Collection: Boating Supplies

[Product specifications]
■Material: Stainless steel
■Size: width 340 x height 235 x depth 76mm
■Holder inner diameter: 42φ
...
■Mounting screws are not included.

●Pliers, knives, fishing tackle, etc. can be stored in the center of the frame, and lures can be stored in the small hole in the front.
●A resin cover is built into the inside that houses the rod to prevent it from being scratched, and there is a drainage hole on the bottom.

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size
Hinge part: 29 x 76mm
Key holder base: 41 x 29mm

-Hinge set with keys (2 included).
-Uses 316 stainless steel material that is resistant to rust and corrosion.

●The float type switch for the bilge pump is now equipped with a guard to prevent malfunction due to dirt, etc.

●When the water level is high, the float floats and conducts, and when the water level drops, it automatically disconnects.

●With lever for operation text

●Compatible with bilge pumps with DC12 to 32V and up to 20Amp.

-Base size 64x133mm, total height 73mm

[Product specifications]
■Body dimensions: 200x85x55mm
■Weight: 795g
■Cord length: 1.8m for both input and output
■Applicable battery: DC 12V lead battery ■Input power source: AC 100V, 50/60hz
■Output: 14.8V, 2.5A
■Pulse output: 22,000 to 28,000Hz
■Equipped with an LED lamp display function that shows the status of the battery during charging and whether recovery and charging are possible.
■Electrical Appliance and Material Safety Act / PSE compliant product ■Accessories: Main unit, alligator clamp, flat round terminal (the alligator clamp and flat round terminal can be used interchangeably depending on the shape of the battery terminal), safety instruction manual, instruction manual Book and warranty

●This is a battery charger that simultaneously removes sulfation, which causes battery deterioration, and charges the battery.

●Refreshes batteries that have deteriorated over many years of use, restores their original performance, and extends the lifespan of batteries that you may have given up on because they have reached the end of their lifespan. (Depending on the condition of the battery that can no longer be charged, it may not be possible to play it.)

●If you continue to use a new battery, it will prevent battery deterioration and extend the battery's original lifespan.

【please note】
Batteries that have been used for a long period of time or that have been discarded as garbage may have significant damage to the electrode plates inside the battery due to deterioration due to charging and discharging cycles. This device restores battery function by removing substances attached to the battery's electrode plates, but cannot restore damage such as falling off or deterioration of the electrode plates themselves. The most effective regeneration target with this device is the sulfation removal effect on relatively new batteries such as agricultural machinery, automobiles, motorcycles, and boats that are not used frequently.
...
In actual use, this device will not automatically stop after transitioning to pulse charging.
There is no need to worry about overcharging, so you can pulse as long as time allows.
Sulfation removal will be completed in approximately 72 hours, so please use this time as a guide even after normal charging.
(Reference: Normal charging takes about 2 to 10 hours, then shifts to pulse charging, and maintenance is complete after 72 hours have passed.)

[Product specifications]
■Type: Wall-mounted type
■Material:
Body: polypropylene
Fixings: stainless steel
■Size: Total length 305mm
■Holder inner diameter: 45φ

...
■Stainless steel fixture included

●Anemometer with built-in electronic compass and display functions for average wind speed, maximum wind speed, and temperature.
●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.
●Direction display supports angle display (0 to 360 degrees) and compass point display (north, south, east, and west).
●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.
- Comes with a strap that is convenient for hanging around the neck
●The main body has a screw hole for fixing it to a tripod, so it is possible to take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Built-in electronic compass, wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Uses a removable key type that is effective in preventing tampering. Prevents mischief and malfunction.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating to ensure reliable wiring!
●The ring sticker that indicates the switch position uses a luminescent label. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

■The MINI battery switch is ideal for outboard boats and boats equipped with small diesel engines.
■Battery switch that supplies two systems from two batteries. [Switch position] The following four positions are available.
1. Battery 1 → Connect/cut off the power to the two devices.
2. Battery 2 → Connect/cut off the power to the two devices.
3. Battery 1 + 2 → Connect/cut off the power to the two devices.
4. Shut off all batteries 1+2.

[Product use]
●Continuous withstand current: 300Amp
●Momentary withstand current: 1500Amp (2.5 seconds)
●Maximum voltage: 48V
●Size: 68.9x68.9mm
●Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●Highly conductive copper is used for the connection terminal, and the corrosion-resistant tin plating coating ensures reliable wiring!
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

[Product specifications]
■Material
Body: Aluminum
Roller: vinyl chloride
■Size: Width 140x Depth 69x Height 71mm

A roller that smoothes the movement of ropes and chains when raising and lowering the anchor, and also prevents damage to the hull.
It has rollers in the horizontal and vertical directions, so it can be raised and lowered stably and smoothly even if the rope swings from side to side.
Weather resistance has been strengthened by adding titanium to AC7A aluminum, which is resistant to corrosion and rust.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

When used, it eliminates the rear center of gravity when a single person is on a small boat, accelerates the transition to a planing state, and enables stable running.
This is an extension bar that can be attached to the throttle section of an outboard motor or electric motor when the handle is short and difficult to maneuver.

[Installation] Just place it over the grip and tighten the knob! No tools required. Easy to put on and take off.
*If the handle diameter is too small, please adjust it with the included rubber plate.

【Product details】
■Applicability: Ideal for Japanese boats, U-type boats, and fishing boats.
■Material:
→Body: Aluminum
→Other parts: Plastic
■Compatible with: Grip outer diameter: 36-54Φmm
■Telescopic 620-1020mm steplessly adjustable
■With curl cord for extension of kill switch

【please note】
The longer the handle, the worse the turning angle of the handle, so please be careful when maneuvering the boat.

Since it is intended for use with a low horsepower outboard motor, there is a risk of damage if used with a high horsepower outboard motor.
Avoid using outboard motors with more than 15 horsepower.

●Not only can it be used to defog glass windows, but it can also be used as a pinpoint heater for your hands and face.

●A louver is attached to the air outlet, allowing you to adjust the direction of the airflow from left to right, and the main unit can be rotated 180 degrees vertically.

●With cigarette lighter plug (cord length: approx. 1m)

●Size: Width approx. 195x Height approx. 100x Depth approx. 70mm

●DC 12V only/output 120W

●Air volume and temperature are about the same level as warm air (weak) from a portable hair dryer.

*[Note] ON/OFF switch is not included. Turn on/off by inserting and removing the plug.

●Anemometer with display function of wind speed, average wind speed, and maximum wind speed.

●It is a simple and easy-to-operate model with only the most frequently used wind speed display for Wind Mate 200 (product number: 24065) and Sky Mate.

●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.

●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.

- Comes with a strap that is convenient for hanging around the neck

●The main body has a screw hole for fixing it to a tripod, so you can take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

●A battery switch that supplies two systems from two batteries; the switch position is from battery 1 to connect/cut off power to two devices. Battery 2 → Connect/cut off power to two devices. Battery 1+2 → Connect/cut off power to two devices. All batteries 1+2 are cut off. It has 4 ways.

●The e-series is ideal for boats equipped with small to medium-sized diesel engines.

●Manufactured by BLUE SEA, which boasts a top market share in the United States for electrical wiring parts related to RVs and boats, and is recommended by many builders.

●Continuous withstand current: 350Amp

●Momentary withstand current: 1750Amp (2.5 seconds)

●Maximum voltage: 48V

●Size: 97.8×97.8mm

●Terminal stud: 9.5mm

◆◆◆Main features◆◆◆

●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.

●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.

●You can tell that the knob is firmly in each position by a firm "click" response.

●There are two installation methods. Compatible with wall mounting and stationary mounting methods.

[Application] For stubborn stains such as black spots on exhaust ports.
[Applications] FRP, metal, painted surfaces
[How to use] Wait for a while after spraying, then rinse with a hose.

Removes especially stubborn dirt that floats to the waterline during navigation.
Can be used on FRP, metal, and painted surfaces. It is also effective for removing black stains from exhaust ports.
●Capacity: 650ml

[Application] Removal of rust, stains, and oil stains
[Applications] FRP, metal, painted surfaces
[Type] Environmentally friendly biodegradable cleaner

Removes rust, stains, and oil stains without scrubbing.
For particularly dirty areas, please use Strake Cleaner (Part No. 23624).

●Capacity: 946ml

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×200m.

*[Product number 23521] 15m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ10×200m.

*[Product number 23520] 12m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×15m

*[Product number 23522] 200m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ10×12m.

●An air vent and O-ring set exclusively for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●Aluminum cap exclusively for stainless steel cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●This is a set of bellows nozzle and gasket for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

Nozzle spout (tip) dimensions:
Inner diameter: approx. 19-20mm
Outer diameter: approx. 22-23 mm
Pipe length: 24cm

*AB-10 / AB-10F / AB-20 / AB-20F
Repair parts for stainless steel portable containers

●Drilling size: 24.3φmm
-Flange size: 55 x 36.7mm
●Screw hole: φ5mm
- Distance between screws and centers: Approx. 41mm

*Main body only, mounting screws etc. are not included.

[Product specifications]
■Type: Pipe mounting type
■Material: Plastic
■Size: Total length 295mm
■Holder inner diameter: 43φ
■Pipe diameter that can be installed: 19 to 25φ (mm)
...
■Can be fixed at any 360 degree angle

●Movable type with 360° angle adjustment
●Reasonable rod holder for pipe installation made of resin.
●By fixing the bracket to the pipe and tightening the bolt that fixes the rod holder and bracket at any position.
Fix the rod holder at the most convenient angle.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 39mm
■Effective length of hose insertion part: 34mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 30mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Quantity: 2 pieces
■Material: Nylon
■Body size: L88 x W43 x H22mm
■Compatible with: Ropes up to 10mm diameter
■Mounting hole size: 5mm

This is a very convenient fixture that allows you to easily secure ropes with one hand.
You can easily fix the rope by simply passing the rope through it alternately without tying it.
It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

Once secured, the rope will not come off even if strong tension is applied.
When removing it, you can easily remove it by removing the ropes passed through it alternately.

[About the product]
This product cannot be specified as the color may vary depending on the arrival time. Please note.

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 52 x Width 52 x Height 32 x Wire diameter 8 x Ring inner diameter 40mm

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 42 x Width 42 x Height 25 x Wire diameter 6 x Ring inner diameter 35mm

Handrails (handrails, safety bars) that can be installed anywhere, including on boats.
Made of stainless steel (SUS304), it is rust resistant and highly durable.
The mounting flange is of the covered type, so it looks neat. The surface has a mirror finish.
To install, securely fasten in three places on each side with tapping screws, and click the covers on each side to complete.

[Product specifications]
■Material: Stainless steel (SUS 304) Mirror finish ■Accessories: Tapping screws x 6, PC plugs x 6

This is the most common and versatile dunn horse anchor for pleasure boats.
It is a stainless steel material with a beautiful mirror finish on the surface and excellent rust resistance.

■Suitable areas for use: Effective on bottom sediments such as sand, mud, and sludge, especially effective on sandy soils.
■Recommended boat size: 6-7m (20-22f)
■Material: Stainless steel (mirror finish)
■Anchor rope diameter guide (mm): 10-12mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Shipping fee will be charged for each item as one small lot.

This is the most common and versatile dunn horse anchor for pleasure boats.
It is a stainless steel material with a beautiful mirror finish on the surface and excellent rust resistance.

■Suitable areas for use: Effective on bottom sediments such as sand, mud, and sludge, especially effective on sandy soils.
■Recommended boat size: 4-6m (14-19f)
■Material: Stainless steel (mirror finish)
■Anchor rope diameter guide (mm): 9-10mm

[Shipping information] Due to the shape of the product, it cannot be bundled with other products.

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Adaptation: Hole diameter 31φ

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Applicable: Hole diameter 25φ

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mm

The lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

[Product specifications]
■Suitable areas for use: Effective on bottoms such as mud, sludge, stones, rocks, and reefs, and is effective on relatively hard bottoms.
■Recommended boat size: 4-6m (14-19f)

■Material: Iron + melt galvanized processing
■Anchor rope guide (mm): 9-10mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Shipping fee will be charged for up to 2 items.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

■Suitable areas for use Effective on bottom sediments such as mud, sludge, stones, rocky areas, and reefs, and is suitable for relatively hard bottom substrates.
■Recommended boat size: Less than 3-4m (10-13f)
■Material: Iron + melt galvanized processing

■Anchor rope guide (mm): 8-9mm (rope sold separately)

[Shipping information] Due to the shape of the product, it cannot be bundled with other products.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

■Suitable areas for use Effective on bottom sediments such as mud, sludge, stones, rocky areas, and reefs, and is suitable for relatively hard bottom substrates.
■Recommended boat size: Less than 3m (9f or less)
■Material: Iron + melt galvanized processing

■Anchor rope guide (mm): 7-8mm

[Information regarding delivery]
・Due to the product shape, it cannot be bundled with other products.