Collection: Best Selling Products

●A very convenient fixture that allows you to easily secure the rope with one hand.

●You can easily fix the rope by simply passing the rope through it alternately without tying it.

●It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

●Once fixed, the rope will not come off even if strong tension is applied.

●When removing it, you can easily remove it by removing the ropes passed through it alternately.

●Can be used with ropes up to 12mm in diameter.

●Body dimensions: 82mmx40mm
●Made of stainless steel

[Product specifications]
■Material: Stainless steel
■Size: width 340 x height 235 x depth 76mm
■Holder inner diameter: 42φ
...
■Mounting screws are not included.

●Pliers, knives, fishing tackle, etc. can be stored in the center of the frame, and lures can be stored in the small hole in the front.
●A resin cover is built into the inside that houses the rod to prevent it from being scratched, and there is a drainage hole on the bottom.

[Material] Stainless steel
[Quantity] 500 pieces
Size: width 11.5mm x foot length 6mm

Handrails (handrails, safety bars) that can be installed anywhere, including on boats.
Made of stainless steel (SUS304), it is rust resistant and highly durable.
The mounting flange is of the covered type, so it looks neat. The surface has a mirror finish.
To install, securely fasten in three places on each side with tapping screws, and click the covers on each side to complete.

[Product specifications]
■Material: Stainless steel (SUS 304) Mirror finish ■Accessories: Tapping screws x 6, PC plugs x 6

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

wrangler

[Compatible model] TJ40S/TJ40H

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] C
[Ball mount] Dedicated ball mount
[Installation difficulty]☆
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

■Gear can be changed to 2 speeds

■Can be used in forward rotation lock, reverse rotation lock, and 3 free stages.

■The handle is thicker and easier to grip.

■Gear ratio: 5:1/12:1

■Material: Steel plating

■Maximum towing load: 1100kg / 2500LBS

■Handle length: 250mm

*Body/handle only.

*Winch strap is not included.

■Sales unit: 1 piece (2 pieces required when replacing left and right)
■Sold only in black
■Size: L845×W265mm
■For 10 inch wide tires

[Requests and notes when ordering] ---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・The shipping fee is [shipping fee x quantity] for each item.

■ Sales unit: 1 piece (2 pieces required for left and right replacement)
■Only available in black
■Size: L845×W185mm
■For 12-inch tires

[Requests and precautions when ordering]---------------------------------------- ----------
The following items are required for product ordering:
Please fill in the following information in the request/remarks section when placing your order.
Model name
● Trailer year
●Stamp number (the number stamped on the front of the trailer.)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
・Shipping charges will be provided per unit (shipping charge x quantity).

carry

[Compatible model] DA16T

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

carry

[Compatible model] DA16T

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

carry

[Compatible model] DA16T

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 2WD

[Compatible model] MN71S

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 2WD

[Compatible model] MN71S

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 2WD

[Compatible model] MN71S

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB64W/74W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
*Since the car's wiring is thin, we recommend purchasing the relay kit (SRX-142) at the same time. Requires installation while avoiding the license plate
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB64W/74W

*Since the car's wiring is thin, we recommend purchasing the relay kit (SRX-142) at the same time. Requires installation while avoiding the license plate

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
*Since the car's wiring is thin, we recommend purchasing the relay kit (SRX-142) at the same time. Requires installation while avoiding the license plate
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB64W/74W

*Since the car's wiring is thin, we recommend purchasing the relay kit (SRX-142) at the same time. Requires installation while avoiding the license plate

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
*Since the car's wiring is thin, we recommend purchasing the relay kit (SRX-142) at the same time. Requires installation while avoiding the license plate
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 4WD

[Compatible model] MN71S

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 4WD

[Compatible model] MN71S

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Crosby 4WD

[Compatible model] MN71S

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Every

[Compatible models] DA17W, DA17V

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hustler

[Compatible model] DBA-MR31S/MR41S

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hustler

[Compatible model] DBA-MR31S/MR41S

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Every Wagon *PZ Turbo Special is OK if processed

[Compatible model] DA64W (V)

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Hole drilling required PZ Turbo Special is OK if processed
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

carry

[Compatible model] DA63T

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Wagon R

[Compatible model] DBA-MH22S

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB23W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB23W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB23W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo

[Compatible models] TD54W/94W, TDA/TDB4W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
There is a bumper cut about 5cm inside the license plate.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo

[Compatible models] TD54W/94W, TDA/TDB4W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
There is a bumper cut about 5cm inside the license plate.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo

[Compatible models] TD54W/94W, TDA/TDB4W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty] ☆☆
There is a bumper cut about 5cm inside the license plate.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Every Wagon

[Compatible model] DA52W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction force] A
[Ball mount] Dedicated ball mount
[Installation difficulty]☆
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Wagon R

[Compatible models] MC11/21S

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆

*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Wagon R

[Compatible model] CT/MD21/51S

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty] ☆☆
Required hole drilling
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny wide

[Compatible model] JB33/43W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
There is a possibility of muffler interference due to individual differences.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny wide

[Compatible model] JB33/43W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
There is a possibility of muffler interference due to individual differences.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny wide

[Compatible model] JB33/43W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
There is a possibility of muffler interference due to individual differences.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo *S edition Helly Hansen specification NG

[Compatible models] TA/TD/52/02W, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
S edition Helly Hansen specification NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo *S edition Helly Hansen specification NG

[Compatible models] TA/TD/52/02W, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
S edition Helly Hansen specification NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Escudo *S edition Helly Hansen specification NG

[Compatible models] TA/TD/52/02W, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
S edition Helly Hansen specification NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible model] JB32/31W JA22W

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-3
[Installation difficulty]☆

*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

jimny

[Compatible models] JA11/71V/JB31V/SJ30V

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-3
[Installation difficulty]☆

*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

●SOLAS stainless steel wear ring 159mm (SRZ/SRX)
●Higher strength and durability than normal wear rings.

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

●SOLAS stainless steel wear ring 155mm (SR)
●Higher strength and durability than normal wear rings.

[Compatible models] SEA-DOO
4-stroke / 2-stroke (580 650 720 800 951 engine)

●Genuine part number (OEM): 278003012 etc.

●SGS starter relay
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.