Collection: Best Selling Products

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 11mm
■Chain inner diameter: 43 x 14mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 8mm
■Chain inner diameter: 38 x 13mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 6mm
■Chain inner diameter: 30 x 10mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

-Material: Steel (black paint)

-Mounting hole size: 13-14.8cm x 13-14.8cm

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

■Material: Stainless steel

■Size: A total length 254 x B stop hole ~ stop hole 93 x C height 68 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 203 x B stop hole ~ stop hole 71 x C height 53 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 152 x B stop hole ~ stop hole 75 x C height 45 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

■Material: Stainless steel

■Size: A total length 126 x B stop hole ~ stop hole 54 x C height 39 mm

■A cleat with 4-point fixation, ideal for areas that require strength.

■Made of stainless steel that resists rust and corrosion

[Product specifications]
■Size: Length 860 x Width 270mm
■Dial diameter: 350mm
■Terminal installation inner diameter: 19mm

■Applicable: For small batteries
■Can be used up to 800 amperes.

This is an ON/OFF switch attached to the battery terminal (negative side).
You can turn the power on/off by tightening or loosening the green knob that comes with the terminal.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

This is the long john of JETPILOT's highest grade series RX-VAULT.

The Airflow material is breathable and has 100% 360 stretch, making this wetsuit extremely maneuverable.
The removable back protector is a special piece of equipment that reduces impact.

■ 100% 360 stretch neoprene for outstanding mobility ■ Durable YKK front zip for easy on and off ■ Jet-lock seam construction for added strength ■ Seamless underarm panels reduce stress ■ Air flow panels for ventilation More comfortable by incorporating gender

Tops JA22156 (sold separately) Items that can be set up with JACKET

■Applicable image size (height, weight, chest measurement, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm
XL: 180-185cm, 77-85kg, 105-110cm, 84-88cm

A simple and natural design cap
The brim is arched.

■Free size

100% cotton is extremely comfortable to wear.

■Material: Cotton

■Product size
M: Chest measurement 100cm/total length 70cm
L: Chest measurement 109cm/total length 72cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.
*American size is one size larger than Japanese size.

[Applicable model] YAMAHA Yamaha
FX (up to 2011 model year), FZS (up to 2012 model year)
FX140 / FX160 / HO(06-11) / SHO(08-11) / Cruiser / FZS(-16)
*For FX2012 model and later (model number: Y-12 is the compatible product)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] YAMAHA Yamaha EX series

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] SEA-DOO

1 [S-2B(S-3B)] :RX/RX DI/HX
2 [S-XPB(S-6B)] :XP(97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)

*RXP-X 260 RS2012 and later are not compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] SEA-DOO

1 [S-2B(S-3B)] :RX/RX DI/HX
2 [S-XPB(S-6B)] :XP(97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)

*RXP-X 260 RS2012 and later are not compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] SEA-DOO

1 [S-2B(S-3B)] :RX/RX DI/HX
2 [S-XPB(S-6B)] :XP(97-)/XP-L
3 [S-RXP-B (S-2B)]: RXP/RXP-X 255 (*)

*RXP-X 260 RS2012 and later are not compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Adapted model] SEA-DOO
GTR230(2017-2020)
GTI 130(2011-17)
GTI SE 130(2020)
GTI SE 155(2011-13)
GTR215(2012-16)
GTR-X 230(2017-19)
WAKE 155(2011-16)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-17B black
S-17S Silver

[Adapted model] SEA-DOO

RXP-X 300(2016-2019)
RXP-X 260(2012-2015)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

S-11S Silver
S-11B Black

[Applicable model] KAWSAKI 800SXR only

*Product number "K-12" is compatible with 1500SX-R.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Handle] The handle part is also reinforced with double layers of fabric.
3. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

K-SXR Silver
K-SXR-BK Black

[Applicable model] KAWASAKI KAWASAKI STX
STX12F/STX15F
1200STX-R
STX1100DI/900STX
STX-160(2020)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

[Applicable model] KAWSAKI Kawasaki
For 4-stroke 1500SX-R (2017~) model only

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

K-12S Silver
K-12B black

[Applicable model] YAMAHA Yamaha FZR

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] YAMAHA Yamaha
XL700 / XL800 / XL1200 / XLT800 / 1200 / VN

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] YAMAHA Yamaha
GPR800 / 1200 / 1300 / ALL-GP (excluding FZS)

[! ] This is "for GPR".If you are looking for "for GP800/1200", please purchase Y-13B.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] YAMAHA GP800/1200

*For "GPR", product number: Y-2B is compatible.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part.
Domestic production from fabric to sewing, high quality

Commitment
1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

[Applicable model] SEA-DOO

WAKE PRO215(2008-09)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 200m Black x Green

●Material: Polypropylene (PP)

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 100m Black x Green

●Material: Polypropylene (PP)

We also have a good value 200m roll.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 50m Black x Green

●Material: Polypropylene (PP)

There are also 100m and 200m rolls available.

The rope has 16 strokes with fine grains and a smooth surface, making it resistant to local scratches.
Compared to 3-stroke ropes, it is more flexible and less likely to kink (kinking of the rope).
Recommended as legal equipment for small vessels.

It is used in a variety of applications because it has high strength, excellent wear resistance, and is easy to handle even with bare hands.

●Top grade 16 stroke yacht rope 8mm x 20m Black x Green

●Material: Polypropylene (PP)

■BOX size: 463 x 252 x 385mm (approx. 37L)
■FRP
■Accessories: Mounting bolt (stainless steel), key

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

[This is a made-to-order product].

●1 set left and right
●Improves trailer running stability and reduces impact on cargo by absorbing shock and vibration using hydraulic pressure.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

*Installation may not be possible depending on the vehicle model.

For SEA-DOO 4-stroke 1503 engine
●Genuine product number (OEM): 420950771

●SGS cylinder head gasket
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Applicable model] SEA-DOO

RXT-X 255(2008-09)
RXT 215(2008-09)
RXT(2005-07)
GTX-LTD(2005-08)
GTX155(2008-09)
GTI SE 130(2007-10) /GTI SE 155(2007-10)
WAKE 215(2007-08) /WAKE 155(2007-10) /WAKE(2005-06)
*WAKE can be used with the pole removed.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*This model is only available in black

[Applicable model] SEA-DOO 3D

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*This model is only available in black

[Applicable model] SEA-DOO FISH PRO155 (2019)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-16B black limited

[Applicable model] SEA-DOO
SPARK 2-up(2014-19)
SPARK 2-upTRIXX(2017-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

S-14B black
S-14S Silver

[Applicable model] KAWASAKI Kawasaki
ULTRA130 / ULTRA150

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*As this is a made-to-order item, it will take approximately one week. No returns or exchanges or cancellations

■Applicable: Engines with cylinder bores from 51mm to 177mm
■The roughness of the standard stone is 280.

●Use this honing tool to finish cylinder scratches and ridge reamers when maintaining engines used in automobiles, motorcycles, boats, cultivators, and construction machinery.
●The contact pressure of the honing stone can also be adjusted by adjusting the column.
●The angle of the stone arm can be changed by changing the position of the retaining band to match the cylinder bore.

●Towing speed: 5km/h or less (suitable for towing buggies, etc.)
●Attachments: Bolts and special spacers

【please note】
Powered towing using this coupler is not a trailer, so it cannot be towed on public roads.
Towing speed: Please strictly observe the use at 5km/h or less. (Cannot be used on uneven roads even if it is less than the value on the left)
When bouncing, the instantaneous load is 2 to 3 times the weight, which can damage parts such as the axle shaft.

We also have the "JB104SUS reinforced axle shaft kit" for heavy boats.
If you are towing with power, we recommend replacing it.