Collection: Best Selling Products

■Lens color: Gray smoke lens

■Heat press foam plastic frame
■100% UV protection polycarbon lens
■Excellent fit with adjustable rubber strap!
■Air ventilation port prevents lens fogging
■With mesh soft case
■Even if you drop it, it will float on water, so you don't have to worry about it.
■Frame size 16.0x5.0cm

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

■Compact, high-strength, high-corrosion-resistant stainless steel

■With 2-way ratchet lock

■The lever uses a thick deluxe grip that makes it easy to apply force.

■There is no gear slippage due to the adoption of a double gear mechanism.

■Main body and lever all stainless steel

■Gear ratio: 4:1

■Material: Stainless steel

■Maximum towing load: 727kg / 1600LBS

■Handle length: 170mm

*Body/handle only.

*Winch strap is not included.

With safety nut washer

■Size (A×B×C): 90×88×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 70×63×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

With safety nut washer

■Size (A×B×C): 60×97×φ10
■Material: Stainless steel

[Contents]
・U bolt x 1
・Nylon lock nuts x 2
・Washer x 2

outback

[Compatible model] BS9

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outback

[Compatible model] BS9

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

outback

[Compatible model] BS9

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Exiga crossover 7

[Compatible model] YAM

*Styling package not allowed

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole drilling required Styling package NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

crossover 7

[Compatible model] YAM

*Styling package not allowed

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole drilling required Styling package NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Exiga crossover 7

[Compatible model] YAM

*Styling package not allowed

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole drilling required Styling package NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Exiga

[Compatible model] YA5

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction power] B
[Ball mount] B-4
[Installation difficulty] ☆☆
Hole drilling required Styling package NG
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*For exclusive use with rear under spoiler
*"Lancaster" NG

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Drilling required "Lancaster" NG Only for with rear under spoiler
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*For exclusive use with rear under spoiler
*"Lancaster" NG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Drilling required "Lancaster" NG Only for with rear under spoiler
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*For exclusive use with rear under spoiler
*"Lancaster" NG

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Drilling required "Lancaster" NG Only for with rear under spoiler
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

impreza sport wagon

[Compatible model] LA-GG2/3/GGA

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is made of chrome plated steel, and the detachable pin is also plated with steel.

*******************************************
[Traction power] B
[Ball mount] B-5
[Installation difficulty]☆
WRX unconfirmed
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*"Lancaster" NG/With rear under spoiler NG

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling “Lancaster” NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*"Lancaster" NG/With rear under spoiler NG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling “Lancaster” NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Legacy

[Compatible model] BH5/9

*"Lancaster" NG/With rear under spoiler NG

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty] ☆☆
Required hole drilling “Lancaster” NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SG5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SG5

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SG5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SF5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SF5

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SF5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

impreza wagon

[Compatible models] GF1/6/8/GC1/8

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
Grade "WRX" NG
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

impreza wagon

[Compatible models] GF1/6/8/GC1/8

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
Grade "WRX" NG
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

impreza wagon

[Compatible models] GF1/6/8/GC1/8

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-9
[Installation difficulty]☆
Grade "WRX" NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

■Material: T bolt, nylon nut all made of stainless steel

[Product specifications]
■Tightening range/clamp width/quantity

JL52-635714: 63.5~71.4mm / 19.0mm / 1 piece
JL52-826905: 82.6~90.5mm / 19.0mm / 1 piece
JL52-11431222: 114.3~122.2mm / 19.0mm / 2 pieces
JL52-15241651: 152.4~165.1mm / 19.0mm / 1 piece

Definitely recommended for models with a supercharger.
Traditional hose clamps will collapse if you tighten them too much, and fall out if you don't tighten them too much...
There was such a problem, but the tightening torque can now be managed.

With heavy duty high torque clamp,
Boasts torque performance more than three times that of normal worm gear clamps.
It is mainly used in exhaust and intake areas where vibration is likely to occur.
Tighten the T-bolt with a lock nut, so you don't have to worry about it coming loose.
It also has a structure that tightens the hose evenly, so you can grip the hose firmly.

The bolts and nuts are also made of rust-resistant SUS.
The nut uses a stainless steel nylon nut that is hard to loosen.
Adopts a ROLLED-EDGE design (R processing on both ends of the band makes it difficult for the hose to get wedged).

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Material: Main body = SUS304

Size: d=10 L=80 L1=60 B=44 B1=24 S=18

Weight: 100g

Working load: 70Kg

Material: Main body = SUS304

Size: L=72 L1=55 B=39 B1=22 S=18 T=7

Weight: 60g

Working load: 50Kg

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

09-FF701C Hose diameter 1/4" (outer diameter 8mm inner diameter 4mm) length 2" (approx. 50mm)

●Used on fuel lines and water lines to prevent dirt from entering the carburetor.
●Replaceable type (cannot be cleaned).
●Made of plastic.

[Material] Stainless steel
[Quantity] 500 pieces
Size: width 10mm x foot length 10mm

■Bolt size AxBxC: 100x88xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 110x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 97x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 100x60xφ12

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Bolt size AxBxC: 63x100xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2