for tight hitches that is secured with a ball mount key.

●The tail member part is emphasized more stylishly.

■ Socket type: 50φ round
■Material: Made of ABS
*Please check the plug type. [50x50mm square type is also available. ]

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-type long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■ 0 (mm)

Plate thickness 2.0mm
Plate only (screws etc. are not included)

[1][2] are L type
[3] is a straight type (straight without bending).

For 5 tons

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit wiring bracket is not included.

This is a ball mount removable hitch bracket for Toyota Land Cruiser 70/80 series, Nissan Safari, Mitsubishi Pajero (excluding V78 and later), Isuzumyu, Jeep, etc. that have mounting holes in the rear frame or bumper.

■Bolt hole pitch = height: 45mm width: 85mm
■Standard ball mount (bottom) height: -123mm from the bottom of the mounting bolt

*A copy of your vehicle inspection certificate is required when ordering.
*Wiring kit and wiring bracket are not included.

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm x 85mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

This is a relay kit for both 12V and 24V that can respond to problems with the towing vehicle's lights when connecting a trailer.

*We may not be able to respond depending on the type of towed vehicle or the condition.

【please note】
・This product does not come with connection terminals or extension wiring. Please prepare connection terminals, wiring, etc. separately.
- When extending the wiring, be sure to use a wire that is 0.75 square millimeters or larger.

●O-ring for SOREX ball mount (SRX-082, SRX-123).
●O-ring to prevent ball mount from rattling.
[Quantity] 2 pieces 1 set

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

[Product specifications]
■Material: Steel

■Compatibility: American class 3, mount lock pin diameter: 16mm

■Corner type width: 2 inches *There may be slight individual differences in the width size.

■Maximum traction force: 1575-2000kg

■Hitch ball shaft diameter: 25mm

■Drop: 6 inches

■Size: Please refer to size chart 4.
(Please use this as a guide as there are individual differences)

[Product specifications]

■Material: Steel

■Compatibility: American class 3, mount lock pin diameter: 16mm

■Corner type width: 2 inches *There may be slight individual differences in the width size.

■Maximum traction force: 1575-2000kg

■Hitch ball shaft diameter: 25mm

■Drop: 4 inches

■Size: Please refer to size chart 3.
(Please use this as a guide as there are individual differences)

[Product specifications]

■Material: Steel

■Compatibility: American class 3, mount lock pin diameter: 16mm

■Corner type width: 2 inches *There are slight individual differences in the width size.

■Maximum traction force: 1575-2000kg

■Hitch ball shaft diameter: 25mm

■Drop: 3 inches

■Size: Please refer to size chart 2.
(Please use this as a guide as there are individual differences)

[Product specifications]

■Material: Steel

■Compatibility: American class 3, mount lock pin diameter: 16mm

■Corner type width: 2 inches *There are slight individual differences in the width size.

■Maximum traction force: 1575-2000kg

■Hitch ball shaft diameter: 25mm

■Drop: 2 inches

■Size: Please refer to size chart 1.
(Please use this as a guide as there are individual differences)

[Product specifications]

■Material: Steel

■Compatibility: American class 3, mount lock pin diameter: 16mm

■Corner type width: 2 inches *There are slight individual differences in the width size.

■Maximum traction force: 1575-2000kg

■Hitch ball shaft diameter: 25mm

■Drop: 8 inches

■Size: Please refer to size chart 5.
(Please use this as a guide as there are individual differences)

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

[Quantity] 2 pieces
This is a pin blind seal.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *