Collection: Best Selling Products

JEEP Grand Cherokee Jeep

GF-WJ40
GF-WJ47
GH-WJ40
GH-WJ47

■Towing capacity: 750kg
■Mount: Slant low type ■Hitch ball: Short ball *Bolt-on installation *Compatible with 50mm square mounts

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Compatible models] YAMAHA Yamaha SHO (4 strokes)
[Application] Used to remove the engine drive shaft coupler.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI 1100-1200/4 stroke
[Application] Tool for holding couplings

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] KAWASAKI 550-900 engine
[Application] Tool for holding couplings

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●A tool for removing oil seals and bearings from the pump case.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel (chrome plated)

■Pin diameter: 6.4mm

●OEM #: 270000738, 270000886

[Applicable model] For SEA-DOO S3 hull model
Sea-Doo GTI/SE 130 1503 2013
Sea-Doo GTX 155 1503 2010-2016
Sea-Doo GTX LTD Super Charged 260 1503 2010-2016
Sea-Doo GTX LTD Super Charged 300 1503 2016
Sea-Doo GTX Wake Pro 215 1503 2010-2012
Sea-Doo RXT is 255 1503 2009
Sea-Doo RXT is 260 1503 2010-2012
Sea-Doo RXT X 260 1503 2010-2015
Sea-Doo RXT X 300 1503 2016

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●Easy to purchase and economical, essential for improving engine durability.

*For SEA-DOO 4TEC/SC/BVIC rear, it is (product number: 011-130).

●Equivalent to genuine product number: 270000885

[Compatible models] SEA-DOO 4TEC/SC/BVIC front
Sea-Doo GTI 1503 2006-2007
Sea-Doo GTI/SE 130 1503 2008-2017
Sea-Doo GTI SE 1503 2006-2007
Sea-Doo GTI SE 155 1503 2008-2017
Sea-Doo GTR 215 1503 2012-2016
Sea-Doo GTR 230 1503 2017
Sea-Doo GTR X 230 1503 2017
Sea-Doo GTX 1503 2002-2007
Sea-Doo GTX 155 1503 2008-2009
Sea-Doo GTX LTD Super Charged 185 1503 2003-2004
Sea-Doo GTX Super Charged 185 1503 2003-2004
Sea-Doo GTX Super Charged 215 1503 2008
Sea-Doo GTX Wake 1503 2003-2007
Sea-Doo GTX Wake Pro 215 1503 2009
Sea-Doo GTX Wake Super Charged 215 1503 2007-2008
Sea-Doo RXP Super Charged 215 1503 2004-2007
Sea-Doo RXP X 255 1503 2008-2011
Sea-Doo RXP X 260 1503 2012-2015
Sea-Doo RXP X 300 1503 2016
Sea-Doo RXT Super Charged 215 1503 2005-2009
Sea-Doo RXT X 255 1503 2008-2009

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●Equivalent to genuine product number: 270000882
*For SEA-DOO 4TEC/SC/BVIC front, it is (product number: 011-131).

[Compatible models] SEA-DOO 4TEC/SC/BVIC rear

Sea-Doo GTI 1503 2006-2007
Sea-Doo GTI/SE 130 1503 2008-2017
Sea-Doo GTI SE 1503 2006-2007
Sea-Doo GTI SE 155 1503 2008-2017
Sea-Doo GTR 215 1503 2012-2016
Sea-Doo GTR 230 1503 2017
Sea-Doo GTR X 230 1503 2017
Sea-Doo GTX 1503 2004-2007
Sea-Doo GTX 155 1503 2008-2016
Sea-Doo GTX LTD Super Charged 185 1503 2004
Sea-Doo GTX LTD Super Charged 215 1503 2006-2008
Sea-Doo GTX LTD Super Charged 255 1503 2009
Sea-Doo GTX LTD Super Charged 260 1503 2010-2016
Sea-Doo GTX LTD Super Charged 300 1503 2016
Sea-Doo GTX Super Charged 185 1503 2004
Sea-Doo GTX Super Charged 215 1503 2008
Sea-Doo GTX Wake 1503 2004-2007
Sea-Doo GTX Wake Pro 215 1503 2009-2012
Sea-Doo GTX Wake Super Charged 215 1503 2007-2008
Sea-Doo RXP Super Charged 215 1503 2006-2008
Sea-Doo RXP X 255 1503 2008-2011
Sea-Doo RXP X 260 1503 2012-2015
Sea-Doo RXP X 300 1503 2016
Sea-Doo RXT is 260 1503 2010-2012
Sea-Doo RXT Super Charged 215 1503 2006-2010
Sea-Doo RXT X 255 1503 2008-2009
Sea-Doo RXT X 260 1503 2010-2015
Sea-Doo RXT X 300 1503 2016-2017

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
Yamaha GP 800 2001-2002
Yamaha GP-R 800 2003-2005
Yamaha FX 1000 2005-2008
Yamaha FX 140 1000 2002-2004
Yamaha FX Cruiser 1000 2003-2008
Yamaha FX Cruiser HO 1100 2004-2008
Yamaha FX HO 1100 2004-2008
Yamaha V1 1100 2015-2016
Yamaha V1 Sport 1100 2015-2016
Yamaha VX 1100 2007-2009
Yamaha VX Cruiser 1100 2007-2017
Yamaha VX Deluxe 1100 2005-2017
Yamaha VX LTD 1100 2016-2017
Yamaha VX Sport 1100 2005-2015
Yamaha GP-R 1200 2000-2001
Yamaha GP-R 1300 2004-2008
Yamaha FX Cruiser HO 1800 2009-2015
Yamaha FX Cruiser SHO 1800 2008-2015
Yamaha FX Cruiser SVHO 1800 2016
Yamaha FX Cruiser SVHO LTD 1800 2017
Yamaha FX HO 1800 2009-2015
Yamaha FX SHO 1800 2008-2015
Yamaha FX SVHO 1800 2016
Yamaha FZR 1800 2009-2015
Yamaha FZS 1800 2009-2015
Yamaha GP 1800 2017
Yamaha VX Cruiser HO 1800 2016
Yamaha VXR 1800 2011-2014
Yamaha VXS 1800 2011-2014

●Genuine parts: 68A-44517-00-9M, 68A-44517-00-8P, 67X-44517-00-8P,
67X-44517-10-94, 67X-44517-00-5B, 67X-44517-10 equivalent

Engine motor mount.
It is essential for improving engine durability and is easy to purchase and economical.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models] YAMAHA 1200XLT(01-05)/XL-LTD(99-00)

●Genuine parts: 68N-44517-00, 68N-44517-00-8P, 68N-44517-00-94, 66V-44517-00-8P equivalent

Engine motor mount.
It is essential for improving engine durability and is easy to purchase and economical.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
Yamaha Wave Raider700 1994-1997
Yamaha Wave Raider Deluxe700 1995
Yamaha Wave Runner III700 1994-1995
Yamaha Wave Runner III700 1997
Yamaha Wave Venture700 19951996
Yamaha Wave Venture700 1998
Yamaha XL700 1999-2004
Yamaha Wave Runner GP800 1998-2000
Yamaha XL800 2000-2001
Yamaha XLT800 2002-2004
Yamaha GP1200 1997-1999
Yamaha XL1200 1998

●Genuine parts: 6M6-44517-00-5B, 6M6-44517-A1-8P, 6M6-44517-A1-5B equivalent

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
Yamaha FX1 700 1994-1995
Yamaha Wave Blaster 700 1993-1996
Yamaha Wave Blaster 760 1996-1997
Yamaha Exciter 220 1100 1996-1998

●Easy to purchase and economical, essential for improving engine durability.

●Genuine product number: 62E-44517-00-5B, 63M-44517-01-5B equivalent

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
Yamaha SuperJet650 1990-1993
Yamaha SuperJet700 1995-2017

Genuine parts: 6R7-44517-00-9M, 6R7-44517-00-8S equivalent

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models] SEA-DOO 800/951 rear
Sea-Doo GSX 800 1996-1997
Sea-Doo GSX RFI 800 1999-2000
Sea-Doo GTI LE RFI 800 2003
Sea-Doo GTX 800 1996-1997
Sea-Doo GTX RFI 800 1998-2002
Sea-Doo SPX 800 1997-1999
Sea-Doo XP 800 1995-1997
Sea-Doo GSX 951 1998
Sea-Doo GSX LTD 951 1998-1999
Sea-Doo GTX 951 2000-2002
Sea-Doo GTX DI 951 2000-2003
Sea-Doo GTX LTD 951 1998-1999
Sea-Doo LRV 951 2000-2001
Sea-Doo RX 951 2000-2002
Sea-Doo RX DI 951 2000-2003
Sea-Doo RX-X 951 2001
Sea-Doo XP 951 2000-2002
Sea-Doo XP DI 951 2003-2004
Sea-Doo XP LTD 951 1998-1999

●Easy to purchase and economical, essential for improving engine durability.

●Genuine product number: equivalent to 270000720
*For SEA-DOO 951/800 front, it is (product number: 011-108).

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●Easy to purchase and economical, essential for improving engine durability.

*SEA-DOO 951/800 rear version is (product number: 011-109).

●Equivalent to genuine product number: 270000722

[Compatible models] SEA-DOO 951/800 front
Sea-Doo GSX 800 1996-1997
Sea-Doo GTX 800 1996-1997
Sea-Doo SPX 800 1997-1999
Sea-Doo XP 800 1996-1997
Sea-Doo GSX 951 1998-1999
Sea-Doo GSX LTD 951 1997
Sea-Doo GTX 951 1999-2003
Sea-Doo GTX LTD 951 1998
Sea-Doo LRV 951 2000-2001
Sea-Doo RX 951 2000-2002

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

●Easy to purchase and economical, essential for improving engine durability.

●Genuine product number: 270000425 equivalent

[Compatible models] SEA-DOO 720/650/580
Sea-Doo GT 580 1990-1991
Sea-Doo GTS 580 1992-1996
Sea-Doo GTX 580 1992-1993
Sea-Doo SP 580 1989-1996
Sea-Doo SPI 580 1993-1996
Sea-Doo SPX 580 1993
Sea-Doo XP 580 1991-1992
Sea-Doo GTX 650 1994-1995
Sea-Doo SPX 650 1994-1995
Sea-Doo XP 650 1993-1995
Sea-Doo XPI 650 1994
Sea-Doo GS 720 1997-2001
Sea-Doo GSI 720 1997
Sea-Doo GTI 720 1996-2005
Sea-Doo GTI LE 720 2002-2004
Sea-Doo GTS 720 1997-2001
Sea-Doo HX 720 1995-1997
Sea-Doo SPX 720 1996
Sea-Doo SPX 800 1997

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
KAWASAKI Kawasaki
440 (77-92)
550 (82-94) *This cannot be used for models after 1994.

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
KAWASAKI 900, 1100, Ultra150 rear, 1200STX-R rear, ZXI, 12F, 15F

Kawasaki STS 900 2001-2002
Kawasaki STX 900 1997-2006
Kawasaki ZXi 900 1995-1997
Kawasaki STX 1100 1997-1999
Kawasaki STX DI 1100 2000-2003
Kawasaki ZXi 1100 1996-2003
Kawasaki STX-12F 1200 2003-2007
Kawasaki STX-R 1200 2002-2005
Kawasaki Ultra 150 1200 1999-2005
Kawasaki STX-15F 1500 2004-2017
Kawasaki Ultra 250X 1500 2007-2008
Kawasaki Ultra 260LX 1500 2009-2010
Kawasaki Ultra 260X 1500 2009-2010
Kawasaki Ultra 300LX 1500 2011-2013
Kawasaki Ultra 300X 1500 2011-2013
Kawasaki Ultra 310LX 1500 2014-2017
Kawasaki Ultra 310R 1500 2014-2017
Kawasaki Ultra 310X 1500 2014-2017
Kawasaki Ultra 310X SE 1500 2014-2017
Kawasaki Ultra LX 1500 2007-2017

*Ultra150/1200STX-R requires 1 piece for the front (product number: 011-102) and 2 pieces for the rear (product number: 011-103).

●Genuine parts: 92161-3789, 92160-3838 equivalent

●Easy to purchase and economical, essential for improving engine durability.

*The price shown is for one piece each.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models]
KAWASAKI Kawasaki Ultra150/1200STX-R Front
*Ultra150/1200STX-R requires 1 piece for the front (product number: 011-102) and 2 pieces for the rear (product number: 011-103).

●Easy to purchase and economical, essential for improving engine durability.

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible models] KAWASAKI Kawasaki
900STX(99-06),
1100STX(98-99),1100ZXi(98-03),
1200STX-R(02-05),
Ultra150(99-05)

●KEIHIN CDCV cab only
●This is a kit parts set for overhauling the carburetor.
●Please use it for regular carburetor overhaul.

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.

■Material: Steel plated
*The grip part is narrower type.

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

[Product specifications]
■Set of 1 each of plus (red) and minus (blue)
■Can be used up to 800 amperes.

[Applicable] The tip of the terminal (the thinnest part of the terminal)
Suitable for φ17.4mm positive type and φ15.8mm negative type.
■Can also be installed on types with bolts attached to the battery terminal.
■For D terminal
*Not available for positive type φ12.7mm and negative type φ11.1mm

A connector that can be connected to and removed from the battery terminal with a single touch.
Lift up the blue or red cap to loosen the terminal.
You can easily remove the wires from the battery. Attaching is the reverse operation.

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

It makes it easy to put on and take off with minimal strain.

■Material: Steel plated

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

[Product Specifications]
■Ideal for carrying spare fuel! Since it is a plastic tank, there is no need to worry about rust, and it is lightweight and easy to carry.

■The included nozzle has an air intake vent, allowing you to pour fuel smoothly.

■Size: Approx. 265 x 250 x 135 mm
■Aperture: Φ40mm
■Material: HDPE (high density polyethylene)
Capacity: 5 liters

*The product is a hazardous materials transport container that complies with international recommendations (UN standards) regarding the international transportation of hazardous materials.
*Although this product is UN certified, it may not be possible to fill it up at gas stations, including self-service stations.
*This product cannot be refueled and transported in a passenger vehicle for the purpose of using it as automobile fuel. (*1)
*This product cannot be used for refueling for storage purposes (*2).

(*1) Notification prescribing details of technical standards for the control of dangerous goods (Article 68-4), Regulations on the Control of Hazardous Materials (Article 43-2)
(*2) Fueling for storage purposes refers to fueling for stockpiling. This does not apply if the purpose is to use it immediately. There is no clear definition of the time between refueling and use.

■Roller diameter (A): 75.6mm
■Width (B): 127.0mm
■Shaft diameter (C): 16.0mm

●Hitch ball diameter: Compatible with 1-7/8", 2", 2-5/16".

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

[Compatible models]
KAWASAKI Kawasaki :KH
SEA-DOO: ALL (excluding SR/SRX/SRZ)
YAMAHA Yamaha: YQ(※)

(*) YAMAHA 760RZ/760VN, XL800 is compatible with product number "SL009".

[Compatible models] SEA-DOO
GTI (06-10)
GTI SE (06-10 model)
WAKE155(09～10)

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●Displayed prices Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO
GTX / GTX-L (07-09 model) *Excluding IS model

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●Displayed prices Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

[Compatible models]
SEA-DOO WAKE (2011-2017)

*WAKE Pro (2010-2017) product number: 295100720
*WAKE pro (2018) product number: 295100697

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO
GTR215 (2012-2017)
GTR230/GTR-X230(2017-2019)
*GTR-X product number: 295100721 ​​(280000543)

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTI / GTI SE / GTI Limited

GTI130 / GTI SE130 / 155 / GTS
*All compatible with 2011 models and later

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO
RXP-X (2012-2017)
GTR-X

280000543

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models]
SEA-DOO WAKE PRO (2010-2017)
*WAKE (2011-2017) product number: 295100724
*WAKE Pro (2018) product number: 295100697

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTX/RXT series (2010-2017) *Model without suspension
GTX 155/215／Limited
GTX Limited
RXT 260
RXT-X260 / RXT-X300RS
*GTX series with iS (2017), GTX-S product number: 295100718
*GTX series with iS (2009-2016) product number: 280000460
*RXT-Xas (with suspension) product number: 280000586

●SEA-DOO genuine PWC cover.
●Designed for a perfect fit and made of fabric with excellent UV resistance.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*
-------------------------------------------------- ------------------------
●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc.
Please note that in that case, we will contact you before shipping.

[Compatible models] SEA-DOO GTX *Model with IS (suspension)
GTX S155(2012-2016)
GTX Limited S (2017)

*For GTX series without iS, product number: 280000472
*GTX Limited iS (2009-2016) product number: 280000460

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Compatible models] SEADOO SPARK for 3 people

*Previously, the shape of the product differed depending on whether or not the accessory part "adjustable riser" was installed, but now it is the same for all types.
Please note that there may be cases where the item comes with tabs.
295100789 (old product number: 280000688 / 295100707)

Genuine SEADOO PWC cover. Strapless design for easy installation.
The fabric is dyed to provide added UV protection.
Other features include a patented air release vent system for trailer transport,
It comes with an interior pouch for storing the cover when not in use.

[Information regarding genuine products]
※This is a made-to-order product※
*This product is a genuine product and cannot be cancelled or returned after ordering*
-----------------------------------------------------------------------------
●When selecting a product, please be sure to check the following items before placing your order.
Please carefully check 1. the manufacturer, 2. the model name (common name), 3. the year of manufacture, etc. before purchasing.
●The displayed price and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers and price changes. In that case, we will contact you before shipping. Please note in advance.

[Compatible models] SEADOO SPARK for two-seaters *Previously, the shape differed depending on whether or not the accessory part "adjustable riser" was installed, but now it is the same for all types.
*Therefore, please be aware that there may be cases where the item comes with tabs.
295100671 / 295100706 / 295100912

Genuine SEADOO PWC cover. Strapless design for easy installation.
The fabric is dyed to provide added UV protection.
Other features include a patented Air Release Vent System for trailer transport and an interior pouch to store the cover when not in use.

[Information regarding genuine products]
※This is a made-to-order product※
*This product is a genuine product and cannot be cancelled or returned after ordering*

●When selecting a product, please be sure to check the following items before placing your order.
Please carefully check 1. the manufacturer, 2. the model name (common name), 3. the year of manufacture, etc. before purchasing.
●The displayed price and specifications are subject to change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers and price changes. In that case, we will contact you before shipping. Please note in advance.

[Compatible models] SEADOO
SPARK

This is the part that serves as the inlet for the water flow that sends water to the pump, and has the effect of improving the grip on the water surface.

intake gate

[Adaptation]
YAMAHA SVHO/SHO (for YS/YV)

SOLAS impeller drive shaft holder