Collection: Best Selling Products

[Manufacturer] TOYOTA
[Car model] Estima Emina Lucida
[Compatible car model] TCR10G/11G/20G/21G CXR10G/11G/20G/21G
[Year] H7.1-H8.8
[Compatible grades] Compatible with all grades [Supplement] Excluding G Luxury

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] T-2
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] NOAH
[Compatible car model] TA-AZR65-ARSQH/ARSSH/ARSEH CBA-AZR65G-AREEH/ANENH
[Year] H13.11-H19.5
[Compatible grades] L, S, X (including V/G selection), YY

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling] 4
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Basara
[Compatible car model] GF-JU30 KH-JVNU30
[Year] H10.6-H12.3
[Compatible grade] X, V

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-2
[Processing] D-3
[Drilling] 5
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Delivery to corporations/companies and limited delivery to some private homes We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] RAV4
[Compatible car models] TA/UA-ACA20W(3DR4WD) TA/UA-ACA21W(5DR4WD) TA/UA-ZCA26W(5DR2WD) CBA-ACA21W
[Year] H12.5-H17.10
[Compatible grade] X, Aero Sport, Wide Sport [Supplement] Not confirmed for 3-door 2WD vehicles

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] T-4
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] Ipsum
[Compatible car model] SXM10G/15G
[Year] H10.4-H13.5
[Compatible grades] Standard, L-SELECTION, E-SELECTION, AERO TOURING [Supplement] Not confirmed to be installed on diesel vehicles

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling] 1
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] bB
[Compatible car model] CP-30/31
[Year] H12.2-H15.4
[Compatible grades] Z, ZX VERSION, S, SX VERSION [Supplement] Cannot be installed on 4WD vehicles

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Serena
[Compatible car models] GF-PNC24/PC24, KH-VNC24/VC24, UA-TNC24/TC24/RC24
[Year] H11.6-H17.4
[Compatible grades] X, 25X, J, V, Highway Star, 25 Highway Star, Limited Edition, Kid's version, Kitakitsune, Coleman version, Coleman version II [Supplement] Rider and Rider Plus cannot be installed.

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling] 1
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Stagea
[Compatible car model] C34
[Year] H8.9-H13.10
[Compatible grades] Compatible with all grades [Supplement] H10.8 ~ Bracket cut inside bumper included

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-1/(K-2)
[Drilling] 2
[Wearing time] 4 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] Town Ace Noah
[Compatible car models] GA/GC-KR42V, KF/KJ-CR52V, KD/KB-CR51V, KD/KH-CR40G/50G, E/GF-SR40G/50G
[Year] H8.10 - H13.11
[Compatible grade] Royal Lounge/Super Extra/LD/V/G/L

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] T-1/3
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Mistral
[Compatible car model] R20
[Year] H6.6-H10.8
[Compatible grades] All grades; Compatible [Supplement] KR20 cannot be installed

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Terrano/Terano Reglas
[Compatible car models] KD-RR50/PR50, E-LR50/JLR50 GF-LR50/JLR50, KH-TR50/JTR50
[Year] H7.9-H14.8
[Compatible grades] Compatible with all grades

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-2
[Processing] T-2
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] TOYOTA
[Car model] RAV4
[Compatible car model] SXA10G/10W/10C/11G/11W/ 15G/16G
[Year] H6.5-H12.5
[Compatible grades] Compatible with all grades

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] T-1/2
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] Terrano/Terano Reglas
[Compatible car model] VBYD/WBYD/WHYD/LBYD21
[Year] S61-H7.8
[Compatible grades] Compatible with all grades

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

TOYOTA Land Cruiser PRADO 150 series Modellista late model

CBA-TRJ150W
CBA-GRJ151W
LDA-GDJ150W
LDA-GDJ151W
Compatible year: Late model (September 2017 - June 2021)
*Square dual muffler compatible

■Towing capacity: 750kg
■Mount slant type low ■Hitch ball short

*For models released after June 2021, there will be interference due to a slight change to the Modellista aero shape.
*Square dual muffler compatible *Bolt-on installation *50mm square mount compatible

Towing capacity: C (less than 750kg)
Estimated installation time: Approximately 4 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Stainless steel hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

TOYOTA Land Cruiser PRADO 150 series Modellista late model

CBA-TRJ150W
CBA-GRJ151W
LDA-GDJ150W
LDA-GDJ151W
Compatible year: Late model (September 2017 - June 2021)
*Square dual muffler compatible

■Towing capacity: 750kg
■Mount slant type low ■Hitch ball short

*For models released after June 2021, there will be interference due to a slight change to the Modellista aero shape.
*Square dual muffler compatible *Bolt-on installation *50mm square mount compatible

Towing capacity: C (less than 750kg)
Estimated installation time: Approximately 4 hours

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

Land Cruiser PRADO 150 series Modellista early model TOYOTA
*Rear skirt cannot be installed

[Compatible car model] CBA-TRJ150W, CBA-GRJ150W

■Towing capacity: 750kg
■Mount: Slant low type ■Hitch ball: Short ball *Bolt-on installation *Compatible with 50mm square mounts

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Stainless steel hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

●For adjustable tower (75x45) ●When moving the trailer, use the carry handle for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when in a low position!

■Material: Steel ■Includes: Reinforcement stay, chain wire & electrode connector holder included.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

●For adjustable tower (75x45)
●When moving the trailer, the carry handle allows for easy movement and smooth connection to the car.
●Pushing, pulling, and lifting are easier than conventional handles, eliminating inconveniences such as not being able to apply force when sitting in a low position!

■Material: Stainless steel
■Includes: Reinforcement stay, chain wire & electrode connector holder included.

●Tight Japan genuine product.

■Material: Black resin

●Tight Japan genuine product.

■Material: Aluminum

[Compatible models] SEADOO SPARK

OEM #:420431640

Sea-Doo GTI-SE HO900 2017
Sea-Doo GTS HO900 2017
Sea-Doo Spark 900 2014-2017
Sea-Doo Spark HO900 2015-2017

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Stainless steel hitch (SHC)]
Main bar, accessories (ball mount, hitch ball, detachable pin) made of stainless steel

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Steel/New Hitch (NHC)]
Main bar (oval type) steel
All accessories (excluding ball mount) are made of steel.

【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero late model (H29.8 minor change or later)

[Compatible model] URJ201W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

[Traction force] C
[Ball mount] B-7
[Installation difficulty] ★☆☆☆☆
Compatible with Modelista Aero for late models (H29.8 minor change or later)

[Half stainless steel/combi hitch (CHC)]
The main bar is made of steel
Accessories (ball mount, hitch ball, detachable pin) are made of stainless steel.

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be shipped by sea.

Compatible with Lexus LX Modelista Aero for earlier models

[Compatible model] URJ201W

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction force] C
[Ball mount] B-7
[Installation difficulty]☆
Compatible with Modelista Aero for earlier models
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Hydraulic inertia brake for disc brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For drum brakes, product number ST-148-01

For drum brakes

[Product specifications]
■Ball diameter: 2 inch compatible

*For disc brakes, part number ST-148-02

For ST-004 and ST-021 hubs.

Size: W1/2-20

●For trailer installation. Comes with bolts. *Type with mounting holes on both left and right sides.

■Size: 156mm on one side
■Left and right screw pitch: 110mm

●A hub and bolt set.
●12-inch wheels for wide tires
●5 holes PCD114.3 ●Offset +0

[Requests and notes when ordering]
*Shape and price may vary depending on the car model.
Regarding product arrangement, the following is required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*As this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).

[Product specifications]
■Hitch ball diameter: 2 inches
■Mounting frame width: 75mm compatible (inner dimensions: width 76mm x height 50mm)
■Material: Steel plating

*The following products are also available for external customers.
[Product number: Ball diameter/mounting frame width]
TC-03 2 inches/75mm

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

This bracket is compatible with both steel and aluminum wheels placed in any position on the trailer.
*It may not be possible to install depending on the trailer model.

---[Request when ordering]---------------------------------------- ----------
Regarding product arrangement, the following will be required.
Please be sure to fill in the following four pieces of information in the requests/remarks column when ordering.
1●Mounting position: (select from tongue or side frame)
2●Trailer model name
3●Trailer year
4● Stamped number (number stamped on the front of the trailer)
Example: Notation like [Oka] ~ [Oka]←, where [] is Oka/Country
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -----------------------

●Foldable, large diameter hole.

■Wheel size: 8 inches (20.3cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 679kg
■Stroke: mm

Protector only.
●A bearing protector that allows you to fill the hub with grease from the grease nipple without removing the dust cap.

●Marine trailers are often submerged in seawater, etc. with their hubs, so constant maintenance such as replenishing grease is required to protect the bearings. This protector is very convenient.

■Material: Stainless steel
■Applicable hub cap size: 50.8mm

When parking the trailer, make sure the trailer is kept level.
Trailer
Convenient for driving and moving. Double tires provide stability.
.

●Foldable type.

■Wheel size: 6 inches (15.2cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 453kg
■Stroke: mm

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]