Collection: Hitch member parts (vehicle side)

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

[Quantity] 2 pieces
This is a pin blind seal.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there may be size errors due to individual differences.

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Lock pin for ball mount

■Made of steel plating

■TIGHT JAPAN, SUNTREX, SOREX, class 3 compatible

■Size: Ф16x75mm

[Reason for outlet sale]
●Due to the nature of the product, there may be some rattling. (See photo)
●This is a new product that can be used without any problems, but please refrain from purchasing if you are concerned about the appearance.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
*We cannot answer inquiries about product specifications even if you only refer to the information listed.

[Product Specifications]
■Material: Steel ■Compatible with: American Class 3, Mount lock pin diameter: 16mm
■Square type Width: 50mm Square type ■Maximum traction force: 1575-2000kg
Hitch ball shaft diameter: 25mm
■Drop: 2 inches■Size: Please refer to image number 4.
(Please note that there may be individual differences, so please use this as a guide only.)

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■As it is made of stainless steel, it is a rust-resistant item.

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

2” hitch ball pin included. For 6 tons.

■Material: ALL made of stainless steel.

●Dimensions: Mounting surface dimensions: Width 112x Height 75mm
Mounting bolt pitch: Width 85x Height 45mm
Mounting bolt hole diameter 12.6mm

2” hitch ball and pin included. For 1.5ton.
■Material: Made of steel.

■Dimensions: Mounting surface dimensions: Width 112x Height 75mm
Mounting bolt pitch: Width 85x Height 45mm
Mounting bolt hole diameter 12.6mm

■6-core electrical wiring set
■Please use it for wiring hitch members, etc.

【set content】
6-pole wiring 2m x 1
Single line 2m x 1
Interrupt terminal x 6

■6-core electrical wiring
■Please use it for trailer wiring, etc.
■Type: 6 poles
■Total length: 10m

●Compatible with: Ball mount class 2, class 3
●Contents: Head body, 2 replaceable bars (1 each with pin sizes Ф13mm x 65mm and Ф16mm x 65mm)
●Rubber cover cap specification.
●Made of steel plating

Master Lock 2866DAT

■5/8” axis
■Compatibility: Class III

Things you want to store somewhere like car keys and valuables at the beach.
That's where this Receiver Lock Key Safe comes in!
・・・・・・
Valuables such as keys and cards can be stored in a sturdy box.
The lock is a method of selecting 4 numbers.
Indispensable for beaches and other active lifestyles.
・・・・・・
Master Lock 1467DAT

■7-pin type wiring socket for lights on the towing vehicle side

■Material: Aluminum die-cast

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■This stay is for attaching the 7-pole connector of the hitch member.

■Material: Steel

■Plate thickness: 1.2mm
*Plate only (screws etc. are not included)

■Size details are listed in the image

■It is a mount cap for the hitch member mount socket.

■Fix to the mount cap with a receiver lock (1/2" 12.7mm) pin.

■Material is plastic with chrome plating finish to create a stylish hitch member.

■Compatibility: Class II (Square type, inner diameter 32 x 32 mm compatible)

■Material: Plastic (chrome plated)

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

●This is a special bag to store when the ball mount is removed.
●Does not make the interior of the car dirty, and you do not have to worry about where to put it.
●Cushion material is sandwiched between the fabrics.

[Disclaimer]
*The ball mount and hitch ball in the image are not included.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Since it uses an L-shaped cylinder, it is easy to attach and detach at the center of the hitch member, which tends to be narrow.

■Pin diameter: 16mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan

■Material: Stainless steel (SUS304)
■Ball size: 50mm
■Shaft diameter: 25mm

When setting it in the connector, ensure that it is installed on the screw to prevent non-electricity.

[Quantity] 6 pieces 1 set

When setting it in the connector, ensure that it is installed on the screw to prevent non-electricity.

[Quantity] 6 pieces 1 set