Collection: Boating Supplies

essential cleaning kit

Foam gun and detergent set!

◆Set contents
・Form Gun Pro (SV-FG01) x 1
・JETRENU Purple 473ml (JR-1001) x 1

◆Product details
[Form Gun Pro]
- Ideal for cleaning cars, motorcycles, jet skis, windows, etc.
・Creates super foam that is effective against stubborn stains,
Maximizes the cleaning power of the cleaning solution.
・Highly foamed foam envelops dirt and dust during cleaning,
It gently washes your car without causing any scratches.
・By connecting directly to a normal hose adapter and spraying,
You can easily clean it at home as well as on the go.
■Equipped with 2-way easy switching function: super foam and water cleaning
■Tank capacity: 240ml

[Jet Renew Purple]
First landing in Japan! This is a series of cleaning items specifically for personal watercraft and PWCs, born in California. Different colors have different uses to keep the hull beautiful. It can be used not only for personal watercraft, but also for cars, boats, motorcycles, etc.
This product (purple) is a basic cleaning and waxing product. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, creates a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season. You can also use it to take care of your car or bicycle. If you are using the series for the first time, please purchase this.

【how to use】
Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. When using a foam gun, dilute it to your desired ratio (e.g. 2 parts water: 1 part detergent).
It is a rich foaming detergent that is highly recommended to be diluted and used with a foam gun. It also has a strong, pleasant scent typical of American products. From the moment you open the package, you can feel the gorgeous scent. This is a product that is understandably popular in its home country.

【Notes】
1. Please keep out of reach of children. 2. Please use gloves, mask, goggles, etc. to protect your body. 3.If swallowed, drink a glass of water and seek medical attention immediately. 4. If it gets into your eyes, immediately rinse with plenty of water. 5. If it comes in contact with your skin, wash it off immediately.

Just by attaching it, you can see the anchoring position at a glance, and it also helps prevent the rope from getting entangled.
Please use as a set with rescue anchor rope.
Funny characters that make you laugh are popular.
If you use it in layers, it will attract even more attention!
There is also a namespace (name field) to avoid mistakes.
■Size: Approximately 25 x 25cm (individual sizes vary)

【be careful】
If the rope is not made by TIGHTJAPAN, the marker may not be stable.
*The rope in the image is sold separately.

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
It can be used not only for jet skis, but also for boats, motorcycles, etc.
This product (purple) is a basic cleaning and waxing product.
A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, creates a glossy finish, and provides long-lasting UV protection.
If you are using the series for the first time, please purchase this.

It is a rich foaming detergent that is highly recommended to be diluted and used with a foam gun. It also has a strong, pleasant scent typical of American products. From the moment you open the package, you can feel the gorgeous scent. This is a product that is understandably popular in its home country.

[Contents] 1 gallon
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2018 or later) / SPARK(※)
*'18 -'20 RXP-X / '18-20: Not compatible with all GTI, GTR / '16-'17 SD models.
*Please use 30 for 4-stroke models up to 2015.

【compatibility】
■Yuasa:
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB, YB16BCX,
GT16L-BS, GT16BS, CTX19-BS CTX19L-BS , GYZ20H, GYZ20L, GYZ20HL,YTX20L-BS,YB16CL-B
■DEKA: ETX16, ETX16L, ETX20, ETX20L
■ODYSSEY: PC535, PC625

【Product Specifications】
MBTX20U
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 310 A
■Capacity (10HR) 21 Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

First landing in Japan! A series of cleaning items exclusively for personal watercraft and PWCs born in California.
Different colors have different uses to keep the hull beautiful.
It can be used not only for personal watercraft, but also for cars, boats, motorcycles, etc.
This product (purple) is a basic cleaning and waxing product.
A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, creates a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.
You can also use it to take care of your car or bicycle.
If you are using the series for the first time, please purchase this.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection

[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

It is a rich foaming detergent that is highly recommended to be diluted and used with a foam gun.
It also has a strong, pleasant scent typical of American products.
From the moment you open the package, you can feel the gorgeous scent.
This product is understandably popular in its home country.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! This is a cleaning item series made in California that specializes in jet skis. The Professional Series is a professional item that is particularly effective among JETRENU items. A 3-step care will give your body a smooth and beautiful finish. The gloss and shine after finishing is different!

■ C1 ALL IN ONE COMPOUND & POLISH
This is the first step in a professional series for restoring the beauty of ship hull surfaces.
Gently corrects scratches, oxidation marks, and defects. It is more effective to use a set of C2 (polish) and C3 (wax) for finishing.
[How to use] After cleaning and drying the hull, apply with a damp cloth or sponge, allow to dry slightly, then wipe off with a dry microfiber towel.

■ C2 GEL COAT (473ml)
This is the second step in the professional series that restores the beauty of ship hull surfaces. It is best used as a polish after gently correcting scratches, oxidation marks, and defects with C1 ALL IN ONE from the same series. It does not use abrasives and protects the hull surface from the sun's ultraviolet rays while increasing its gloss. It is more effective when used with C3 (wax).
[How to use] Apply with a damp cloth or sponge, dry slightly, and then wipe with a dry microfiber towel.

■ C3 SEALER WAX
This is the third step in the professional series that restores the beauty of ship hull surfaces. Provides durable protection for painted or gel-coated surfaces. Nano- and amino-functional polymers combined with Brazilian carnauba wax prevent deterioration from UV rays and seawater, creating a glossy, mirror-like finish for long-lasting protection.
It is more effective if used after gently correcting scratches, oxidation marks, and defects with C1 ALL IN ONE from the same series, and applying shine with C2 GEL COAT.

[How to use] Apply with a damp cloth or sponge, dry slightly, and then wipe with a dry microfiber towel.

[Precautions] 1. Please keep out of reach of children. 2. Please use gloves, mask, goggles, etc. to protect your body. 3.Avoid using in a closed room and use in a well-ventilated place. 4. If swallowed, drink a glass of water and seek medical attention immediately. 5. If it gets into your eyes, immediately rinse with plenty of water. 6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
JET RENU protectors protect vinyl, plastics, tires, gel coats, dashboards, seats, rubber hoses, and stainless steel from cracking and fading caused by UV rays.

[Applications] Vinyl, plastic, tires, gel coat, dashboard, seats, rubber hoses, stainless steel
[Effect] Protection from cracking and fading caused by UV rays

【how to use】
Spray directly on the area you want to protect and let the product soak in.
Wipe off excess liquid if necessary.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

Please select your desired prefecture type.

●JCI compatible products (small ship court equipment)
●Contents: 1 set of 2 pieces ●Size: Width approx. 100 x Height approx. 80mm

●This is a mark buoy that is ideal for setting up courses for water skiing, wakeboarding, and personal watercraft.

■Diameter: Approximately 50cm

【please note】
Air injection nozzle is not included.
*Please purchase the hand pump (model number: 97520) separately.
*It will be delivered with the air removed.

●Can also be used as a fender for slalom buoys and personal watercraft.

●This is a buoy manufactured by Polyform that has an eye on one side only.

●Size: 15×39cm

【please note】
Air injection nozzle is not included.

[Product specifications]
■Material: Plastic
■Size: 76φ×127mm
■Hole diameter: 12mm

●Small and lightweight type makes it convenient to move!
●You can also set up a course or float ropes, etc.

First landing in Japan! Jet ski cleaning item series born in America
Anti-fog is now available from JET RENU!
The cool, American-style package design that you don't often see on Japanese products is eye-catching. It is a popular brand in the United States for its cleaning items specializing in water motorsports.

Maintain clear vision during activities.
Please use it to prevent fogging of windshields, face visors such as helmets, goggles, sunglasses, etc.

[Contents] 118ml
[How to use] Spray on areas where you want to prevent fogging, such as goggle lenses, windshields, and helmet face visors, blend well with hands, and then wipe with a soft cloth.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

Effective for use in sandy areas, it is held in place by the weight of the anchor rather than hooked onto the ocean floor (river bottom).
This anchor is easy to handle and has a PVC coating on its surface to prevent scratches and rust on the hull.

[Product specifications]
■Weight: 5kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ18cm x body height approximately 21cm (including shackle)

*Please check the tightness of the shackle before each use.
*If it is loose, it may come off, so be sure to tighten it before use.

[Please note] As this is an overseas product, the PVC coating may vary depending on the product.
[About delivery] Due to the shape of the product, some products cannot be shipped together.

It is effective for use in sandy areas, and is held in place by the weight of the anchor itself rather than being hooked to the ocean floor (river bottom).
The surface is coated with PVC, making it an easy-to-handle anchor that prevents scratches and rust on the hull.

[Product specifications]
■Weight: 3kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ15cm x body height approximately 17cm (excluding shackle)

【please note】
*Please check the tightness of the shackle before each use.
*If it is loose, please be sure to tighten it before use as it may cause it to come off. *As this is an overseas manufactured item, there may be unevenness in the PVC coating.

[Shipping information] Combining other products is not possible.

●A fast rope made of spun ester yarn with excellent weather resistance and durability.

●It is characterized by not easily floating in water and not becoming hard even after long periods of use.

●Both ends are heat treated to prevent fraying.

●It is a three-pronged rope.

●8φ×10m

[Compatible models]
SEA-DOO 4-stroke (up to '15)
*Cannot be used with SPARK

■Since this is an instant-use battery, it can be used after injecting the electrolyte and leaving it for about 30 minutes.
■When using in low temperatures or if the product has not been used for a long period of time, please charge it for 1 to 2 hours before use.
*You can use it for a longer period of time by regularly maintaining it so that it does not drop below 12.3V.

■Calcium battery liquid refill type■Size: Width 170 x Length 130 x Height 195mm

■Voltage: 12V ■10-hour capacity: 30Ah ■Charging current: 3A
Weight: 9.31KG

■ Country of Origin: China

[Features]
Excellent self-discharge performance, long life, and starting performance
By making the electrolyte into a gel, we were able to improve the basic performance that is important for a battery.
.
●It will not leak even if it falls on its side! It is a gel battery with a cutoff function, so it will not leak even if it falls on its side .
No need to worry about leaks, etc. ●Maintenance-free
merchandise
Since the battery is shut off from the time of purchase, there is no need to inject/replenish battery fluid, so it is hassle-free.
Pay attention to the charging current.

*Initial charging time: 1 to 2 hours
*If the engine is difficult to start during cold winter temperatures or after the battery has been manufactured, charging will be necessary.

First landing in Japan! A series of cleaning items exclusively for jet skis born in California.
Different colors have different uses to keep the hull beautiful.
The Jet Renew series features a gorgeous fragrance that is typical of American-made detergents. You can enjoy a variety of scents for each product. We also recommend that you enjoy the various series of products that suit your needs.

Pink Plus is a 2-in-1 wax and limescale remover.
It has the same effect as the wax PINK (QUICK & SHINE) from the same series, and is blended with RED (WATERSPOT REMOVER).
Achieves a glossy finish while removing surface dirt.

[Contents] 473ml
[How to use] Spray directly to remove limescale stains, then polish with a soft cloth in a circular motion. Use twice on areas with severe water stains. After use, please wash this product thoroughly with shampoo.
For shampoo, we recommend PURPLE Wash and Wax from the JETRENU series.
*Do not use on aluminum or alumite processed products. It will damage the surface paint.
*Do not leave it unattended with it applied to the surface.
*Please be sure to test on an inconspicuous area before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.Avoid using in a closed room and use in a well-ventilated place.
4. If swallowed, drink a glass of water and seek medical attention immediately.
5. If it gets into your eyes, immediately rinse with plenty of water.
6. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

ON-OFF-ON 3-way rotary switch.
Two electrical components can be operated separately.
It can be used regardless of manufacturer model.
Their high quality and reliability are highly evaluated overseas.
■Produced in Japan

■Completely waterproof
■Cord length: 25cm
■Specifications: 12V 5A

[About installation] Hole drilling (Ф13.5mm) is required on the mounting part.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

[Product specifications]
■Suitable areas for use: Effective on bottoms such as mud, sludge, stones, rocks, and reefs, and is effective on relatively hard bottoms.
■Recommended boat size: 3-4m (10-13f)

■Material: Iron + molten zinc plating ■Anchor rope guide (mm): 8-9mm (rope sold separately)

[Shipping information] Due to the shape of the product, it cannot be bundled with other products.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

Please select your desired prefecture type.

●JCI compatible products (small ship court equipment)
●Contents: 1 set of 2 pieces ●Size: Width approx. 100 x Height approx. 80mm

■Advanced Plus/Special Set

[Set contents] Boat + 5 items ★ 3m inflatable boat (SV-IBA300)
・HONDA 2 horsepower outboard motor (BF2DH-SCHJ)
・HONDA Engine Oil 0.2L (08211-99959)
・Outboard motor stand (JP-HR001)
・5L plastic can (37565)
・High pressure pump (27790)

■Model without preliminary inspection■An inflatable boat that does not require a license or boat inspection if it is equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, allowing for greater speeds even with the same horsepower.
■One bench mat is included so you can decorate the aluminum bench.
*The color of the bucket in the product image is only an image, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Load capacity: 500kg
■ Overall length x overall width x tube diameter: 300 x 150 x 42 cm
■Inboard length: 182cm
■Interior width: 73cm
Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty

[Standard accessories] 7-piece aluminum oar set x 2 (pair),
Carry case,
Foot pump,
Aluminum bench (seating board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

[Notes about outboard motor stands]
*Assembly of the hull air stand is required.
*Please note that the color of the transom holder plate may vary depending on the time of arrival.

■Advanced Plus/Entry Set

[Set contents]
・3m inflatable boat (SV-IBA300)
・HONDA 2 horsepower outboard motor (BF2DH-SCHJ)
・HONDA Engine Oil 0.2L (08211-99959)
・Outboard motor stand (JP-HR001)

■Model without preliminary inspection■An inflatable boat that does not require a license or boat inspection if it is equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, allowing for greater speeds even with the same horsepower.
■One bench mat is included so you can decorate the aluminum bench.
*The color of the bucket in the product image is only an image, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Load capacity: 500kg
■ Overall length x overall width x tube diameter: 300 x 150 x 42 cm
■Inboard length: 182cm
■Interior width: 73cm
Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty

[Standard accessories] 7-piece aluminum oar set x 2 (pair),
Carry case,
Foot pump,
Aluminum bench (seating board) x 2,
Bench mat x 1,
SAVIVE original bucket,
Repair kit

[Notes about outboard motor stands]
*Assembly of the hull air stand is required.
*Please note that the color of the transom holder plate may vary depending on the time of arrival.

Very convenient for maintenance and storage of outboard motors.
When not in use, it can be folded and stored compactly.

●Material: Steel (black paint)
●Applicable horsepower: Up to 5 horsepower class of 4st outboard motor

●Size: width 540 x depth 640 x height 1000mm
●Outboard motor fixing plate dimensions: width 46 x height 11.5 x thickness 3.5cm
●Height from the top of the outboard motor fixing plate to the ground: Approximately 89.5cm
●Body weight: Approximately 6.0kg

【please note】
*This product requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

The conventional waist belt type did not provide a stable floating position and there was a risk of capsizing. Bluestorm's waist belt type has a movable part of the belt that connects the waist belt and the air chamber, allowing the air chamber to rise up to the back and create a stable floating position.

This product is [automatic inflation type].

●With a patented rail system, it is approximately 1/2 the size of conventional loincloth types, making it suitable for people with small waists and women.
This system has made it possible to store the product in a smaller size even though it has the same temperament as the previous model.

●Even though it is more compact, its buoyancy, floating performance, and expansion when falling into water are the same.
It is the most compact and lightest of the waist belt type life jackets that have obtained TYPEA certification. It reduces the burden on the wearer and allows them to continue wearing it comfortably even for long periods of time.

●Durability has been improved by combining Cordura nylon fabric with excellent abrasion resistance and tarpaulin fabric with excellent strength, and the protection of the temperamental fabric has been improved to the next level.

●A 16g carbon dioxide cylinder is used to inflate the air chamber, creating a buoyancy of over 7.5kg/24 hours (initial buoyancy approximately 9.0kg). A type that senses water and automatically inflates (manual operation is also possible).

●Adopts Halky Roberts V90000 (HR 6F) charging device with single indicator.

●If an unused cylinder is installed correctly and the indicator is green, it can be used. If the bobbin (spool) is used or incorrectly installed, the indicator will turn red. You can check the installed status and usage status of the bobbin (spool) at a glance.

[Product specifications]
■Inflatable life jacket (with water sensing function)
■[Rail system] Waist belt model
■Ministry of Land, Infrastructure, Transport and Tourism model number: No. 5560 (model name: TK-9320RS type)
■Classification: TYPE A/Life jacket for small boats
■Initial buoyancy: approx. 9.0kg
■Waist size: 70-100cm
■Replacement cylinder kit: 16HR 6F
■Weight: Approx. 470g

【 how to use 】
1. Can be inflated automatically or manually.
The rail system works equally well whether automatic or manual.

2. When activated, the end of the cover will first swell, the Velcro will come off, and it will begin to expand.

3.The air chamber inflates forward while sliding on the rail using the gas pressure from the cylinder from the side.
Life jackets use high gas pressure to inflate instantly.
*Do not attach sharp objects to the life jacket.

4. The sides are fully expanded and the back part is inflated.

Until now, life jackets could not be made smaller during the inflating process.
For this reason, inflatable life vests have remained the same size for a long time, but with the development of the rail system, it has become possible to make them smaller.
Even though the product is smaller, the floating posture and buoyancy after inflation are the same as conventional products.

●A set of 4 cans of the popular Wako Eco Plus boat bottom paint.

●Bottom paint for pleasure boats and fishing boats with improved work efficiency WAKOECO Plus [cuprous oxide compound type] 4kg

●The product has evolved into ``WAKOECO Plus,'' which has significantly improved barnacle resistance than the previous ``WAKOECOα.'' Ideal for barnacle control in highly polluted areas and on ships with low operation.

●Seawater is decomposed by a weak electric current generated by special ceramics, forming an anion barrier. The repellent effect is generated by the repulsion between carboxyl (anion) on the cell surface of bacteria and the anion barrier.

●The anion barrier allows antifouling ingredients containing cations to be drawn out naturally and evenly to the surface. Cuprous oxide, which has become cationized by the infiltration of seawater, is attracted to anions.

●One of the problems with existing ship bottom paints is that the antifouling ingredients flow into the ocean while the paint is melting. With our unique antifouling system, we have succeeded in reducing paint elution by approximately 20% compared to conventional hydrolyzable paints without reducing the antifouling effect.

*Due to the material of the product, there may be some dents on the can. We apologize for any inconvenience, but we cannot accept any complaints other than liquid leakage.

[Painting method]
1. The ingredients will settle at the bottom of the can, so mix thoroughly with an electric mixer etc. before painting.
If painting takes a long time, please stir 2 to 3 times during the painting process.

2. Please dilute the thinner within 5%.

3. Please keep the amount of paint applied according to the bottom area of ​​the ship.

4. Please carefully observe the submersion replacement time.

●Bottom paint for pleasure boats and fishing boats with improved work efficiency WAKOECO Plus [cuprous oxide compound type] 4kg

●The product has evolved into ``WAKOECO Plus,'' which has significantly improved barnacle resistance than the previous ``WAKOECOα.'' Ideal for barnacle control in highly polluted areas and on ships with low operation.

●Seawater is decomposed by a weak electric current generated by special ceramics, forming an anion barrier. The repellent effect is generated by the repulsion between carboxyl (anion) on the cell surface of bacteria and the anion barrier.

●The anion barrier allows antifouling ingredients containing cations to be drawn out naturally and evenly to the surface. Cuprous oxide, which has become cationized by the infiltration of seawater, is attracted to anions.

●One of the problems with existing ship bottom paints is that the antifouling ingredients flow into the ocean while the paint is melting. With our unique antifouling system, we have succeeded in reducing paint elution by approximately 20% compared to conventional hydrolyzable paints without reducing the antifouling effect.

*Due to the material of the product, there may be some dents on the can. We apologize for any inconvenience, but we cannot accept any complaints other than liquid leakage.

[Painting method]
1. The ingredients will settle at the bottom of the can, so mix thoroughly with an electric mixer etc. before painting.
If painting takes a long time, please stir 2 to 3 times during the painting process.

2. Please dilute the thinner within 5%.

3. Please keep the amount of paint applied according to the bottom area of ​​the ship.

4. Please carefully observe the submersion replacement time.

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

■Advance Plus/Special Set

[Set contents] Boat + 5 items ★3m inflatable boat (SV-IBA300)
・SUZUKI 2 horsepower outboard motor (DF2S)
・SUZUKI engine oil 1L (99000-22B60-4T1)
・Outboard motor stand (JP-HR001)
・5L polyester carrying can (37565)
・High pressure pump (27790)

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

[Note regarding the outboard motor stand]
*The hull air stand requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

■Advance Plus/Entry Set

【set content】
・3m inflatable boat (SV-IBA300)
・SUZUKI 2 horsepower outboard motor (DF2S)
・SUZUKI engine oil 1L (99000-22B60-4T1)
・Outboard motor stand (JP-HR001)

■Model without preliminary inspection ■Inflatable boat that requires no license or boat inspection if equipped with a 2 horsepower outboard motor.
■The transom is 50mm higher than usual, which increases speed even with the same horsepower.
■One bench mat that can be used to decorate an aluminum bench is included.
*The color of the bucket in the product image is for illustrative purposes only, so you cannot specify the color.

[Boat specifications]
■Material: PVC
■Capacity: 4 people ■Loading capacity: 500kg
■Full length x full width x tube diameter: 300 x 150 x 42cm
■Inboard length: 182cm
■Inner width: 73cm
■Total weight: 34kg
■Bottom type: High pressure air floor ■Maximum horsepower: 10HP
■1 year warranty included

[Standard accessories] 7-piece set aluminum oars x 2 (pair),
carry case,
foot pump,
Aluminum bench (seat board) x 2,
Bench mat x 1,
SAVIVE original bucket,
repair kit

[Note regarding the outboard motor stand]
*The hull air stand requires assembly.
*The plate color of the transom holder varies depending on the arrival time. Please note.

[Content capacity] 2L (Standard application area: 7 square meters)

●Self-polishing type suppresses increase in resistance and exhibits stable stain resistance.

●“SEAJET033” has been well received in the domestic market as the main product of the SEAJET series,
It is widely used as a representative paint for pleasure boats and yachts.

●This product, which brings together the technology cultivated in marine paints, is available in the domestic market, where until then only overseas products were imported and sold under license.
Its performance has been highly praised, and it has developed into a top brand product in Japan with an expanded series of products.

●Due to hydration and decomposition, the antifouling agent gradually dissolves even when moored, preventing the bottom of the boat from getting dirty.

●If the operating rate is low and the mooring period is long, SEAJET033, which has excellent static stain resistance, is the best choice.

- Also available in a chic ash color with a luxurious feel

[Precautions for use]
*Cannot be used on aluminum boats.
*Primer 015 (product number: 01499) is required when painting a new boat.
*Two coats is standard.

●SEAJET037 has significantly improved antifouling performance compared to conventional cuprous oxide-free type antifouling paints! We have developed a higher-performance paint to maintain the beautiful bottom of the ship even after it is submerged in water. In particular, the antifouling performance against adhesion of animal species such as barnacles has been greatly improved.

●Since it does not contain cuprous oxide, there is no bluing and the ship's bottom remains beautiful even after being submerged in water. It can be used not only for FRP boats but also for aluminum boats.

●An environmentally friendly paint whose activator dissolves into the sea and quickly decomposes.
●Capacity: 2L

●Hydrolyzable ship bottom paint.

Note) Cuprous oxide-free antifouling paint has a faster elution rate. Please ensure sufficient film thickness. (We recommend 100μ or more) This phenomenon is normal paint film renewal, and there is no problem with properties or performance, so please use with confidence.

[Content capacity] 2L (Standard application area: 7 square meters)

A chic ash color with a luxurious feel is now on sale.

The SEAJET series has been well received in the domestic and overseas markets since its release, and has become one of the leading paints for pleasure boats and yachts.
It is widely used as a representative product.
This product, which brings together the technology cultivated in marine paints, was highly praised for its performance in the domestic market, where up until then only overseas products had been imported and sold under license, and with the addition of a series of products, it became a top brand product in Japan. It has developed.

【Features】
The antifouling performance lasts for a long time due to the stable surface renewability of silyl resin.
The highly concentrated antifouling agent ion layer on the surface exhibits excellent antifouling power.
The self-polishing action of the paint film suppresses the increase in water flow frictional resistance.

[Precautions for use]
*Cannot be used on aluminum boats.
*Primer 015 (product number: 01499) is required when painting a new boat.
*Two coats is standard.

Clamps are mainly used on automobile and motorcycle production lines.
Made entirely of stainless steel, it has excellent corrosion resistance and durability.
Long screw design improves workability,
The liner design has a carefully calculated structure that prevents the rubber hose from protruding from the inside.
Easy to use as it is a bolt with a minus groove!
■Domestic production

■Material: Stainless steel SUS304
■Quantity: 2 pieces 1 set

Please select your desired size.
JL800610: Φ8～10mm
JL800612: Φ10~12mm

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

This is a marking buoy that is ideal for setting up courses for marine sports.
It can also be used as an anchor marker.

■Diameter: Approx. 20-25cm

[Note] Air injection nozzle is not included.

*Please purchase the air injection nozzle (part number: 97560) separately.
*The product will be shipped deflated.

BSJ-5920RSII is a waist-type inflatable life jacket suitable for entry-level models.
This is the thinnest shape of the BLUESTORM waist series.
By reducing the area that touches your body, you can stay cool in the summer and wear it for long periods of time.
In addition, rod work is comfortable and long-term action is stress-free.
Obtained type A approval from the Ministry of Land, Infrastructure, Transport and Tourism (Sakura mark)

Material: Polyester 420D

This product is [automatic inflation type].

[Product specifications]
■Inflatable life jacket (with water sensing function)
■Automatic inflation standard model
■Ministry of Land, Infrastructure, Transport and Tourism model approval number: No. 5606 (model name: TK-5920RS type)
■Classification: TYPE A
■Product weight: 430g
■Initial buoyancy: approx. 9.0kg
■Waist size: Waist circumference 130cm or less
■Product that complies with the Ministry of Land, Infrastructure, Transport and Tourism's new type approval standards
■Wearable range: Waist circumference 70-100cm
■Safe and secure MADE IN JAPAN

*Replacement cylinder kit [Order number 40839] 2,750-

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Small
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Small: 9.9 to 40 horsepower outboard motor

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.